Tiandy TY-CG6E-30WSL Bedienungsanleitung
Keep an Eye on What Matters
Smart WiFi Battery Camera
User Manual
Contents
1. Packing List
2. Product Appearance
3. Quick Start
4. Add Camera by QR code Scanning
5. Add Camera by Hotspot
6. Install the Camera
7. Share the Camera
8. Play the Camera
9. Setup your Home and Rooms
10. Camera's Specification
11.Solar Panel's Specification
12. Firmware Upgrade
13. Contact Us
01
01
04
06
08
10
12
13
15
16
16
16
17
Packing List
Camera
Bracket for Camera
Screws Bag
User Manual
Solar Panel
Bracket for Solar Panel
USB Charging Cable
1
X
1
X
1
X
1
X
1
X
1
X
1
X
Product Appearance
Lens
White Light
Status Indicator
Human Body
Infrared Sensor
Microphone
Camera
01
Bracket Interface
Speaker
Power Button
Reset Button
Type-C Port
Micro-SD
Card Slot
02
Bracket
Power Cable
(Type-C Port)
Solar Panel ( 1.6W )
Solar Panel
03
Quick Start
1. Download and install the App
Android
Download
Download
App Store
The wireless smart battery camera supports Android and iOS
devices using the mobile App: Tinosec. For your best experience,
please scan the QR code below with your mobile phone, install
the App, and follow the instruction to complete the user
registration.
The wireless smart battery camera operates on the built-in
internal batteries and can also be powered using AC-Power
supply.
04
Sign in to the App, tap on the " " symbol on the upper right hand
corner and follow the prompts displayed on screen (please bring
the camera and device close to the router when initially configuring).
2. Add camera
05
Add Camera by QR code Scanning
Step 1) After pressing the camera power button for 3 seconds, the
camera will turn on. The camera will emit the scanning sound
"Ding Dong Ding Dong" after it is turned on for seconds ( if you do
not hear it, please quickly press the power button twice).
Step 2) Then select the "Smart Camera (Wi-Fi)", just follow the
pages, tap "Next", no need to read the words in pictures. Until the
4th steps, tick "Got it", then tap "Next".
Step 3) Please do connect your phone to a 2.4GHz network, then
tap "Next". Take the camera to scan the QR code. Hold still and
keep them 15~20cm away from each other. After it succeeded
scanned, you will hear a sharp sound "ding ding ding". Keep the
device on, and then it will be starting registered on the server. You
will hear "Connection Succeeded" to confirm the success.
Power Button
06
Step 1 Step 2 Step 3
Step 4 Step 5 Step 6
If you failed to add camera by scanning QR code, you can try "Add
Camera by Hotspot" following next pages.
07
Add Camera by Hotspot
After pressing the camera switch for 3 seconds, the camera turns
on. The camera will emit the scanning sound "Ding Dong Ding
Dong" after it is on ( If you do not hear it, please quickly press the
power button twice).
Keep the camera powered on, then follow steps below to add the
camera to Wi-Fi by Hotspot.
1. Select Smart Camera (Wi-Fi).
2. On the Right corner, choose AP Mode.
3. Reset the camera by pressing reset button.
4. Choose a 2.4GHz Wi-Fi network and input password.
5. Go to connect to choose the camera's AP, which named
SmartLife-XXXX. Then go back to the App to continue.
Step 1 Step 2 Step 3
08
Inhaltsverzeichnis
Andere Tiandy Sicherheitskamera Handbücher
Tiandy
Tiandy IP Speed Dome Camera Bedienungsanleitung
Tiandy
Tiandy S6 Bedienungsanleitung
Tiandy
Tiandy TC-D2410-AW Bedienungsanleitung
Tiandy
Tiandy TC-NC SERIES Installationsanleitung
Tiandy
Tiandy TC-D5622H-R80 Bedienungsanleitung
Tiandy
Tiandy S3E 1.3M Series Bedienungsanleitung
Tiandy
Tiandy 1.3MP Mini Bullet Bedienungsanleitung
