1 INTRODUCTION
1.1 PURPOSE OF THE INSTRUCTION MANUAL
This user and maintenance manual contains data concerning the performance, technical characteristics, use and maintenance
methods for the standard and correct operation of the machine.
The user is recommended to read it carefully and to comply with the rules and procedures contained in it, as they provide important
indications regarding the safety of use.
This will allow to optimize the operation, increase the duration of the machine, and operate safely.
Failure to comply with the suggested rules can cause malfunctions, anomalies, or damages; the machine must therefore be
intended only for the use for which it was expressly designed.
The manufacturing company will not be held responsible for breakages, accidents, or various inconveniences due to the non-
compliance (or in any case non-application) of the requirements contained in this manual. The same applies to the execution of
modifications, variations, and/or the installation of accessories, that were not authorized in advance.
1.2 HOW TO READ AND USE THE INSTRUCTION MANUAL
The machine was manufactured in accordance with all Community rules concerning the free movement of industrial products in
the countries of the European Community (check the Machinery Directive 2006/42/EC).
The machine is then provided complete with all the documentation required by these regulations.
The user manual, maintenance and spare parts is an integral part of it and contains all the information necessary for a good
operation of the machine with particular attention to the safety of the involved personnel.
1.3 PRESERVATION OF THE MANUAL
This instruction manual is an integral part of the machine and must therefore be carefully preserved for any further consultation.
1) It is recommended to use the manual carefully so as not to damage the content and not compromise its functionality.
2) Do not remove, tear or rewrite parts of the manual for any reason.
3) Store the manual in places protected from moisture and heat.
4) The user manual must be stored near the machine so that consultation is facilitated.
5) The place of preservation of the manual must be clearly identifiable and known to all operators authorized to use the machine.
6) Once the consultation has been completed, the manual must be stored in the appropriate place of storage.
7) The manual must be kept for the duration of use of the machine and transmitted to any other user or subsequent owner.
1.4 MANUAL INSTRUCTION UPDATE
The manufacturing company reserves the right to make changes, additions or improvements to the manual itself, without this
being a reason to consider this publication inadequate.
1.5 RECIPIENTS
This documentation is addressed to qualified and appropriately trained technical staff.
Only qualified personnel have the necessary technical knowledge to correctly interpret and apply concretely the safety regulations
and warnings contained in the specific documents.
Knowledge and correct application of safety regulations and warnings are prerequisites for the installation and setup free of
hazards as well as for safety during operation and maintenance of the described product.
"Qualified personnel" means those persons who, by reason of their training, experience, education, knowledge of the relevant
standards, requirements, measures for the prevention of accidents and conditions of service, have been authorized by the person
in charge for the safety concerning machineries to carry out any necessary activities and to be able to recognize and avoid any
possible danger.
