TOPMAQ PHD50 Bedienungsanleitung

The Instruction of the

Post Hole Digger

Please ReadThis Manual BEFORE UsingThis Tool

It is the purchaser and/or operator’s responsibility to....

lRead and understand the information contained in this

manual.

lOperate, lubricate, assemble and maintain the equipment in

accordance with all instructions and safety procedures in this

manual.

lInspect the equipment and replace or repair any parts that are

damaged or worn which under continued operation would

cause damage, wear to other parts, or cause a safety hazard.

SAFETY

READ AND FOLLOW THE

INSTRUCTIONS IN THIS MANUAL

AND ESPECIALLY IN THE

SAFETY SECTION. FAILURE TO

DO SO CAN RESULT IN SERIOUS

INJURY OR DEATH.

TAKE NOTE! THIS SAFETY

ALERT SYMBOL FOUND

THROUGHOUT THIS MANUAL IS

USED TO CALL YOUR

ATTENTION TO INSTRUCTIONS

INVOLVING YOUR PERSONAL

SAFETY AND THE SAFETY OF

OTHERS.

THISSYMBOL MEANS

ATTENTION

BECOMEALERT!

YOUR SAFTEY IS INVOLVED

SIGNAL WORDS:

The signal words DANGER, WARNING and CAUTION are used with

the safety messages in this manual and with each safety signs. They are

defined as follows:

DANGER: Indicates an immediate hazardous situation that, if not avoided,

could result in serious injury or death. This signal word is to be limited to

the most extreme situations typically for machine components that, for

functional purposes, cannot be guarded.

WARNI NG: Indicates a potentially hazardous situation that, if not

avoided, could result in serious injury or death, and includes hazards that

are exposed when guards are removed. It may also be used to alert against

unsafe practices.

CAUTION: Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury. It may also be used to alert against

unsafe practice.

EQUIPMENT SAFETY GUIDELINES

lSafety of the operator and by standards is one of the main concerns in

designing and developing a digger. However, every year accidents

occur which could have been avoided by a few seconds of thought and

a more careful approach to handling equipment. You, the operator,

can avoid many accidents by observing the following precautions and

insist those working with you, or for you, follow them.

lIn order to provide a better view, certain photographs or illustrations

in this manual may show an assembly with a safety shield removed.

However, equipment should never be operated in this condition. Keep

all shields in place. If shield removal becomes necessary for repairs,

replace the shield prior to use.

lReplace any safety sign that is not readable or is missing. Copies of

such safety signs is shown in this manual.

lNever use alcoholic beverages or drugs that can hinder alertness or

coordination while operating this equipment. Consult your doctor

about operating this machine while taking prescription medications .

lUnder no circumstances should children under the age of 18 be

allowed to work with this equipment. Do not allow persons to

operate or assemble this unit until they have read this manual and

have developed a thorough understanding of the safety

precautions and of how it works. Review the safely instructions

with all uses annually.

lThis equipment is dangerous to children and persons unfamiliar with

its operation. The operator should be a responsible, properly trained

and physically able person familiar with farm machinery and trained

in this equipment’s operations. If the elderly are assisting with farm

work, their physical limitations need to be recognized and

accommodated.

lUse a tractor equipped with a Roll Over Protective System and seat

bells. (ROPS)

lNever exceed the limits of a piece of machinery. If its ability to do a

job, or to do so safely, is in question- DON’T TRY IT.

lDo not modify the equipment in any way. Unauthorized modification

could result in serious injury or death and may impair the function and

life of the equipment

lIn addition to the design and the confirmation of this implement,

including safety signs and safety equipment, hazard control and

accident prevention are dependent upon the awareness, concern,

prudence ,and proper training of personnel involved in the operation,

transport maintenance, and storage of the machine. Refer also to

safety messages and operation instruction in each of the appropriate

sections of the tractor and post hole digger manuals. Pay close

attention to the safety signs affixed to the tractor and the post hole

digger．

ASSEMBLY INSTRUCTIONS

1. Attach arch to lower hitch points. If tractor has Category 2 hitch, use

bushings provided on arch pins.

2. Attach arch to boom with pin and cotter pins provided.

3. Attach gearbox to boom with pins and cotter pins provided.

4. Attach PTO shield to top of gearbox with bolts provided.

5. Prepare PTO for attachment.

a. Remove any foreign material or paint from input shaft on gearbox.

b. Separate PTO driveshaft. Use a good grade of gun grease and put

a light coat on U-joint drive shaft. Then insert into drive tube.

c. Attach PTO to gearbox.

d. Make sure roll pin is in groove of input shaft but not tight against

bot tom of groove so yoke will rotate freely.

e. Put in shear bolt.

f.Place snap yoke on tractor PTO.

g. Raise and lower the boom through it’s complete operation arch

and check that nothing interferes with the operation. If anything

interferes , make the proper three-point adjustments .

6．Attach the output shaft shield to lower gearbox.

7．Attach the auger to gearbox using bolts，Lock washers，and hex nuts

provided.

OPERATING INSTRUCTIONS

1. Lower auger point slowly to ground. Auger point should be about 4”

to the rear of the plumb line of the center of the top of the auger·

2. Set brake or use Park position.

3. Engage PTO shaft clutch at half throttle and slowly lower auger into

ground. In some types of soil it may be necessary to hold auger back

from screwing Itself Into the ground with the hydraulic control lever．

4. In some types of soil, for best cleaning action , allow auger to dig a

foot or so and raise auger almost out of the ground and then dig

deeper. Repeat as necessary.

5. When auger has reached the desired depth , leave auger at this depth

for a very short period to assist in cleaning out the hole.

6. If shear bolt shears，replace with Manufacturers shear bolt or with one

with the same specifications number Grade 2.

7. If auger becomes lodged below the ground, DO NOT attempt to lift

auger out of ground by hydraulic lift power alone. Reverse the

rotation of the auger by several turns. This can be accomplished by

using a bar on the universal joints. After freeing the auger，slowly lift

with auger slowly rotating.

8. DO NOT transport digger with PTO shaft engaged. This may result in

damage to universal joints.

9. Check post hole digger daily foe any damaged or loose bolts，securing

pins, etc.

LUBRICATION SCHEDULE

1. Fill the post hole digger gearbox with SAE 90 EP oil and check

periodically to maintain correct oil level.

2. After the first fifty (50) hours it is recommended that the gearbox be

drained, flushed and refilled with SAE 90 EP oil. Then every 250

hours.

3. Universal joints to be greased after digging 300 holes. Tube and shaft

should be greased every other time.

SAFETY TRAINING

lSafety is a primary concern in the design and manufacture of our

product. Unfortunately, our efforts to provide safe equipment can be

wiped out by a single careless act of an operator or bystander.

lIn addition to the design and configuration of equipment, hazard

control and accident prevention are dependent upon the awareness ,

concern, Prudence and proper training of personnel involved in the

operation, transport，maintenance and storage of this equipment.

lIt has been said，“ The best safety device is an informed, careful

operator. "We ask you to be that kind of operator. It is the operator's

responsibility to read and understand all safety and operating

instructions in the manual and to follow them. Accidents can be

avoided.

lWorking with unfamiliar equipment can lead to careless injuries. Read

this manual, and the manual for your tractor，before assembly or

operating, to acquaint yourself with the machines. If this machine is

used by any person other than you，it is loaned or rented, it is the post

hole digger owner 's responsibility to make certain that owner＇s

manual be available to the operator prior to operating:

1、Reads and understands the operator's manuals.

2、Is Instructed In safe and proper use.

lKnow your controls and how to stop tractor, engine, and the post hole

digger quickly in an emergency. Read this manual and the one

provided with your tractor.

lTrain all new personnel and review instructions frequently with

existing workers . Be certain only a properly trained and physically

able person will operate the machinery. A person who has not read

and understood all operating and safety Instructions is not qualified to

operate the machine.

lAn untrained operator exposes himself and bystanders to possible

serious injury or death. If the elderly are assisting with farm work ,

their physical limitations need to be recognized and accommodated .

PREPARTION

lNever operate the tractor and post hole digger until you have read and

completely understand this manual, the Tractor Operator’s Manual,

and each of the safety messages found on the safety signs on the

tractor and digger.

lPersonal protection equipment including hardhat, safety glasses,

safely shoes, and gloves are recommended during assembly,

installation, operation, adjustment, maintenance，repairing, removal,

or moving the implement. Do not allow long hair, loose fitting

clothing, or jewelry to be around equipment.

lPROLONGED EXPOSURE TO LOUD NOISE MAY CA USE

PERMANENT HEARING LOSS! Tractors with or without post hole

diggers attached can often be noisy enough to cause permanent, partial

hearing loss. We recommend that you wear hearing protection on a

full-time basis if the noise in t he operator's position exceeds 80 db.

Noise over 80 db on a long-term basis can cause severe hearing loss.

Noise over 90 db adjacent to the operator over a long-term basis may

cause permanent, total hearing loss. NOTE: Hearing loss from loud

noise (from tractors, chain saws, radios, and other such source close to

the ear) is cumulative over a lifetime without hope of natural

recovery.

lOperate the post hole digger only with a tractor equipped with an

approved Roll-Ove-Protective System (ROPS}. Always wear your

seat belt Serious injury of even death could result from falling off the

tractor -- particularly during a tum over when the operator could be

pinned under the ROPS or the tractor

lOperate only in daylight or good artificial light

lEnsure the post hole digger is properly mounted, adjusted and in good

operating condition.

lEnsure that all safety shielding and safety signs are properly installed

and in good condition.

STARTING AND STOPPING SAFETY

lCheck the tractor master shield over the PTO stub shaft. Make sure it

is in good condition and fastened securely to the tractor. Purchase a

new shield if old shield is damaged or missing.

lAll tractors that are not equipped with a “live” power take off (PTO)

need to be equipped with an over running PTO clutch. These are

available through most farm equipment stores.

NOTE : The addition of an over running PTO clutch may change the

length of the PTO driveline required. Pay extra attention to the

instructions on the PTO driveline Installation. Be sure that the

driveline system guarding is adequate.

lThe post hole digger operating power is supplied from tractor PTO.

Refer to your tractor manual for PTO engagement and disengagement

instructions. Know how to stop tractor and post hole digger quickly in

case of an emergency.

OPERATIONAL SAFETY

lThe use of this equipment is subject to certain hazards that cannot be

Protected against by the mechanical means or Product design . All

operators of this equipment must read and understand this entire

manual, paying particular attention to safety and operating instructions,

prior to using. If there is something in this manual you do not

understand, ask your supervisor, or your dealer, to explain it to you.

lMost accidents occur because of neglect or carelessness. Keep all

helpers and bystanders at least several feet from an operating post hole

digger. Only properly trained people should operate this machine.

lWhen machine is operated in populated area operation must be

stopped when anyone comes within 25 feet.

lThe majority of the accidents involve entanglement on the driveline

and operators being knocked off the tractor by low hanging limbs.

Accidents are most likely to occur with machines that are loaned or

rented to someone who has not read the owner's manual and is not

famillar with a post hole digger and or tractor..

lThe post hole digger is designed for use only on tractors with

540-RPM power take off.

lInstall and secure all guards and shields before starting or operating.

The driveline guards and tractor，shields should be used and

maintained in good working condition. They should be inspected

carefully, at least dally, for missing or broken cable, chain links，

shields , or guards. (Worn Items must be replaced at once to reduce

possibility of Injury).

lDisengage power takeoff (PTO) and place transmission in neutral

before attempting to start engine.

lMany varied objects, such as wire, cable, rope, or chains, can become

entangled in the operating parts of the digger. These items could then

swing at great velocities. Such a situation is extremely hazardous.

Inspect t he area for such objects before digging. Remove any like

objects from the site.

lNever allow the auger to contact such items . Never assume an area is

clear，Always Check !

lAlways stop the tractor, disengage PTO, set brake, shut off the tractor

engine, remove the ignition key, lower implement to the ground and

allow auger to come to a complete stop before dismounting tractor.

Never leave equipment unattended with the tractor running.

lNever place hands or feet close to post hole digger with tractor engine

running or before you are sure all motion has stopped. Stay clear of all

moving parts.

lDo not reach or place any part of your body close to equipment until it

is blocked securely.

lDo not allow riders on the tractor at anytime. There is no safe place

for any riders.

lDo not operate unless all personnel, livestock, and pets are several feet

away to prevent injury.

lThe rotating parts of this machine have been designed and tested for

rugged use. However, they could fail upon impact with heavy, solid

objects such as steel guardrails and concrete abutment. Such impact

could cause the broken objects to be thrown outward. To reduce the

possibility of property damage , serious injury，or even death, never

allow the auger to contact such obstacles.

lStop the post hole digger and tractor immediately upon striking an

obstruction. Turn engine off，remove key, inspect and repair any

damage before resuming operation.

lStay alert for uneven terrain, rocks, and roots and other hidden

hazards. Keep away from drop-offs and hazards that could cause roll

over. Use extreme care and maintain minimum ground speed when

transporting or operating on hillsides, over rough ground and when

operating close to ditches or fences . Be careful and slow down when

turning sharp corners and changing direction on slopes. Do not start or

stop suddenly on slopes. Avoid operation on steep slopes. In

extremely uneven terrain，rear wheels weights, front tractor weight,

and/or tire ballast should be used to improve stability.

lAlways check tractor manual for proper use on stopes.

lWhen using a unit , a minimum 20% of tractor and equipment weight

must be on tractor front wheels. Without this weight , tractor could tip

over, causing personal injury or death. The weight may be attained

with a frontend loader , front wheel weight , ballast in the tires or

front tractor weights. When attaining a minimum 20% of tractor and

equipment weight on the front wheel , you must not exceed the ROPS

weight certification. Weight the tractor and equipment. Do not guess

or estimate!

TRANSPORT SAFETY

lComply with state and local laws governing highway safety and

movement of farm machinery on public roads.

lThe use of flashing amber lights is acceptable in most localities.

However , some localities prohibit their use. Local laws should be

checked for all lighting and marking requirements.

lAt all times, when driving the tractor and equipment in the road or

highway under 20mph(32kph) use flashing amber warning lights and

a slow moving vehicle (SMV) identification emblem . Do not exceed

20 mph(32kph). Reduce speed on rough roads and surfaces.

lPlan your route to avoid heavy traffic.

Inhaltsverzeichnis

Andere TOPMAQ Baumaschinen Handbücher

TOPMAQ

TOPMAQ HHW-2D Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung