TJERNLUND 1 Bedienungsanleitung

HSUL-J, HS115-J & HST-J POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3000

Watts 95

Amps 1.26

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Shaded Pole Yes

Open Yes

Int. Fan Cooled Yes

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-J only)

24/115V Switching Relay

Timer Relay (Model HST-J only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustment

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-J (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-J (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-J (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW- -END VIEW- -PLAN VIEW-

P/N 8506001

REV. 1 11/94

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

HSUL-1, HS115-1 & HST-1 POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3000

Watts 166

Amps 1.51

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Shaded Pole Yes

Open Yes

Int. Fan Cooled Yes

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-1 only)

24/115V Switching Relay

Timer Relay (Model HST-1 only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustment

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-1 (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-1 (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-1 (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW- -END VIEW- -PLAN VIEW-

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

HSUL-2, HS115-2 & HST-2 POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3300

Watts 166

Amps 1.51

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Perm. Split Cap Yes

Open Yes

Int. Fan Cooled No

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-1 only)

24/115V Switching Relay

Timer Relay (Model HST-1 only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustable

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-2 (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-2 (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-2 (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW-

-END VIEW- -PLAN VIEW-

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

Andere Handbücher für 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TJERNLUND Lüfter Handbücher

TJERNLUND

TJERNLUND SS2 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.02) 8504105 REV... Bedienungsanleitung

TJERNLUND

TJERNLUND CS1 Bedienungsanleitung

TJERNLUND

TJERNLUND SS2 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.04) 8504105 REV B... Bedienungsanleitung

TJERNLUND

TJERNLUND V1, V1D, V2D CRAWL SPACE VENTILATORS 8500720 Bedienungsanleitung

TJERNLUND

TJERNLUND AIRESHARE AS2 Bedienungsanleitung

TJERNLUND

TJERNLUND AD-1 DRAFT INDUCER FOR WOOD BURNING STOVES 8500672 REV. 1... Bedienungsanleitung

TJERNLUND

TJERNLUND 1 Bedienungsanleitung

TJERNLUND

TJERNLUND SS1 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.02) 8504102 REV... Bedienungsanleitung

TJERNLUND

TJERNLUND DRAFT INDUCER DJ-3 Bedienungsanleitung

TJERNLUND

TJERNLUND SS1 SIDESHOT (DISCONTINUED VERSION-PRE UC1 UNIVERSAL CONTROL) 8504041 REV A... Bedienungsanleitung

TJERNLUND

TJERNLUND HS-3C CANADIAN 8504002 REV 2 0997 Bedienungsanleitung

TJERNLUND

TJERNLUND HS-5 Bedienungsanleitung

TJERNLUND

TJERNLUND AIRESHARE AS1 Bedienungsanleitung

TJERNLUND

TJERNLUND Duct Booster RB10 Bedienungsanleitung

TJERNLUND

TJERNLUND 950-8302 T-STAT KIT 8504132 Bedienungsanleitung

TJERNLUND

TJERNLUND SS1C SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.02) 8504103 REV... Bedienungsanleitung

TJERNLUND

TJERNLUND DUCT BOOSTER IN-LINE DUCT FANS 8500380 REV. A... Bedienungsanleitung

TJERNLUND

TJERNLUND GPAK-J Bedienungsanleitung

TJERNLUND

TJERNLUND DB2 DUCT BOOSTER Bedienungsanleitung

TJERNLUND

TJERNLUND 950-1007 FAN PROVER KIT 8504113 Bedienungsanleitung

TJERNLUND

TJERNLUND EA5 DUCT BOOSTER FAN 8504029 Bedienungsanleitung

TJERNLUND

TJERNLUND WHKI MILLIVOLT APPLIANCE INTERLOCK (RECOMMEND WHKE FOR USE WITH UC1) 8504055 REV 3... Bedienungsanleitung

TJERNLUND

TJERNLUND UC1 Bedienungsanleitung

TJERNLUND

TJERNLUND HSJ Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung