Timberlab Piatto Bedienungsanleitung

www.timberlab.eu

Manual Piatto

21-03-2022

Timberlab B.V.

Harskamperweg 32

6731 AB Otterlo

Follow this installation guide for a safe installation.

General

- Follow this installation guide for a safe installation.

- Installation and connection of the lighting armature should be done by a certiﬁed installer

– Disable main supply before starting installation activities!

- Timberlab is not responsible for adjustments of modiﬁcations on the armature

- The armature is not dimmable!

- The earthing will be (is) connected to the RVS lid

- We do not recommend the use of concrete mortar for ﬁlling in the area around the column. If

necessary/deriable, depending on the type of soil a stabilising sand can be applied.

Maintenance advice

The wood does not require any maintenance. In the course of time, the wood will grey in a natural way.

If a treatment is chosen, a moisture regulating surface treatment should always be applied. Ask your

supplier for advice! If desired, the LED module can be cleanded with a soft brush.

Warranty

The product comes with a two-year guarantee. Wood is a natural product. This wood is, unless expressly

stated otherwise, fresh, undried, sawn and/or planed (if applicable). No furhter woodworking was

performed. There is always a chance of warping and/or (dry) cracking of the wood. This may occur upon

delivery or later. This is not a production error but a natural characteristic of the wood. Warranties do not

apply for this.

The product code is generated by selecting the options and taking the number in brackets ().

Product

Wood species

Certiﬁcation

In ground/

post holder

Colour

temperature

Version

Voltage

Variations

KVAC

Piatto (22) Chestnut (2) N/A (0) L1+650mm (00) 2.200K (5) 32mm hole (0)

without PIR (0) 230V (1) N/A (00)

Piatto-solar (23) PEFC (2) 2.700 (1) with cable (1)

with PIR (1)

12V-24V

AC/DC socket (02)

4.000 (3) without PIR with

anti-theft (2)

amber (4) with PIR with

anti-theft (3)

21-03-2022

Ø20 cm

4. Connect

Ø20 cm

4. Connect

Piatto excl cable

1. Drilling

Drill or dig holes in the ground.

2. Place

Place the Piatto in the hole.

3. Digging

-Dig out to 40cm deep.

Make sure there is no voltage on

the ground cables

- Place the ground cables.

- Feed the cables through the

Piatto.

5. Finishing

- Straighten the pole with

the help of a spirit level.

- Close the hole

in the ground.

Piatto incl cable

3. Digging

-Dig out to 40cm deep.

Make sure there is no voltage

on the ground cables

-Place the ground cables

2. Place

Place the Piatto in the hole.

1. Drilling

Drill or dig holes in the ground.

5. Finishing

-Straighten the pole with

the help of a spirit level.

-Close the hole

in the ground.

Connect

with an IP68

Castjoint

ground cable

Stainless steel cap

Driver

ground cable

21-03-2022

Ø20 cm

Piatto-solar

1. Drilling

Drill or dig holes in the ground.

2. Place

Place the Eye in the hole.

3. Finishing

- Straighten the pole with the help

of a spirit level.

- Close the hole in the ground.

4.Usage

Pull the plastic key from the stainless steel cover.

Break the break-o cap of the key and put it back

into the opening of the of the stainless steel cover.

Dieses Handbuch passt für folgende Modelle

Andere Timberlab Außenleuchte Handbücher

Timberlab

Timberlab Strato Bedienungsanleitung

Timberlab

Timberlab EYE Bedienungsanleitung

Timberlab

Timberlab Torre 100 Bedienungsanleitung

Timberlab

Timberlab Manual Peri 100 Bedienungsanleitung

Timberlab

Timberlab Basso 30 Bedienungsanleitung

Timberlab

Timberlab Alto 43 Bedienungsanleitung

Timberlab

Timberlab Pila Bedienungsanleitung

Timberlab

Timberlab Guarda Bedienungsanleitung

Timberlab

Timberlab Punto Bedienungsanleitung

Timberlab

Timberlab Bosco Bedienungsanleitung

Timberlab

Timberlab Futuro Wallbox 78 Bedienungsanleitung

Timberlab

Timberlab Faro Bedienungsanleitung

Timberlab

Timberlab Futuro Homebox 79 Bedienungsanleitung

Timberlab

Timberlab Sotto Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung