Topcon X30 Bedienungsanleitung
X30 System Components
X30 Monitor
- Monitor is 12.1 inches
- LINUX operating system – not windows
- Can-based communication. No serial ports
- New part number 3132-10
LED Light Bar
Battery Status LED
Supply Status LED
Light Sensor
The following offers a general guide to the meaning of
battery status LED colors.
Battery fully charged
Battery partly charged
Battery flat
Charging (flashing)
The following offers a general guide to the meaning of
power supply status LED colors.
Good supply
Low supply
Very low supply or off
Day/Night mode changes the brightness of the display.
Settings are Day, Night and Auto. Auto
light mode will set the mode automatically
depending on light conditions
Brightness Control adjusts the brightness
of the display. Use plus or minus to adjust
display.
Use the Topcon Logo for screen shots or navigate
through your made global home screens.
Before removing the USB, always
disconnect first by touching the USB Eject
icon on the base of the console. A message
will display that it is safe to remove the
USB.
Bridge ECU
- Added into the cab of tractor
- Replaces SRC interface box used for the X20
- Translates RS485 from on tank ECU to CAN for X30
- ISOBUS Capable ( can be used with a ISO terminal
future)
- Bourgault Part Number 3132-13
- Topcon number AGA4634
- Both the ISO bridge adapter cable and the main
power cable hooks into this
- Upgradeable though the USB port
- Connects X30 to power, bridge ECU, GPS
Signal, remote steer engage ( if equipped with
Topcon)
- Bourgault Part Number 3132-12-01
- Topcon Harness AGA5072
X30 Main Harness
Hooks to main battery cable.
CAN 1 to the ISO bridge through the Can
harness
ENGAGE wire Hooks to the ISO bridge
adapter cable AGA4885
Switched power connects to terminator
Harness AGA4678
COM 2 hooks to outside receiver for GPS
COM 1 Hooks to GPS adapter cable
AGA4219 for connection to outside receiver
for GPS
NOTE; GPS can be brought in though either COM 1 or Com 2
Also the can 2, remote mapping and radar plugs are not used.
Power and communication plugs that
hook to the back of the X30
Can harness
- Connects bridge ECU to Topcon monitor harness
- Bourgault Part number 3132-09-01
- Harness Number AGA5251
Hooks to the ISO Bridge
Connects to the can1 plug on the
main power Harness AGA5072
Connects to the terminator harness
AGA4678
Terminator harness
- Connects Can harness to Topcon monitor harness
- Bourgault Part number 3132-09-02
- Harness Number AGA4678
Terminator part number
Bourgault 3132-09-03
Topcon AGK159
Connects to the iosbus plug on the
Can harness AGA5251
Connects to switched power plug
on the monitor harness AGA5072
Andere Handbücher für X30
1
Inhaltsverzeichnis
Andere Topcon Landwirtschaftliche Geräte Handbücher
Topcon
Topcon Norac UC7 Bedienungsanleitung
Topcon
Topcon CL-10 LTE EU Bedienungsanleitung
Topcon
Topcon Apollo ISOBUS UT Bedienungsanleitung
Topcon
Topcon OPUS A3 STANDARD Full Bedienungsanleitung
Topcon
Topcon YieldTrakk YM-1 Bedienungsanleitung
Topcon
Topcon OPUS A8 STANDARD Basic Bedienungsanleitung
Topcon
Topcon X35 Bedienungsanleitung
Topcon
Topcon ISOBUS Artemis Gebrauchs- und Pflegehandbuch
Topcon
Topcon CropSpec AGA5408 Bedienungsanleitung
Topcon
Topcon MACHINE CONTROL AG System Five Bedienungsanleitung
