Thermo Scientific Smart-Vue Bedienungsanleitung

Thermo Scientific

Smart-Vue

1HWZRUN5HFHLYHU

Installation 0DQXDO

316266H0January 2011

Disclaimer and limitation of liability

Thermo Fisher Scientific assumes no responsibility for any loss or claims by third parties which may arise

through the use of this manual and the information contained herein. This document is non-contractual and

subject to change without notice.

Thermo Fisher Scientific’s liability is subject to its standard terms and conditions of sale.

Do not open the product casing and do not disassemble or modify internal components in any manner

whatsoever. Thermo Scientific products do not contain any internal components that require user intervention

or repair. If the product or device shows signs of improper operation, disconnect it immediately from its power

source and contact Thermo Scientific technical services so that the device can be examined under proper

conditions.

Release history:

Initial release January 2011

Table of Contents

Thermo Fisher Scientific Smart-Vue Network Receiver (TCP/IP) Installation Guide iii

Table of Contents

Notices .....................................................................................1

Safety instructions....................................................................1

Electrical warning.....................................................................1

FCC statement.........................................................................1

Conformity with European regulations ....................................2

WEEE compliance...................................................................2

Environmental protection ........................................................2

RoHS compliance ....................................................................2

Disclaimer and limitation of liability........................................2

Introduction .............................................................................3

Package contents ......................................................................3

Product overview ......................................................................4

Smart-Vue network receiver .....................................................4

Typical installation...................................................................5

How it works ...........................................................................5

Requirements and recommendations ........................................6

General requirements and recommendations............................6

System requirements ................................................................7

Where to find more information..............................................7

Installation procedure ...............................................................8

Before you begin ......................................................................8

Installing drivers and port redirection software.........................9

Lantronix Device Installer wizard...........................................10

Lantronix CPR InstallShieldwizard.....................................10

Configuring receiver IP and serial parameters.........................11

Adapting the receiver to your network....................................11

Placing your network receiver for best performance................13

Activating your network receiver ............................................13

Configuring the network receiver as a COM port ..................14

Testing the connection...........................................................18

Configuring network receivers in Smart-Vue Client ...............20

Adding a new network receiver...............................................20

Where to find more information.............................................22

Appendix ................................................................................23

Configuring your firewall.......................................................23

Note about anti-virus software................................................25

Troubleshooting .....................................................................26

Contact information ...............................................................27

Specifications..........................................................................29

Warranty statement ................................................................30

Declaration of conformance....................................................31

Thermo Fisher Scientific Smart-Vue Network Receiver (TCP/IP) Installation Guide 1

Notices

Safety instructions

IMPORTANT NOTE: Do not use this product for protection or as part of

automated emergency system or as for any other application that involves

protecting people and/or property. Customers and users of Thermo

Scientific products are responsible for making sure that the product is fit for

the intended usage. Do not open the product casing and do not disassemble

or modify internal components in any manner. Thermo Scientific products

do not contain any internal components that require user intervention or

repair. If the device shows signs of improper operation, disconnect it

immediately from its power source and contact Thermo Fisher Scientific

technical services.

Electrical warning

When using this device with an AC adapter (100-240V AC – 5V DC),

always use the specific adapter provided by your supplier (same brand, same

product reference). Do not open the adapter yourself and do not dismantle

internal components or modify them in any manner. The adapter does not

contain any user-reparable parts. If the adapter shows any sign of

malfunction, unplug it immediately and contact Thermo Fisher Scientific

for repair or replacement. Do not connect the adapter to a device or

peripheral other than the Thermo Scientific product for which it was

intended. Unplug the power cable from the electrical outlet when adapter is

not in use.

Do not cause a short-circuit with the electrical plug. Do not force either the

AC or DC plug. Before removing the connector from the Smart-VueTM

module or unplugging power cables, first unplug the cable from the power

outlet. Do not subject adapter to physical shock, which could cause serious

malfunction or damage. Do not use or place the adapter in a wet or humid

location. This adapter is not waterproof.

FCC statement This paragraph pertains to 915 MHz Smart-VueTM wireless modules. This

device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation: FCC Part 15

§107 - §109 - §207 - §247 (Ed 2008).

Notices

2 Smart-Vue Network Receiver (TCP/IP) Installation Guide Thermo Fisher Scientific

Conformity with

European regulations This paragraph pertains to 868 MHz Smart-Vue wireless modules. The CE

mark on this product indicates that Thermo Fisher Scientific declares that

this product is compliant with Radio equipment and Telecommunications

Terminal equipment (R&TTE) directive 1999/5/EC and the Low Voltage

Directive (LVD) 2006/95/EC. The following standards were utilized to

meet the essential requirements of these directives: EN 301 489-3 v1.4.1

(02), EN 300 220-2 V2.1.2 (R&TTE) & EN 60950-1:2006/A11:2009

(LVD).

The most current EC Declaration of Conformity may be downloaded from

the Smart-Vue World Wide Web at:

www.thermoscientific.com/Smart-Vue

Caution: Any changes or modifications not expressly approved by Thermo

Fisher Scientific could void the user's authority to operate the equipment.

WEEE compliance This wireless device complies with the essential requirements and other

relevant provisions of the Waste Electrical and Electronic Equipment

Directive 2002/96/EC (WEEE Directive).

Environmental

protection Please respect local regulations concerning disposal of packaging, unused

wireless devices and their accessories, and promote their recycling.

RoHS compliance The wireless device is in compliance with the restriction of the use of certain

hazardous substances in electrical and electronic equipment Directive

2002/95/EC

(RoHS Directive). Do not dispose of this product with household trash.

Thermo Fisher Scientific recycles this product under certain conditions.

Please contact us for more information.

Introduction

Thermo Fisher Scientific Smart-Vue Network Receiver (TCP/IP) Installation Guide 3

Introduction Congratulations and thank you for choosing the Thermo Scientific

Smart-VueTM Network Receiver (TCP/IP). This guide describes how to add

a network receiver to your Smart-Vue system.

Plugged into your local Ethernet network, this receiver collects data

wirelessly from various types of Smart-Vue end-point modules, including

temperature, humidity and other sensors, and transfers it to the Smart-Vue

Server data monitoring software.

Network receivers are particularly useful when you need to read one or more

groups of Smart-Vue modules that are located remotely from the Smart-Vue

Server computer used to monitor the data.

Installation requires knowledge of your organization’s IP addresses,

particularly static IP addresses. If you do not have access to this information,

contact your system administrator for assistance before starting this

installation.

Package contents • Smart-Vue Network Receiver module

• RJ-45 Ethernet cable - 2 meters (6.5 ft)

• AC adapter (100v-240 V AC 50/60 Hz to 5V DC 1 Amp, four

international plugs)

• External antenna

• Mounting kit

• Smart-Vue CD-ROM with the following:

• Smart-Vue Server/Smart-Vue Client software for configuring

and managing your network

• Lantronix drivers and CPR Manager® port redirection

software

• Technical manuals, including installation guides and the

comprehensive Thermo Scientific Smart-Vue Software User

Manual.

Product overview

4 Smart-Vue Network Receiver (TCP/IP) Installation Guide Thermo Fisher Scientific

Product overview Installed on your Ethernet network, Thermo Scientific Smart-Vue Network

Receivers provide a link for transferring data between your system’s

Smart-Vue Server application and groups of Smart-Vue end-modules. The

Smart-Vue modules automatically and wirelessly transmit measurement data

collected from various types of sensors, as well as alarms in case anomalies

are detected.

Smart-Vue network

receiver A network receiver does the following:

• Collects data transmitted by end-point modules and forwards it to the

Smart-Vue Server database (from which users manage and access their

modules transparently using Smart-Vue Client)

• Transmits configuration and on-demand read requests from client

software to end-modules

• Includes a 10/100BT RJ-45 connector

• Has a range from 25-100 meters (65-325 ft.) indoors up to

approximately 700 meters (2,300 ft.) in line of sight

• Supports an unlimited number of end-point modules

Figure 1. Network receiver (TCP/IP)

Antenna

RJ-45 Ethernet jack

Activity and power indicators

AC adapter plug

Product overview

Thermo Fisher Scientific Smart-Vue Network Receiver (TCP/IP) Installation Guide 5

Typical installation The following diagram shows two examples of a typical installation with

network receivers.

Figure 2. Figure 2 – Network receivers may be placed anywhere in your

network

How it works In the Smart-Vue Client monitoring application, the Smart-Vue Network

Receiver functions as if it were connected directly to your Smart-Vue Server

computer, like a serial or USB receiver.

The difference is that the receiver resides on the Ethernet network and

communicates via TCP/IP. The provided Lantronix port redirection

software enables your computer to access the network receiver via a virtual

COM port. After setting up the port redirection software, you select the

appropriate COM port to include the network receiver in your Smart-Vue

monitoring system.

(optional)

Requirements and recommendations

6 Smart-Vue Network Receiver (TCP/IP) Installation Guide Thermo Fisher Scientific

Requirements and

recommendations This installation guide does not cover the installation of Smart-Vue

end-point modules or Smart-Vue Server/Smart-Vue Client software. Please

see the documentation (e.g., the Thermo Scientific Smart-Vue Server/Client

/USB-Serial Wireless Receiver manual and the Thermo Scientific Smart-Vue

Software User Manual on the CD-ROM) provided with your software if

you need information regarding Smart-Vue Server/Smart-Vue Client

software installation.

For the purposes of this installation guide, we assume the following:

• Smart-Vue Server/Smart-Vue Client software is installed and configured,

and you have access rights to make changes.

• You have experience with networks, COM ports and TCP/IP. If not,

contact and work with your system administrator.

General requirements

and recommendations • The personal computer (PC) running Smart-Vue Server software runs

continuously, 24/7/365, and should be connected to an Uninterruptible

Power Supply (UPS) that protects against power surges and provides

power to back up the PC and components.

• The AC adapter used for your network receiver (if applicable) should

also be plugged into the UPS.

Note If your network receiver is on the other side of a router or a remote

firewall, then UDP ports 30718, 43282 and 43283 may need to be added to

the firewall’s exclusion list. You may experience trouble opening this COM

port if these UDP ports are not excluded. Please check with your system

administrator for help.

• The UPS is also recommended as a power backup for your

communication/network systems.

• Weekly manual system testing (e.g., pulling a probe, verifying the

communications system is working) is recommended.

• Recommended maintenance and calibration procedures should be

followed.

• If you are storing cold products, Thermo Fisher Scientific recommends

use of a back-up cooling system (e.g., CO2 or LN2) to maintain freezer

chamber temperature below the critical level should a power failure

occur. Contact your local sales representative for more information.

Requirements and recommendations

Thermo Fisher Scientific Smart-Vue Network Receiver (TCP/IP) Installation Guide 7

• Thermo Fisher Scientific recommends that Installation and Operational

Qualifications (IQ/OQ) be performed before initial use.

• For timely notification of an emergency/alarm, it is critical to establish

primary, secondary and tertiary call-out procedures with escalation so

contact is not dependent on reaching one individual. Ideally, ultimate

contact is with a security department or company with 24/7

monitoring.

Please see the Thermo Scientific Smart-Vue Software User Manual for an

in-depth description of Smart-Vue end-point module configuration, alerts,

notification, data management and general system features.

System requirements Do not install Smart-Vue Server on a laptop computer.

• PC running the following Microsoft Windows 32 bit systems:

• Operating systems supported:

• Windows 2000 SP4

• XP Pro SP2 or later

• Vista Home, Business, Ultimate, and Enterprise,

• Windows Server 2000, 2003 and 2008

• 10/100 Mbit Ethernet network (TCP/IP)

• CD-ROM drive to install the Lantronix drivers and port configuration

software

• Internet browser for accessing the receiver’s on-board settings

• Administrator rights for the computer on which you are installing the

Lantronix drivers for the network receiver.

• UPS sized appropriately for your power and system requirements. Make

sure you follow the manufacturer’s maintenance recommendations.

Where to find more

information This guide leads you through basic installation steps to get you started with

your product. For more details, please see the Thermo Scientific Smart-Vue

Software User Manual. You may click on Help ==> User manual to open it

directly from within the Smart-Vue Client software.

Andere Handbücher für Smart-Vue

Inhaltsverzeichnis

Andere Thermo Scientific Empfänger Handbücher

Thermo Scientific

Thermo Scientific Smart-Vue Pro Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung