Tiandy TC-D2410-AW Bedienungsanleitung
1
OUTDOOR SPEED BOME CAMERA
User’s Manual
Before attempting to connect or operate this product, please
read these instructions completely
MINI HIGH SPEED DOME CAMERA
2
Contents
Important Safety Instructions………………………………………3
Caution…………………………………………………………………………4
Introduction……………………………………………………………………5
Drawing………………………………………………………………7
Connection……………………………………………………………8
Installation ……………………….……………………………………9
ID code setting……………………………………………………... 10
Protocol setting………………………………...…………………… 11
Setting Baud Rate…………………………………………………………….12
Setting Protocol of zoom camera …..…………………………….. 12
Operation…………………………………………………….…….. . 13
Camera OSD menu…..………………………………………………16
Operation of zoom camera…………………………………….……17
The OSD menu setting………………………...………………..…20
B01 Protocol………………………………………………………..…..32
Debugging………………………………………………………………34
General Failure Analysis Table……………………………………….35
Routine maintenance……..……………………………………….…38
Specification……………………………………………………………39
AppendixⅠ………………………………………………………..……40
3
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being from being walked on or
pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a used,
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip over.
14. Refer all servicing to qualified service personnel. Servicing is
4
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or been dropped.
5
CAUTION
To prevent damage which may result in fire or electric shock hazard,
do not expose this appliance to rain or moisture.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference that may cause undesired
operation.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Introduction
Function Description
High Speed Dome Camera is an all-in-one high-tech monitoring
product, which integrates high-definition color video camera,
universal gear change pan-tilt and multi-function decoder, CPU
processor. This product furthest reduces the processes of connection
an installation between system reliability. Also the video camera is
very easy to install and maintain, has many features, such as perfect
shape, legerity and convenience, simple operation and etc.
1. Integrate multi-function decoder
Built-in decoder consists of multi-protocol and communications
protocol. Communication serial baud rate is adjustable. Using the
simple finger-switch inside the Dome device, the products can be
compatible with kinds of systems and has very high commonality.。
2. Integrate full-view rotary station
6
Horizontal 360°unlimited continuous rotation and rotation rate can be
adjusted from 0.1 ~240°per second continuously（Manual speed）.
Vertical rotation range is 0~90°and rotation rate can
achieve0.1~90°/s.
3：Intelligent power-off memory operation
a. Design ideally ,Auto-flip to follow object。
b. Provides 128 preset points.
c. Provide setting of scanning track and select scanning track
function.
d. Four groups of scanning tracks: Every group of scanning track can
set Max. 16 preset positions. If camera self support OSD menu
function. It can open completely when using.
e. Integrate multiple camera protocol. Support Max.5 different Brands
cameras.
f. Integrate multiple protocols: Max. 20 kinds of communication
protocol. Transmission rate Selectable from 1200bps to 38400bps
g. Self-test can allow to store track that user edits arbitrarily and
information power-off memory.
h. RS485 serial control, address of Dome device is from 1~255.
i. Built-in surge and lightning strike protective equipment.
7
DRAWING
8
CONNECTIONS
Precautions
• The following connections should be made by qualified service personnel
or system installers in accordance with all local codes.
1、Before installing please read the instructions, of the unknown, please
contact seller.
2、Connections (Figure)
Green RS485+ RS485 data
Yellow RS485-
Yellow & Green (Earth lead)
Blue AC Power
Brown AC Power
BNC Video output
Note: When powered up, the dome device performs a self-check (including one
panning, tilting, zooming and focusing operation).
If control wire of RS485 connects by the connective box, it can connect
as RS485A+ with blue wire, RS485B- with yellow wire.
9
Installation
1. On shield of protection, is trying to gain and installation to avoid scratches
spherical transparent and clean.
2. Choose the appropriate installation method. Speed dome camera must be
installed at the scaffold on a stable and reliable, the installation should be in
accordance with the requirements of surveillance scenes to make the largest screen
monitor, and monitor the clearest images.
3. Choose the best installation location, if possible to be able to minimize sun,
rain, avoid dust. Speed dome camera must be the work of the warming, we should
try to avoid the scorching sun exposure, and bear in mind indoor speed dome
camera can not be used outdoors.
4. Power supply should be selected with high-speed dome camera matching
power to ensure the normal operation of the speed dome camera and long-term
stability. Line voltage power supply to consider wear and tear, a sufficient number of
current job
5. Auxiliary equipment. As the project was also asked to consider applications
environmental conditions, such as at night to clear the recorded image, then on the
need to increase the environmental illumination.
6. Avoid interference. Communications and video signal cables have to be
asked to avoid electromagnetic interference, such as power transformers,
high-power electric motors or generators, high voltage generator, pulse generator
and other facilities, and these two signal lines have to wear steel pipe laying, and
strong Level voltage electric lines, with the regulatory requirements to maintain
spacing.
10
ID CODE SETTING
The ID code setting set by 8 digital-switch, address of speed dome
camera is from 1~255, about the Stir code of addresses 1~128, pls see
the Appendix Ⅰ.
There are the parts of Stir code of addresses .Setting as below picture
(Other, please turn on and so forth in accordance with the binary)：
Note: Black pane is the position of the key .Please power- off
before setting.
Inhaltsverzeichnis
Andere Tiandy Sicherheitskamera Handbücher
Tiandy
Tiandy TC-D5622H-R80 Bedienungsanleitung
Tiandy
Tiandy TY-CG6E-30WSL Bedienungsanleitung
Tiandy
Tiandy TC-NC SERIES Installationsanleitung
Tiandy
Tiandy S6 Bedienungsanleitung
Tiandy
Tiandy S3E 1.3M Series Bedienungsanleitung
Tiandy
Tiandy IP Speed Dome Camera Bedienungsanleitung
Tiandy
Tiandy 1.3MP Mini Bullet Bedienungsanleitung
