MENUGUIDE
I. Channel Manager
I-2.Rename
1. Using◀ ▶go to the Rename mode.
2. Select the channel that you want to rename using ▲▼
and then press OK.
3. Keypad Dialogdisplaysonthe screen.
4. Edit the name entering NUMBERSand / or WORDSinthe
Keypad Dialog.
5. Press YELLOW buttonto rename Favorite 1~8 and press
BLUE buttonto rename Satellite.
6. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
I-3.Move
1. Using◀ ▶go to the Move mode.
2. Select channels whichyou want to move by pressing OK key.
3. Move cursor that you want to place onthan press GREEN
button.
4. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
I-4.Lock
1. Using◀ ▶go to the Lock mode.
2. Select the channel that you want to lock and then press
OK. will be marked at the end ofthe selected chan-
nel name bar. To delete press OK again.
3. Press EXIT to go to Main Page or press MENU to go to
the current live channel.
I-5.Delete
1. Using◀ ▶go to the Delete mode.
2. Select the channel that you want to delete and then
press OK. will be marked onthe selected channel
number. To delete press Blue buttonagain.
3. Press YELLOW buttonto delete TP. Select one channel
and press Blue button. All channelsofthat TP will be
automatically selected.
4. Press YELLOW buttonto delete Satellite. Select one chan-
nel and press Blue button. All channelsofthat the
Satellite will be automatically selected.
5. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
6. Message Box displaysonthe screen.
7. Select OK onthe Message Box and then press OK to
delete the marked channels.
MENUGUIDE
II. Installation
II. INSTALLATION
This section mayhelp you to set up antenna and
scan satellite or transponder,etc. Select Installations
in Main Page using ▲▼ and press OK.
Press EXIT to return to the previousmenu or press
MENU to go to the current live channel.
II-1 Channel Search
II-2.DiSEqC Switch
II-3.Motor Setup
II-4.Factory Default
II-1 Channel Search
1. You can move the cursor using ▲▼ and press OK
when you select the value that you want.
a) Satellite
- Press OK to display the Satellite List Box.
- Select the proper Satellite and then press OK.
b) DiSEqC
- Press OK to display the DiSEqC Port List.
- Select the proper DiSEqCport and then press OK.
c) Frequency
- Press OK to display the Frequency List.
- Select the proper Frequency and then press OK.
d) LNB
- Press OK to display the LNB Frequency List.
- Select the proper LNB Frequency and then press OK.
- Youcanalso input directly the numbers using NUMBER
KEY onthe RCU.
e) 22KHz Tone
- Select the one among None, 0 KHz or 22 KHz depending
on the user’santenna switchbox.
f) Search Option
- Press OK to display the Search Optionlist.
- Select the Search Optionthat you want and then press OK.
g) Search
- Press Searchto start scanchannels.
- Selected Satellite displaysonthe screen.
- Press ▶to select more Satellite or ◀to cancel the selected Satellites.
- Press OK to start scanning.
(2012 10 24) manual_TOCOMSAT duo LITE.indd 12-13 2012-10-24 �� 7:45:00
