TOORX BRX 300 Bedienungsanleitung

Ed : Rev : Cod :

INSTRUCTION

02/20 GRLDTOORXBRX300E00

iConsole App Manual

www.toorx.it/iconsole

Pre-assembly Notes

Open the boxes:

Make sure to inventory all the parts that are included in the box. Check the hardware chart

of a full count of the number of parts included for proper assembly . If any of the parts are

missing, contact with the dealer.

GATHER YOUR TOOLS

Before starting the assembly of your unit，gather the necessary tools.Having all of the

equipment at hand will save time and make the assembly quick and hassle-free.

NO.

NAME

SPECIFICATION

QUANTITTY

Allen C.K.S. half thread screw

M10×60×25

Spring washer

Φ10

Curved washer

Φ10.5×R100×t2.0

Philips pan head full thread screw

M4×6

Hex locking nut

M10

Flat washer

Φ10

Allen C.K.S. half thread screw

M10×20

Allen C.K.S. half thread screw

M10×55×20

Philips pan head full thread screw

M4×16

CLEAR YOUR WORK AREA

Make sure that you have cleared away a large enough space to properly assemble the

unit.Make sure the space is free from anything that may cause injury during

assembly.After the unit is fully assembled,make sure there is a comfortable amount of

free area around the unit for unobstructed operation.

NOTE: Each step number in the assembly instructions tells you what you will be doing.

Read and understand all instructions thoroughly before assembling the treadmill.

NAME

SPECIALIZED

QUANTITY

L-shaped wrench

5×80×80S(with a cross)

L-shaped wrench

6×40×120

Open-end wrench

t4.0×32×110

Product instruction

Technical information

*WE RESERVE THE RIGHT TO AMEND THE PRODUCT WITHOUT PRIOR NOTICE.

DIMENSION

Unfold：1090x560x1490mm

SPEED RATIO

UP&DOWN

9 levels, 270mm distance

FRONT&BACK

70mm distance

Motor belt

Console

Handle bar

Bottle

Bolt

Seat

Pedal

Front stabilizer

Back stabilizer

Step 1: Attach the front stabilizer (2) to the main frame (1) with curved washer(28), spring

washer(27) and Allen C.K.S. half thread screw(26).

Step 2: Attach the rear stabilizer (3) to the main frame (1) with curved washer(28), spring

washer(27) and Allen C.K.S. half thread screw(26).

Step 3:

Loosen the knob and attach saddle post(4)to the main frame. Then tighten the knob.

ASSEMBLY INSTRUCTIONS

Step 4:

1.Attach saddles(5) to the saddle post(4) with casing(25) and handle knobs(23), do not

tighten them.

2.Translate saddles(5) to proper position. Then attach saddle decoration cover (L)(16)

and saddle decoration cover (R)(17) to saddle post(4) with Philips C.K.S. pan head full

thread screw(29).

3.Tighten the handle knobs(23).

Step 5:

1.Attach the Upright post trim strip (46) to the Upper upright post (6). Take the Upright post

cover (13) from main frame (1). Then attach to the upper upright post (6).

2.Connect motor communication wire (10) and console communication wire (9).

3.Attach the upright post (6) to the main frame(1) with flat washer(34),spring

washer(27),Allen C.K.S. full thread screw(35), curved washer(28),spring

washer(27),Allen C.K.S. half thread screw(35), Allen C.K.S. half thread screw(36) ,curved

washer(28) and Hex locking nut.(33)

4. Attach upright post cover(13) and Upright post trim strip (46) to the main frame (1).

Tip: After connecting the communication line, it is necessary to plug the communication

wire into the upright post to avoid clipping the wire. Make sure that all screws are in the

hexagonal hole.

Step 6:

Attach handlebar connection wire(11) to the upright post(6). Attach handlebar(7) to the

upper upright post(6). Close handle clamp ring(22) and lock them with T-shaped rotary

knob(21).

34 27 35

Step 7:

1.Connect communication wire(9) and back hole of the console. Connect handle pulse

connection wire (11) and console outlet (12).

2.Attach console(8) to upper upright post (6) with Philips C.K.S. full thread screw(24).

3.Through handle bar cover left (14) and handle bar cover right (15 ) out of the

handlebar(7). Then attach them to upper upright post (6) with Philips pan head full thread

screw(37).

24 8

Step 8: Attach and lock left pedal(18) and right pedal(19) to the main frame(1).

Step 9:

Attach bottle holder(20) to upper upright post(6) with Philips pan head full thread

screw(37).

Workout tips:

1,User need to put the feet completely inside the pedal,and to adjust the resistance of

magnet control according to user.

2,Since the machine with double flywheels and it will have huge moment of inertia, when

the user stop before high speed, the user should minimize the resistance and lower the

speed, to avoid hurt the user’s leg by the moment of inertia of left and right pedal

3,The machine should be put on flat floor and have enough space for workout

Exploded Drawing for assembly

Andere Handbücher für BRX 300

Inhaltsverzeichnis

Andere TOORX Heimtrainer Handbücher

TOORX

TOORX SRX75 Bedienungsanleitung

TOORX

TOORX BRX-R3000 Bedienungsanleitung

TOORX

TOORX BRX EASY Bedienungsanleitung

TOORX

TOORX BRX Compact MultiFit Bedienungsanleitung

TOORX

TOORX SRX40S Bedienungsanleitung

TOORX

TOORX BRX35 Bedienungsanleitung

TOORX

TOORX BRX85 Bedienungsanleitung

TOORX

TOORX BRX50 Bedienungsanleitung

TOORX

TOORX BRX60 Bedienungsanleitung

TOORX

TOORX BRX COMFORT Bedienungsanleitung

TOORX

TOORX SRX-70S Bedienungsanleitung

TOORX

TOORX BRX45 Bedienungsanleitung

TOORX

TOORX BRX 100 Bedienungsanleitung

TOORX

TOORX BRXR 90 Bedienungsanleitung

TOORX

TOORX BRX AIR300 Bedienungsanleitung

TOORX

TOORX BRX90 Bedienungsanleitung

TOORX

TOORX BRX95 Bedienungsanleitung

TOORX

TOORX ERX 65 Bedienungsanleitung

TOORX

TOORX SRX60 EVO Bedienungsanleitung

TOORX

TOORX BRXR COMFORT Bedienungsanleitung

TOORX

TOORX SRX700 Bedienungsanleitung

TOORX

TOORX SRX300 Bedienungsanleitung

TOORX

TOORX BRX 300 Bedienungsanleitung

TOORX

TOORX BRX FLEXI Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung

KIDSFIT

KIDSFIT Cardio Kids 661 Bedienungsanleitung