TomTom VIA 1435T Bedienungsanleitung

TomTom Via

What’s in the box1.

What’s

in the

box • TomTom Via including the Easy Click mount

•USBcable

• USB car charger or RDS-TMC Traffic Receiver, depending on your product

To check what is included in your product, see the list of box contents on the product

packaging.

• Installation poster

Read me first2.

Read

me first Mounting your device in your car

Make sure that both the mount and your windscreen are clean and dry before you attach

the mount. Place the device so that it does not interfere with your view of the road or of

any of the controls in your car.

To attach the mount, press the suction cup firmly against the windscreen on an area where

the glass is flat. Then twist the grip on the base of the mount in a clockwise direction until

you hear a click.

Plug the cable into your car dashboard and connect the other end to the connector on the

back of your device.

Switching on and off

To switch on your navigation device, press and hold the On/Off button until you see the

start-up screen. The first time you switch on your device, it may take a short time to start.

Setting up

Important: Take care to select the correct language, since the language you choose will

be used for all text on the screen.

When you first switch on your device, you have to answer a few questions to set up the

device. Answer the questions by tapping the screen.

GPS reception

When you first start your TomTom Via navigation device, the device may need a few min-

utes to determine your GPS position and show your current position on the map. In future,

your position will be found much faster, usually within a few seconds.

To ensure good GPS reception, you should use your device outdoors. Large objects such

as tall buildings can sometimes interfere with reception.

About MyTomTom

MyTomTom helps you manage the contents and services of your TomTom Via navigation

device, as well as giving you access to the TomTom community. You log in to MyTomTom

on the TomTom website. It is a good idea to frequently connect your navigation device to

MyTomTom, to ensure you always have the latest updates.

Tip: We recommend using a broadband internet connection whenever you connect your

navigation device to MyTomTom.

Setting up MyTomTom

To set up MyTomTom, do the following:

1. Connect your computer to the internet.

2. Start a browser and go to tomtom.com/getstarted.

3. Click Download now.

Your browser downloads the MyTomTom support application, which you need to

install on your computer in order to connect your device to MyTomTom. Follow the

instructions on the screen if you are asked questions while downloading.

4. When prompted, connect your device to your computer using the USB cable. Then

switch your device on.

Your device is then recognised, backed up and the latest updates are installed.

Important: You should plug the USB connector directly into a USB port on your computer

and not into a USB hub or USB port on a keyboard or monitor.

Once the MyTomTom support application is installed, you can access MyTomTom from

the notification area on your desktop.

Tip: When you connect your navigation device to your computer, MyTomTom tells you if

there are any updates for your device.

Device not starting

In rare cases, your TomTom Via navigation device may not start correctly or may stop

responding to your taps.

First, check that the battery is properly charged. To charge the battery, connect your

device to the car charger. It can take up to 2 hours to fully charge the battery.

If this does not solve the problem, you can reset the device. To do this, press and hold the

On/Off button for 15 seconds and release the button when your device begins to restart.

Charging your device

The battery in your TomTom Via navigation device charges when you connect it to the car

charger or to your computer.

Important: You should plug the USB connector directly into a USB port on your computer

and not into a USB hub or USB port on a keyboard or monitor.

Take care of your navigation device

Never leave your TomTom Via or accessories on view when you leave the car as they may

become an easy target for thieves.

It is important to take care of your device:

• Your device is not designed for use in extreme temperatures and any such exposure

may cause permanent damage. Extended exposure to sun light may lead to early dete-

rioration in battery performance.

• Do not open the casing of your device under any circumstances. Doing so may be dan-

gerous and will invalidate the warranty.

• Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.

Safety3.

Safety Installing the mount

Consider carefully where to attach the mount in your car. The mount should not block or

interfere with any of the following:

• Your view of the road

• Any of the controls in your car

• Any of your mirrors

• The airbag

When your navigation device is in the mount, you should be able to reach the device easily

without leaning or stretching. You can attach the mount to the windscreen, side window

or use a Dashboard Mount Disk to attach the mount to your dashboard. The following dia-

grams show where you can safely attach the mount.

TomTom also offers alternative mounting solutions for your TomTom navigation device.

For more information about Dashboard Mount Disks and alternative mounting solutions,

go to tomtom.com/accessories.

Safety settings

We recommend using the safety settings to make your driving as safe as pos-

sible.

These are some of the options included in the safety settings:

• Show essential menu buttons while driving

• Show safety reminders

• Warn when driving faster than allowed

You can also drive more safely by using voice commands to control your TomTom Via.

Planning a route4.

Plan-

ning a

route Important: In the interest of safety and to reduce distractions while you are driving, you

should always plan a route before you start driving.

To plan a route on your TomTom Via, do the following:

1. Tap the screen to open the Main menu.

2. Tap Navigate to...

3. Tap Address.

Tip: The first time you plan a route, you are asked to select a country, state or region. Your

selection is saved and used for all future routes until you change this setting.

You can change this setting by tapping the flag before you select a city.

4. Enter the town or city name.

Tip: Instead of typing the address, tap the microphone button to enter the address by

speaking to your Via.

• Towns with similar names are shown in the list while you type.

• When the correct city or town appears in the list, tap the name to select the destina-

tion.

5. Enter the streetname.

• Streets with similar names are shown in the list while you type.

• When the correct streetname appears in the list, tap the name to select the destina-

tion.

6. Enter the house number, then tap Done.

7. The location is shown on the map. Tap Select to continue or tap Back to enter another

address.

Tip: If you want your final destination to be a car park, tap Park nearby and select a loca-

tion from the list of car parks close to your general destination.

8. Select the type of route you want to plan.

9. When the new route is shown, tap Done.

• For more information about the route, tap Details.

• To plan a different route, tap Change route.

Your TomTom Via starts to guide you to your destination, using spoken instructions and

onscreen directions.

Route summary

The route summary shows an overview of your route, the remaining distance to your des-

tination and the remaining estimated journey time.

To view the route summary, tap the right-hand panel on the status bar in the Driving view

or tap View route in the Main menu and then tap Show route summary.

When used with TomTom Traffic, the route summary shows an overview of your route,

the remaining distance to your destination, the remaining estimated journey time and traf-

fic information about delays on your route.

The route summary screen shows an overview of your route, the remaining distance to

your destination, the remaining estimated journey time, and expected delays on your

route using IQ Routes information about actual speeds on roads.

Using your voice to plan a route

Instead of tapping the screen to plan a route, you can use your voice to plan a route.

For information about planning a route using your voice, see Voice command and control.

Frequent destinations

If you often make trips to the same destinations, you can set your TomTom Via to ask if

you want to plan a route to one of these locations, every time the device starts. This is

faster than planning a route in the normal way.

To select a new destination, tap Start-up settings in the Settings menu and select Ask for

a destination. Then select a button to use for this destination and answer the questions

about the destination.

Show my frequent destinations

You can set your TomTom Via to ask if you want to plan a route to one of your frequently

visited destinations every time the device starts.

To change this setting, do the following:

1. Tap Start-up settings in the Settings menu and then select Ask for a destination.

2. Tap Yes, then tap Yes again to begin entering information about the destination.

3. Select a symbol for the destination and tap Done to set the symbol, then tap Yes.

Tip: To add new destinations, select one of the numbered symbols and enter a name for

the new destination button.

4. Tap Yes and if required enter a new name, then tap Done.

5. Enter the address details in the same way you enter an address when planning a route,

then tap Done.

6. If you want to set more destinations, repeat the steps above. Otherwise, tap Done.

You are asked if you want to change the start-up image.

7. If you want to change the image, tap Yes then follow the instructions shown on the

screen. Otherwise, tap No.

Every time your TomTom Via starts, you are asked if you want to plan a route. If you tap

Cancel, you are shown the Main Menu.

Using arrival times

When you plan a route, your TomTom Via asks you if you need to arrive at a particular

time.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TomTom GPS Handbücher

TomTom

TomTom Traffic Receiver Bedienungsanleitung

TomTom

TomTom ONE Bedienungsanleitung

TomTom

TomTom car kit for iPhone Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom RIDER Bedienungsanleitung

TomTom

TomTom One XL Bedienungsanleitung

TomTom

TomTom GO 500 Bedienungsanleitung

TomTom

TomTom Eclipse AVN2210p Bedienungsanleitung

TomTom

TomTom ECLIPSE Bedienungsanleitung

TomTom

TomTom GO 500 Bedienungsanleitung

TomTom

TomTom One XL Bedienungsanleitung

TomTom

TomTom GO 950 Bedienungsanleitung

TomTom

TomTom GO 720 - Automotive GPS Receiver Bedienungsanleitung

TomTom

TomTom Eclipse AVN2210p Bedienungsanleitung

TomTom

TomTom 1N01.081 Bedienungsanleitung

TomTom

TomTom Car Navigation System ONE Bedienungsanleitung

TomTom

TomTom HP edition Bedienungsanleitung

TomTom

TomTom Ease Bedienungsanleitung

TomTom

TomTom GO 6200 Bedienungsanleitung

TomTom

TomTom LINK 3000 Bedienungsanleitung

TomTom

TomTom MyTomTom Bedienungsanleitung

TomTom

TomTom NAVIGATOR 5 Bedienungsanleitung

TomTom

TomTom Connect Bedienungsanleitung

TomTom

TomTom VIA Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung