
TROUBLESHOOTING
TENSIOMYOGRAPHY
ADDITIONAL RESOURCES AND SUPPORT
TENSIOMYOGRAPHY
In case the message »Time out error« appears, change »Put the computer to sleep« to »Never« under
Edit Plan Settings (Control Panel / Hardware and Sound / Power Options/ Edit PlanSettings) - Fig. 1.
Furthermore change »When I close the lid« to »Do nothing« both in battery and plugged - in
mode, under Edit Plan Settings (Control Panel / Hardware and Sound / Power Options / System
Settings) - Fig. 2
Fig. 1Fig. 2
In casethe message»No Response From Device« appears, make sure the stimulator
is connected and turned on. Check if the COM port is set in the settings menu.
If the port reads test, press scan to set actual port.