TOORX TRX POWER COMPACT Bedienungsanleitung

Ed : 03/17 Rev : 00

INSTRUCTION

How to assemble?

STEP 1:

Take the machine and tool set

from the carton and put them

on flat ground.

PARTS LIST: FIG 1

1.Wrench

1PC

2.Silicon oil

1PC

STEP 2:

Hold the MIDDLE part of the

foldable bar with one

hand,and pull it upward as

FIG 2.

Meanwhile,hold the upright

tube with the other hand and

pull it upward as the

arrowhead direction.

FIG 2

STEP 3:

Uplift the handle bars with

both hands.It will be ok when

the sound “Kaka”is

heard.Then turn the switch

button in clockwise direction

and lift up the console in the

correct position.After

finishing,tighten the switch

button.

Assembly is finished.

Note: For advoiding from

injury,please pay attention to

the joint parts.

Upright tube

Foldable bar

Switch button

Handle bar

FIG 1

FIG 3

Product Intro

Structure

Parameter

Voltage

AC-220~240V 50~60Hz

Max load

130kg/290lbs

Size

Foldable: L1775*W800*H360mm

Assembly:

L1775*W800*H1385mm

Running area

1350*450mm

Max power

3.5HP

Incline

0~15%

Speed

1.0－18.0Km/h

FIG 4

Handle cover

Running belt

Cushion pad

Main frame

Incline weldment

Upright tube

Console

Odds and ends rack

Safety switch

Rear cover

Handle bar

Handle pulse sensor

Side rail

Motor cover

Foldable bar

Supporting wheel

Cylinder

Exploded drawing

14 13

45 46

122

124

92 92 92

96 96

100

101

102

103

104

105

103

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120 65

121

122

123

124

FIG 5

Itemized list

S/N Name Qty S/N Name Qty S/N Name Qty S/N Name Qty S/N Name Qty

1 Incline bracket 1 26 Incline motor 1 51 Right decoration part 1 76 Hexscrew M10*45 1 101 Lock nut M8 2

2 Main frame 1 27 Upper console cover 1 52 Plastic cover 2 77 Hexscrew M8*50 2 102 Lock nut M6 2

3 upright tube 1 28 Under console cover 1 53 Cylinder 2 78 Hexscrew M8*15 2 103 Flat washer Φ10 8

4 Left handle bar 1 29 Left cross tube 1 54 Below Wire 2 79 Hexscrew M8*65 2 104 Flat washer Φ8 12

5 Right handle bar 1 30 Middle cross tube 1 55 Upper Wire 2 80 Hexscrew M8*45 1 105 Flat washer Φ6 6

6 Console bracket 1 31 Right cross tube 1 56 Controller 1 81 HexscrewM8*30 2 106 Flat washer Φ4 6

7 console tube 1 32 Cross bar board 1 57 Transformer 1 82 Hexscrew M8*25 4 107 Lock washers for external teeth Φ4 1

8 foldable bar 1 33 Left console spindle cover 1 58 switch 1 83 Hexscrew M8*20 8 108 Plastic sheet for wire fix 2

9 Left grounding tube 1 34 Right console spindle cover 1 59 Restoration switch 1 84 Hexscrew M8*15 2 109 Line nip 1

10 Right grounding tube 1 35 Handle pulse 2 60 Power cable 1 85 Hexscrew M6*15 4 110 Filter 1

11 Cross tube 1 36 Handle cover 2 61 Plug 1 86 Hexagonal screw M8*50 2 111 Inductor 1

12 U grip ring 2 37 Left foldable bar cover 2 62 Switch button 1 87 Cross screw M6*20 2 112 Magnet ring 2

13 Lock 2 38 Right foldable bar cover 2 63 Wheel 2 88 Cross screw M6*15 8 113 Cross screw ST4*20 2

14 Wire line hitch 2 39 Left urpright tube cover 2 64 Wheel base 2 89 Cross screw M5*15 4 114 Console wire 1 1

15 Wire connector 2 40 Right urpright tube cover 2 65 Small cushion pad 4 90 Cross screw M5*10 8 115 Console wire 2 1

16 Spindle ring 2 41 Left motor cover 1 66 Cushion pad 4 91 Cross screw M4*15 6 116 Optical sensor 1

17 Cylinder connector 2 42 Middle motor cover 1 67 Cover 4 92 Cross screw M4*8 19 117 Optical sensor bracket 1

18 Motor base 1 43 Right motor cover 1 68 Foam 2 93 Cross screw M4*12 2 118 Square cushipn 4

19 Cylinder switch 2 44 Upper cylinder cover 2 69 Sator for Side rail 6 94 Cross screw M6*25 8 119 Running board cushion 8

20 Vbelt 1 45 Under cylinder cover 2 70 Lock spring 4 95 Cross screw ST4*15 42 120 Cross screw M4*8 2

21 Running belt 1 46 Left rear cover 1 71 Screw 2 96 Cross screw ST4*10 15 121 Safetykey 1

22 Running board 1 47 Right rear cover 1 72 Flat washer Φ35*Φ8.5*2.5 297 Cross screw ST4*10 4 122 Cylinder spring 2

23 Front roller 1 48 Side rail 2 73 Lubrication cover 2 98 Cross screw ST3*10 2 123 Cross screw ST4*15 8

24 Rear roller 1 49 Insertion strip 2 74 Hexscrew M10*65 1 99 Cross screw ST2.9*6.5 2 124 Cross screw M5*15 4

25 Motor 1 50 Left decoration part 1 75 Hexscrew M10*55 2 100 Lock nut M10 4

Before use

STARTING THE TREADMILL

LOCATION

Place the treadmill on flat floor before use.

MAINS SUPPLY

Ensure that the power lead is plugged into a suitable, live, mains socket.

PULSE SENSOR

There are two ways to measure your heart rate. One is using the handle pulse sensor .

The other is using a chest belt.The handle pulse is setting for the priority. For HR training,

the use of a chest belt to measure pulse rate is strongly recommended.

START/ STOP

1、Ensure that the SAFETY KEY is attached to the console.

2、To start the treadmill, press START button.

3、To start using the treadmill, stand on each side rail with your feet.

4、Attach the SAFETY KEY to your clothing at your waist.

5、Follow the user manual to start using the treadmill.

ADJUSTMENTS

BELT ADJUSTMENT INSTRUCTION

1、Belt adjustment bolts are located at the rear of the

treadmill, as show on the right.

2、Belt moving (tracking) to the right :

Start the treadmill and set at 4 kph. Using an allen key

wrench, turn the right adjustment bolt clockwise 1/4 of a

turn. Continue adjustments at 1/4 of a turn untill belt

returns to the center. Continue to run the treadmill for a

short period of time monitoring the belt movement to

ensure you have not made an over adjustment.

3、Belt moving (tracking ) to the left :

Start the treadmill and set at 4 kph. Using an allen key

wrench, turn the right adjustment bolt clockwise 1/4 of a

turn. Continue adjustments at 1/4 of a turn untill the belt

returns to the center. Continue to run the treadmill for a

short period of time monitoring the belt movement to

ensure you have not made over adjustment.

4、Ifthebeltappearstobeloose,tightenboth boltsevenly

bya1/4turn.Ifitappears tight,loosenbothboltsevenlya

1/4turn.

5、To reduce the friction (sticking) of the walking belt and

min wear, silicone lubricant may be applied directly to the

walking board and the underside of the belt.

Note: The lubricant may be applied whenever sticking

Left tension bolt

Right tension bolt

FIG 6

occurs. To apply, simply lift up the running board and

spray the lubricant onto the running board and the

underneath of the running belt.

MOTOR BELT ADJUSTMENT

All treadmills‟ motor belts have been adjusted before they

are sent out from factory. But it must be adjusted for

second time after building up . Also maybe after a long

time using, the occasion, slipping/ looseness may occur.

User can adjust the motor belt as below:

a. Turn the adjusting screw counter-clockwise with

the wrench.

b. When the motor strap recovers to be

tight/non-slipping, it is OK.

NOTE：Fly wheel should be cleaned regularly.

ATTACHING THE SAFETY KEY

USING THE TREADMILL

Console

Motor belt

FIG 7

a. Attach the SAFETY KEY to the console before turning the machine on. Attach the clip to

your clothing at your waist before beginning your workout. If the SAFETY KEY disconnects

during use in case of emergency, the treadmill will slow down and stop. Also, an intermittent

beep will occur and the display will show „--- --- ---„

START

Incline ”+”

Program

LCD window

Incline”-”

Speed”-”

STOP

Quick incline button

Quick speed button

MODE

Speed”+”

QUICK START

1、Attachthesafetykeytothe consoleandyourclothing.

2、Connect thetreadmilltothepowersupplyand switch on.

3、Pressthe STARTbutton.The treadmillwillcount downfrom5and thenstart at1.0km/h.

4、Moveontotherunningsurface.

5、Press the SPEED UP or SPEED DOWN button to increase or decrease the SPEED.

6、Press the INCLINE UP or INCLINE DOWN button to increase or decrease the INCLINE.

7、Pressthe STOPbuttonto stopthetreadmillandresetall values.

PRESET PROGRAM SELECT

1、Connectthe treadmillto thepowersupply.After program selected, press START button.

2、RepeatedlypressthePROGRAM KEY untilthe requiredprogramhasbeen selected.The

table as belowshoweachprogramwiththeirspeedsinkm/h and their inclines in %.The

treadmill willstayat eachsectionfora tenth ofthetimeselectedforthe workout.

Program

P01

P02

P03

P04

P05

P06

P07

S/N

speed

in-cline

speed

in-cline

speed

in-cline

speed

in-cline

speed

in-cline

speed

in-cline

speed

in-cline

3.0

1.0

5.0

3.0

2.0

4.0

5.0

7.0

9.0

6.0

12.0

5.0

7.0

5.0

1.0

4.0

12.0

6.0

9.0

10.0

7.0

8.0

12.0

8.0

4.0

5.0

12.0

10.0

12.0

3.0

6.0

4.0

2.0

4.0

12.0

3.0

8.0

12.0

3.0

12.0

4.0

3.0

6.0

4.0

2.0

4.0

8.0

3.0

9.0

8.0

5.0

12.0

4.0

5.0

12.0

6.0

4.0

3.0

2.0

4.0

2.0

3.0

2.0

FIG 8

P08

P09

P010

P011

P012

P13

P14

2.0

4.0

5.0

6.0

12.0

5.0

7.0

5.0

7.0

6.0

2.0

6.0

7.0

10.0

7.0

9.0

6.0

12.0

8.0

9.0

8.0

7.0

12.0

2.0

6.0

12.0

5.0

2.0

8.0

9.0

6.0

12.0

7.0

5.0

12.0

6.0

12.0

9.0

5.0

2.0

9.0

10.0

12.0

7.0

5.0

3.0

2.0

3.0

7.0

12.0

10.0

7.0

3.0

6.0

5.0

3、Press the SPEED UP orSPEED DOWNbutton toadjust the length of the workout.

4、Pressthe INCLINEUP or INCLINE DOWN button to adjust the INCLINE of the treadmill.

5、PressSTARTtobeginthedistance.

6.、PresstheSTOPbuttonatanytimeto stoptheworkout.

MANUAL MODE:

1、Connectthetreadmilltothepowersupplyand switchon.

2.、Attachthesafetykeytotheconsoleandyourclothing.

3、PresstheMODEbuttontochoose TIME,DISTANCEorCALORIELIMITS foryourexercise

routine.Alternatively,if youwish to set a TIME,DISTANCEorCALORIE limit, press the

SPEED UP/DOWN button until the appropriate option isselected.

Thedefaultsettingfortheaboveare：Time：30 minutes

Distance：1.0 kilometre Calorie

Limits：50 kilocalories

4、Press the SPEED UP or SPEED DOWN button to adjust the speed.

Press the INCLINE UP or INCLINE DOWN button to adjust the incline.

5、Whentherequiredlimithasbeenset,presstheSTARTbutton.

6、Thetreadmillwillstartat1 km/h.

7、Thespeedcanbeadjustedbyeither:

a) Using the SPEED UP/ DOWNbutton to adjust speed with intervals of 0.1kph;

b)PressingtheQUICK SPEED button ontheconsole(4~16kph);

c)Using the speed control button on the handle bar to adjust speed with intervals of

0.1kph;

8、The inclinecanbeadjustedbyeither:

a) Using the INCLINE UP/ DOWN button to adjust incline with intervals of 1%;

b) PressingtheQUICK INCLINE button ontheconsole(3~12%);

c) Using the incline control button on the handle bar to adjust incline with intervals of

1%;

9、PresstheSTOPbuttonatanytimetopausethe workout;

10、PresstheSTARTbuttontocontinuetheworkout;

To reset all values, disconnect and reconnect the SAFETY KEY.

HRC PROGRAMS

HRC Function Instruction

A. HRC setting values

1、Age: 15 to 80 .

2、Target heart rate: 80－(220-AGE)X0.9.

3、The max heart rate of user: 220-AGE.

4、Heart rate difference ＝(target heart rate –actual heart rate) .

5、HRC is only useful for wireless transmitter, which is not suitable for handle pulse.

B. Operation instructions

1、Press PROGRAM KEY to select HRC program. The LCD window will display HRC. It is

not functional to press “Start” key. You must enter “Mode” key to enter and confirm AGE

SETTING,TARGET HEART RATE SETTING,TIME SETTING.

2、Press Mode key to enter AGE SETTING firstly, it can be set from 15 to 80 by SPEED or

INCLINE UP/DOWN KEY.

3、Press Mode key to enter TARGET HEART RATE SETTING, it can be set: 80－

(220-AGE)X0.9 by SPEED or INCLINE UP/DOWN KEY.

4、Press Mode key to enter TIME SETTING, it can be set by SPEED or INCLINE

UP/DOWN KEY.

Note: If actual heart rate is over (220-AGE), speed and incline value decrease to the default

value till 0, with alarm every 15 seconds.

If there is no heart rate signal or the user is using the handle pulse, the speed will

keep unchanged. If there is still no heart rate signal from the chest belt for two 30 seconds,

the speed will reduce to 1.0KM/H and the incline fall to 0. The machine alarms every 15

seconds and then stop automatically.

HRC Programs (chest belt transmitter compulsory)

P15: HR1 - weight loss:

After enter into HR1, set values of age , THR (TARGET HEART RATE) and Time well.

Press START: the treadmill will run at 1 kph for 1 minute as warm-up. After this timeframe

the computer will adjust speed with 1 km every 30 seconds till THR (+/- 5 BPM) is reached.

In case the THR is exceeded, the computer will automatically reduce speed till THR is

reached again.

P16: HR2- cardio:

After enter into HR2,set values of age , THR (TARGET HEART RATE) and Time well.

Press START: the treadmill will run at 1 kph for 1 minute as warm-up,adjust speed

manually.. After this timeframe the computer will adjust incline with 1% every 30 seconds till

THR (+/- 5 BPM) is reached. In case the THR is exceeded, the computer will automatically

reduce incline till THR is reached again.

Inhaltsverzeichnis

Andere TOORX Tretmühle Handbücher

TOORX

TOORX TRX 100 Bedienungsanleitung

TOORX

TOORX MIRAGE C60 Bedienungsanleitung

TOORX

TOORX TRX WALKER PRO Bedienungsanleitung

TOORX

TOORX TRX 3500 TFT Bedienungsanleitung

TOORX

TOORX TRX 40 S EVO Bedienungsanleitung

TOORX

TOORX TRX GRAND CRUISER Bedienungsanleitung

TOORX

TOORX TRX 65 S Bedienungsanleitung

TOORX

TOORX TRX 3500 Bedienungsanleitung

TOORX

TOORX TRX46S Bedienungsanleitung

TOORX

TOORX EXPERIENCE PLUS Bedienungsanleitung

TOORX

TOORX TRX 9000 Bedienungsanleitung

TOORX

TOORX POWER MAG Bedienungsanleitung

TOORX

TOORX TRX 50 S EVO Bedienungsanleitung

TOORX

TOORX TRX FORCE CROSS Bedienungsanleitung

TOORX

TOORX TRX SMART COMPACT Bedienungsanleitung

TOORX

TOORX RACE CROSS Bedienungsanleitung

TOORX

TOORX CHRONO PRO TRX 2500 TFT Bedienungsanleitung

TOORX

TOORX TRX Endurance Bedienungsanleitung

TOORX

TOORX CHRONO PRO TRX 3000 Bedienungsanleitung

TOORX

TOORX MIRAGE S70 Bedienungsanleitung

TOORX

TOORX ERX60 Bedienungsanleitung

TOORX

TOORX TRX8500 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung