THORLABS PM100USB Bedienungsanleitung
Quick Reference
Thorlabs Instrumentation
Optical Power and Energy Meter
PM100USB
2009
Safety Attention
All statements regarding safety of operation and technical data in
the instruction manual will only apply when the unit is operated
corectly.
The power meter PM100D must not be operated in explosion
endangered environments!
Sensor, photodiode and control inputs and outputs must only be
connected with duly shielded connection cables.
Only with written consent from Thorlabs may changes to single
components be carried out or components not supplied by
Thorlabs be used.
Do not remove covers!
Refer servicing to qualified personal!
1 General Information and Physical Overview
The PM100USB Optical Power and Energy Meter is designed to measure the
optical power of laser light or other monochromatic or near monochromatic light
sources and the energy of pulsed light sources with an external PC that is
connected via USB interface.
The PM100USB is compatible to all Thorlabs “C-Type” Photodiode, Thermal,
Pyroelectric sensors, and custom Photodiode, Thermal and Pyroelectric detectors.
The provided software, including drivers and applications for LabVIEW and C
makes it easy to integrate the instrument in test and measurement systems.
All software and commands are compatible and interchangeable with the PM100D
handheld power and energy meter and with the PM100A handheld optical power
meter.
FrontView RearView
Power / Energy -
Sensor Connecto
r
USB
Connecto
r
USB Device is
read
y
to o
p
erate
Sensor detected
and ready for
o
p
eration
2 Getting Started
2.1 Unpacking
Inspect the shipping container for damage.
If the shipping container seems to be damaged, keep it until you have inspected
the contents and you have inspected the PM100USB mechanically and electrically.
Verify that you have received the following items.
1. PM100USB power/energy meter
2. USB cable, type ‘A’ to ‘mini-B’
3. Quick-start guide
4. USB memory stick with instrument drivers, user application and operation
manual
5. Certificate of Calibration
2.2 Installation and Preparation
1.For proper installing the PM100USB it requires a NI-VISA runtime version on
the PC (available on the National Instruments website www.ni.com or from the
data carrier that comes with the instrument. Allow installing and follow the
dialog instructions.
2.Install the PM100 Utility software from the data carrier. You can chose a
convenient auto-run function of the data carrier by browsing to the folder
‘Autorun’ and executing ‘autorun.exe’.
3.Interlink the USB cable with its male type ‘A’ connector at the PC side and the
‘Mini B’ type connector on the instrument side. The PM100USB gets its opera-
tion power from the PC via the USB cable. When connecting the PM100USB
first time to a PC, sequent a new hardware ‘PM100USB test and measurement
device’ and a ‘DFU device’ will be recognized; please allow installing. After
successful installation the ‘USB LINK’ LED in the rear panel lights up and the
unit is ready to operate.
4.Connect a suitable power or energy sensor. The sensors are ‘hot swappable’
and have a self-fixing mechanism. To plug or unplug a sensor slightly press
from both sides on the pins in the connector housing. After recognizing a valid
sensor and downloading its information and calibration data the ‘SENSOR’ LED
in the rear panel lights up.
5.Run the PM100 Utility software and confirm the connected PM100USB.
For more information, please refer to the detailed user manual that is provided on
the data carrier that shipped with the PM100USB.
3 Addresses
Our Company is represented by several distributors and sales offices throughout
the world.
Europe
Thorlabs GmbH
Hans-Boeckler-Str. 6
D-85221 Dachau
Germany
Sales and Support
Phone: +49 (0) 8131 / 5956-0
Fax: +49 (0) 8131 / 5956-99
Email: [email protected]
Web: www.thorlabs.com
USA
Thorlabs, Inc.
435 Route 206 North
Newton, NJ 07860
USA
Sales and Support
Phone: 1-973-579-7227
Fax: 1-973-300-3600
Email: [email protected]
Email: [email protected]
Web: www.thorlabs.com
Japan
Thorlabs, Inc.
Higashi Ikebukuro Q Building 1st floor
2-23-2, Higashi Ikebukuro, Toshimaku
Tokyo 170-0013
Japan
Sales and Support
Phone: +81-3-5979-8889
Fax: +81-3-5979-7285
Email: [email protected]
Web: www.thorlabs.jp
Please call our hotlines, send an Email to ask for your nearest distributor or just
visit our homepage
http://www.thorlabs.com
Copyright©2009, Thorlabs, Germany
19570-D02 Rev B M0009-510-614
Andere Handbücher für PM100USB
2
Inhaltsverzeichnis
Andere THORLABS Messgerät Handbücher
THORLABS
THORLABS PM10-3 Bedienungsanleitung
THORLABS
THORLABS PM100USB Bedienungsanleitung
THORLABS
THORLABS CC6000 Bedienungsanleitung
THORLABS
THORLABS HNLS008R Bedienungsanleitung
THORLABS
THORLABS HRS015B Bedienungsanleitung
THORLABS
THORLABS PM10-3 Bedienungsanleitung
THORLABS
THORLABS LDM21 Bedienungsanleitung
THORLABS
THORLABS EVOA1550F Bedienungsanleitung
THORLABS
THORLABS PM200 Bedienungsanleitung
THORLABS
THORLABS TSP01 Bedienungsanleitung
THORLABS
THORLABS PDA20H Bedienungsanleitung
THORLABS
THORLABS SA200 Series Bedienungsanleitung
THORLABS
THORLABS Redstone OSA305 Bedienungsanleitung
THORLABS
THORLABS PDA100A Bedienungsanleitung
THORLABS
THORLABS GSL Series Bedienungsanleitung
THORLABS
THORLABS CCS Series Bedienungsanleitung
THORLABS
THORLABS M2MS-BC106N Series Bedienungsanleitung
THORLABS
THORLABS PM100D Bedienungsanleitung
THORLABS
THORLABS SP USB Series Bedienungsanleitung
THORLABS
THORLABS LLD1530 Bedienungsanleitung
