Topcon MC-X1 Gebrauchs- und Pflegehandbuch

.$9

&YDBWBUPSIndicate System

Installation and Calibration Manual

MC-X1

Excavator Indicate System

Installation andCalibration

Manual

PartNumber1022461‐01

RevB

©CopyrightJune2018

AllcontentsinthismanualarecopyrightedbyTopcon.Allrightsreserved.Theinformationcontainedherein

maynotbeused,accessed,copied,stored,displayed,sold,modified,published,distributed,orotherwise

reproducedwithoutexpresswrittenconsentfromTopcon.

For more information contact Synergy Positioning Systems or

visit the Synergy Positioning Systems website at www.synergypositioning.co.nz

All branches: Phone 0800 867 266 Email: [email protected]

Excavator Indicate System P/N: 1022461-01

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Indicate System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2D System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3D System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

MC-X1 Connectivity and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting to the MC-X Web Interface from a PC . . . . . . . . . . . . . . . . . . . . . 5

Connecting to the MC-X Web Interface via MCXCONFIG. . . . . . . . . . . . . . . . 5

Viewing General Information and Firmware . . . . . . . . . . . . . . . . . . . . . . . . . 6

Upgrading MC-X1 Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Resetting the MC-X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Assigning GR-i3 Vibration Mount to Auxiliary . . . . . . . . . . . . . . . . . . . . . . . . 8

Loading GR-i3 Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Loading GNSS Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

System Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Loading EASy-Proof Radio Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Factory Reset for the GR-i3 via TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Configuring SL-100 for MC-X1 Communication . . . . . . . . . . . . . . . . . . . . . . . 20

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

TS-i3 Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

TS-i3 Sensor Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

CAN Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Hitch Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DogBone Sensor (Optional Mounting Location). . . . . . . . . . . . . . . . . . . . . . . . . 25

Tilt Bucket Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Tilt Rotator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Stick Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Boom Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Secondary Boom Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Body Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

LS-B10W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

MC-X1 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

S-B10W Laser Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

GNSS Antenna, Mount and Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Table of Contents

Excavator Indicate System P/N: 1022461-01

WiFi Antenna and Magnet Mount (If Purchased) . . . . . . . . . . . . . . . . . . . . . . 33

Machine Measurements and Configuration . . . . . . . . . . . . . . . . . . . . . . . 34

Taking Machine Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

GR-i3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Body and Boom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

DogBone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

LS-B10W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Entering Sensor Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Audible Guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Lightbars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Configuration Complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Sensor Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Body Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Boom Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Secondary Boom Sensor (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Stick Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Excavator Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

DogBone Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

On Hitch/Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Attachment Edge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Multiple Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Tilt Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Tilting Rotating Bucket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Calibrating the LS-B10W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Setup Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Testing Machine Element Sensors for Accuracy . . . . . . . . . . . . . . . . . . . . . . . 60

String Line Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Hitch Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Stick Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Boom Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

LS-B10W Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

iii

Table of Contents

Excavator Indicate System P/N: 1022461-01

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

MC-X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

GR-i3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

WiFi Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

WiFi Antenna Magnet Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Safety Warnings and Regulatory Information . . . . . . . . . . . . . . . . . . . . . 73

General Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

RF Radiation Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

FCC Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

IC Statements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Déclaration de conformité IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Open Source Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Preface

Excavator Indicate System P/N: 1022461-01

Preface

Thank you for purchasing this Topcon product. The materials available in this Manual (the “Manual”) have been

prepared by Topcon Positioning Systems, Inc. (“TPS”) for owners of Topcon products, and are designed to assist

owners with the use of the product and its use is subject to these terms and conditions (the “Terms and

Conditions”).

Term s an dConditions

Use

This product is designed to be used by a professional. The user should have a good knowledge of the safe use of

the product and implement the types of safety procedures recommended by the local government protection

agency for both private use and commercial job sites.

Copyrights

All information contained in this Manual is the intellectual property of, and copyrighted material of TPS. All rights

are reserved. Do not use, access, copy, store, display, create derivative works of, sell, modify, publish, distribute,

or allow any third party access to, any graphics, content, information or data in this Manual without TPS’ express

written consent and may only use such information for the care and operation of the product. The information

and data in this Manual are a valuable asset of TPS and are developed by the expenditure of considerable work,

time and money, and are the result of original selection, coordination and arrangement by TPS.

Trademarks

X-52™, X-72™, X-53™, X-73™, MC-X1™, GX-55™, GX-75™, LS-B10W™, TS-i3™, TS-i3d™, 

GR-i3™, 3D-MC™, Topcon®, and Topcon Positioning Systems™ are trademarks or registered trademarks of TPS.

Windows® is a registered trademark of Microsoft Corporation. The Bluetooth® word mark and logos are owned

by Bluetooth SIG, Inc. and any use of such marks by Topcon Positioning Systems, Inc. is used under license. Other

product and company names mentioned herein may be trademarks of their respective owners.

Disclaimer of Warranty

EXCEPT FOR ANY WARRANTIES IN AN APPENDIX OR A WARRANTY CARD ACCOMPANYING THE PRODUCT, THIS

MANUAL AND THE PRODUCT ARE PROVIDED “AS-IS.” THERE ARE NO OTHER WARRANTIES. TPS DISCLAIMS ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE OR PURPOSE. TPS AND ITS

DISTRIBUTORS SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED

HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING,

PERFORMANCE OR USE OF THIS MATERIAL OR THE PRODUCT. SUCH DISCLAIMED DAMAGES INCLUDE BUT ARE

NOT LIMITED TO LOSS OF TIME, LOSS OR DESTRUCTION OF DATA, LOSS OF PROFIT, SAVINGS OR REVENUE,

OR LOSS OF THE PRODUCT’S USE. IN ADDITION TPS IS NOT RESPONSIBLE OR LIABLE FOR DAMAGES OR COSTS

INCURRED IN CONNECTION WITH OBTAINING SUBSTITUTE PRODUCTS OR SOFTWARE, CLAIMS BY OTHERS,

INCONVENIENCE, OR ANY OTHER COSTS. IN ANY EVENT, TPS SHALL HAVE NO LIABILITY FOR DAMAGES OR

OTHERWISE TO YOU OR ANY OTHER PERSON OR ENTITY IN EXCESS OF THE PURCHASE PRICE FOR THE

PRODUCT.

License Agreement

Use of any computer programs or software supplied by TPS or downloaded from a TPS website (the “Software”)

in connection with the product constitutes acceptance of these Terms and Conditions in this Manual and an

agreement to abide by these Terms and Conditions. The user is granted a personal, non-exclusive, non-

transferable license to use such Software under the terms stated herein and in any case only with a single product

Please read the terms and conditions carefully.

Preface

Excavator Indicate System P/N: 1022461-01

or single computer. You may not assign or transfer the Software or this license without the express written

consent of TPS. This license is effective until terminated. You may terminate the license at any time by

destroying the Software and Manual. TPS may terminate the license if you fail to comply with any of the Terms

or Conditions. You agree to destroy the Software and manual upon termination of the use of the product. All

ownership, copyright and other intellectual property rights in and to the Software belong to TPS. If these license

terms are not acceptable, return any unused software and manual.

Confidentiality

This Manual, its contents and the Software (collectively, the “Confidential Information”) are the confidential and

proprietary information of TPS. You agree to treat TPS’ Confidential Information with a degree of care no less

stringent that the degree of care you would use in safeguarding your own most valuable trade secrets. Nothing

in this paragraph shall restrict you from disclosing Confidential Information to your employees as may be

necessary or appropriate to operate or care for the product. Such employees must also keep the Confidentiality

Information confidential. In the event you become legally compelled to disclose any of the Confidential

Information, you shall give TPS immediate notice so that it may seek a protective order or other appropriate

remedy.

Website; Other Statements

No statement contained at the TPS website (or any other website) or in any other advertisements or TPS

literature or made by an employee or independent contractor of TPS modifies these Terms and Conditions

(including the Software license, warranty and limitation of liability).

Safety

Improper use of the product can lead to injury to persons or property and/or malfunction of the product. The

product should only be repaired by authorized TPS warranty service centers. Users should review and heed the

safety warnings in an Appendix.

Miscellaneous

The above Terms and Conditions may be amended, modified, superseded, or canceled, at any time by TPS. The

above Terms and Conditions will be governed by, and construed in accordance with, the laws of the State of

California, without reference to conflict of laws.

Manual Conventions

This manual uses the following conventions:

Convention Description Example

Bold Menu, or drop-down menu selection File > Exit (Click the File menu and click

Exit)

Name of a dialog box or screen From the Connection screen...

Button or key commands Click Finish.

Mono User supplied text or variable Type guest, and click Enter.

Italic

Reference to another manual or help document Refer to the

Topcon Reference Manual.

Further information to note about system configuration, maintenance, or setup.

Supplementary information that can have an adverse affect on system operation, system

performance, data integrity, or measurements.

Preface

Excavator Indicate System P/N: 1022461-01

Notification that an action has the potential to result in minor personal injury, system

damage, loss of data, or loss of warranty.

Notification that an action has the potential to result in personal injury or property

damage.

Notification that an action has the potential to result in severe personal injury or death.

Introduction

Excavator Indicate System P/N: 1022461-01

Introduction

This manual discusses how to install and calibrate Topcon’s Indicate Excavator Systems utilizing the 

MC-X1 Controller.

The TS-i3 single and dual axis sensors used in the Topcon excavator systems measure the pitch and roll

angle of various machine elements. Each sensor accurately measures a gravity-referenced angle of the

body, boom, stick, and attachment, sending this angle data to a GX-55/GX-75 (GX Series) display to

provide precise grade. Each sensor is configured and calibrated for its specific location on the excavator.

The dual axis body sensor functionality is unique as it measures both pitch and roll (cross slope) of the

machine.

Indicate System Components

Tabl e 1 lists the hardware and software components of the indicate systems.

The MC-X1 System Architecture requires all of the sensors to be running on a

500kbps Baud Rate. Legacy sensors used in MC-R3, MC-i3, and MC-i4 systems

are not compatible with the MC-X1 excavator system. Ensure that the sensors

to be used in the MC-X1 system have the correct part number and label

denoting the 500kbps Baud Rate.

Table 1. 2D and 3D Excavator Indicate System Components

Hardware Software/Firmware

MC-X1 Controller 3D-MC V12.2.307 or later

GX-55/GX-75 Display (GX Series) MCXCONFIG 

(MC-X Machine Control Gateway)

TS-i3 Tilt Sensors (500kbps Baud Rate) MC-MCX 6.01 or later

LS-B10W Laser Receiver (500kbps Baud Rate) Topcon Receiver Utility (TRU) 3.2 or later

EASy-Proof Radio Module (3D Only)

GR-i3 GNSS Antenna with Vibration Mount (3D Only)

Optional Optional

SL-100 SL-100 Firmware 1.15 or later

WiFi Antenna (OMNI 2.4-2.5 GHz)

WiFi Antenna Magnet Mount (0-6 GHz)

Introduction

Indicate System Components

Excavator Indicate System P/N: 1022461-01

The TS-i3 Tilt Sensors, the MC-X1 Controller, the GX Series display, and the LS-B10W Laser Receiver

make up the 2D indicate system. The LS-B10W adds a laser height reference, and is calibrated for its

location on the stick of the excavator. The 3D system (Figure 1) utilizes two GR-i3 GNSS Antenna and

a radio module for precise 3D control.

Figure 1: Machine Components

Bucket (Hitch)

Sensor

LS-B10W

Laser Receiver

LS-B10W

Laser Receiver

Body Sensor

Boom Sensor

Stick

Sensor

Stick

Sensor

Radio Module

GNSS Antenna 2X

GX Series Display

MC-X1 Controller

Optional

DogBone

Sensor

P/N:1015925-01

S/N:1420-XXXXX

When installing components, use the Topcon supplied fuse or fused power

from the machine of the same rating.

System ground must be connected to the frame side of the ground

disconnect switch, not directly to the negative battery terminal.

Inhaltsverzeichnis

Andere Topcon Touchscreen Handbücher

Topcon

Topcon X-63 Gebrauchs- und Pflegehandbuch

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung