Toro REELMASTER 6500 D Bedienungsanleitung

Page 1 of 258

QUICK SERVICE REFERENCE

Version 12, March, 2010

Page 2 of 258

This book is intended to provide easy reference to information most commonly

accessed. Every effort has been made to assure the information provided in this book

is up to date. The most current version of this book can be found on www.toro.com.

Look at revision date on cover page for current version and compare to the version on

website

Part numbers are provided for your convenience, but number changes are common.

Toro part number changes are usually reflected on shipping invoices. However, non-

Toro part number changes (Kohler, B&S, etc.) may occur without notification. Refer to

the proper parts catalog prior to ordering to assure accuracy.

To make this book a desk reference, print it (or only the desired pages), Use a

standard 3 hole punch, and put them into a 1 inch thick 3-ring binder ( 8.5 X 11).

All oils mentioned in this guide are based on Toro engineering specifications. Please

refer to your equipment’s Operators Manual for acceptable substitutes (if any). You

may also refer to Toro’s website for Service Bulletins regarding the use of

Biodegradable oils (listed under General Topics).

The “Charts” indicated for many of the oil listings provide viscosity ratings for different

operating temperatures. All charts are listed in the back of this book (pages 244-254).

All traction units have grease fittings that must be lubricated regularly with No.2

General Purpose Lithium-based grease. If machinery is operated under severe

conditions, lubricate all bearings and bushings more often than normal

recommendations.

IMPORTANT NOTES:

Part numbers, specifications, and lubricants listed herein are subject to change without

notice. Refer to Toro Master Parts Viewer on the internet at www.toro.com for free

online Toro parts catalogs. The current version of this document may be found at

Toro’s Golf or Grounds area of the website under the Education and Technical

Reference section of the Toro Customer Care page.

The most current API Service Grade of oil includes the service properties of earlier

classifications. Refer to the API Motor Oil Guide at the back of this book for detailed

information on motor oils.

Page 3 of 258

Table of Contents

Serial Number Locations ...................................................6-9

Reelmaster®........................................................................10-55

Greensmaster®...................................................................56-91

Groundsmaster® ................................................................92-151

Workman® Mid Duty ..........................................................152-165

Workman® Heavy Duty......................................................166-187

Aerators...............................................................................188-205

ProCore® Processor..........................................................206-207

4800 Turf Sweeper .............................................................208-209

Rake-O-Vac®.......................................................................210-211

Pro Force™ Debris Blower................................................212-213

Sand Pro® ...........................................................................214-217

Line Pro®.............................................................................218-219

Multi Pro®............................................................................220-229

Foam Marker Kits ...............................................................230-233

Top Dressers, ProPass, Material Handlers......................234-243

Engine Oil Viscosity Charts ..............................................244-249

Hydraulic Oil Viscosity Charts..........................................250

Hydraulic Oil Standards Charts ........................................251-254

Toro Oil Chart .....................................................................255

API Motor Oil Guide............................................................256-258

Page 4 of 258

Notes

Version 2 changes: Pages 48 & 50; Toro part numbers provided for Air and Fuel

Filters. dated 08/2002

Version 3 changes: Pages 2, 9, 27& 34; Peugeot engine

coolant has changed. The part number has changed from

(93-7213) to (104-8606). dated 03/2010

Version 4 changes: Page 35; Incorrect part number for oil filter on GM 345.

The correct number is FL-100-A. dated 03/2010

Version 4 changes: Page 41; Workman 1100 tire pressure range change.

dated 03/2010

Version 5 changes: All 2003 updates - dated 01/2003

Version 6 changes: All 2004 updates - dated 07/2004

Version 7 changes: All 2005 updates - dated 02/2005

Version 8 changes: All 2006 updates

Version 9 changes: All 2007 updates - includes increased

oil change intervals newer units.

Version 10 changes: All 2008 updates - includes Toro oil

part numbers at the end of the book.

Version 11 changes: All 2009 updates - includes Toro serial number locations.

Version 12 changes: All 2010 updates –dated 02/2010

Page 5 of 258

Important Information on Consumable Items

The normal operating environment of Toro machines can be categorized as off road-

severe duty. In order for equipment to provide continuous service in this type of

environment, regular cleaning and scheduled maintenance must be performed.

Components are designed to provide durability with a minimum amount of

maintenance. Maintenance schedules are developed for each product in an effort to

reduce unexpected failures and down-time. However, components that have constant

contact with the turf environment (i.e. reels, bedknives, blades, rollers, caster wheels,

etc.) are subject to a wide variety of detrimental influences that can accelerate the

need for maintenance and/or repair prior to the recommended schedules. Because of

this, these components (greaseable and non-greaseable) may require additional

repairs as part of maintenance, and should be considered “consumable” items.

For additional information on consumable items, refer to the Toro General Commercial

Products Warranty statement on the rear cover of the Operator’s Manuals or at

www.toro.com.

Page 6 of 258

FINDING YOUR PRODUCT'S MODEL AND SERIAL NUMBER

This is a picture of a Toro model and serial

number plate. You should be able to find

a model and serial number plate that looks

similar to this one on your type of

machine.

Review the sample images below to help

identify the location of the model and serial

number plate on your machine.

Due to the various product configurations

these plates may be placed in a somewhat

protected area (not readily visible). Most

plates will be attached to a main frame

member.

Product Type: Walk-behind

Mowers/Product

How to find the model and serial

number plate:

Look between the wheels on top of the

frame on the back of the machine.

Page 7 of 258

Product Type: Riding Greeensmowers

How to find the model and serial

number plate:

Locations vary on these machines based

on vintage. Check under the seat area or

on the main frame just above the rear

steer wheel, or on the right-hand frame

member near the wheel brake and

somewhat behind and below the driver's

right foot.

Product Type: Workman Vehicles

How to find the model and serial

number plate:

These plates are under the

dashboard area and may be in the

center (as shown) or on either the

right or left-hand side.

Product Type: Multi Pro Sprayers

How to find the model and serial

number plate:

Look for the plate on the left-hand

side of the operator's compartment

(near the driver's left knee area) or

on the chassis near the battery on

the left side.

Page 8 of 258

Product Type: Groundsmasters

and Reelmasters

How to find the model and serial

number plate:

Placement varies based on model.

Look first in the area directly behind

the operator's left knee, on the

firewall.

Another location is on the front

frame extension to the left of the

driver's feet.

Product Type: Other Non-Riding

Product

How to find the model and serial

number plate:

Look on the main frame structure in

and open, yet damage-protected

area.

The ProForce Blower is shown.

Page 9 of 258

The ProCore 648 Aerator is shown.

Page 10 of 258

QUICK SERVICE REFERENCE

REELMASTERa6500 D / 6700 D

(2 & 4 WHEEL DRIVE)

Model 03806 thru 03808 Serial 210000001- 240999999

Engine Brand .......................................... Kubota

Engine Oil (Chart A)................................ SAE 10W30 CI, CI4

Engine Oil Filter...................................... 108-3841

Breather Element.................................... 98-9493

Hydraulic Oil (Chart R) ........................... ISO VG 46

Hydraulic Filter ....................................... 94-2621

Air Filter................................................... 108-3812

Safety Air Filter....................................... 108-3813

Water Separator...................................... 98-9764

Filter Fuel*............................................... 99-8358 (2001-2002)

Filter In-line Fuel* ................................... 98-7612 (2003-2007)

Planetary Gear Drive .............................. SAE 85W140

Rear Axle Oil ........................................... SAE 80W90

Tire Pressure........................................... 15 –20 PSI

(Front & Rear)

Engine Coolant ....................................... Ethylene Glycol, Water

(50/50 mix)

*Refer to Toro’s parts manual or Parts Viewer for Bio-Diesel fuel filter part numbers.

IMPORTANT NOTES:

Part numbers, specifications, and lubricants listed herein are subject to change. Refer

to Toro’s Master Parts Viewer on the internet at www.toro.com for online Toro parts

catalogs. The current version of this document may be found at that website under

Technical Reference section of the Toro Customer Care page. The most current API

Service Grade of oil includes the service properties of earlier classifications. Refer to

the API Motor Oil Guide at the back of this book for further details.

Andere Handbücher für REELMASTER 6500 D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toro Rasenmäher Handbücher

Toro

Toro 74256 Bedienungsanleitung

Toro

Toro Groundsmaster 220-D Bedienungsanleitung

Toro

Toro 22162 Bedienungsanleitung

Toro

Toro 20079 Bedienungsanleitung

Toro

Toro 74405 Bedienungsanleitung

Toro

Toro 20380 Bedienungsanleitung

Toro

Toro Groundmaster 31902 Bedienungsanleitung

Toro

Toro Titan 75303 Bedienungsanleitung

Toro

Toro 14AP80RP544 Bedienungsanleitung

Toro

Toro Titan ZX4875 Bedienungsanleitung

Toro

Toro Recycler 21321 Bedienungsanleitung

Toro

Toro 30071 Bedienungsanleitung

Toro

Toro 74920 TITAN ZX4820 Bedienungsanleitung

Toro

Toro TimeCutter Series Handbuch

Toro

Toro LT-F3000 Bedienungsanleitung

Toro

Toro 30241 Groundsmaster 228-D Bedienungsanleitung

Toro

Toro 20323 Bedienungsanleitung

Toro

Toro TimeCutter HD ZX5400 Handbuch

Toro

Toro 22293 Bedienungsanleitung

Toro

Toro 414500000 Bedienungsanleitung

Toro

Toro 21462 Bedienungsanleitung

Toro

Toro 2000 Series Bedienungsanleitung

Toro

Toro 74179 Bedienungsanleitung

Toro

Toro 74057 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung