Toro TM5490 Bedienungsanleitung

Part No. 111-3933 Rev A

TM5490 and 7490

Trailed Gang Mower

Model No: 02700-Serial No. from 311000001

Model No: 02701-Serial No. from 311000001

Operator’s Manual

Original Instructions (EN)

Date: 30.11.10

ATTENTION

THIS SYMBOL MEANS

BE ALERT!

YOUR SAFETY IS INVOLVED

READ THIS MANUAL BEFORE USING THE TM5490 AND TM7490

MOWERS.

IT IS ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR

OWN SAFETY.

ALL OPERATORS SHOULD SEEK AND OBTAIN PROFESSIONAL AND

PRACTICAL INSTRUCTIONS ON THE SAFE USE OF THE MOWER.

THESE SERVICES ARE AVAILABLE THROUGH TORO

OR TORO AUTHORISED COMMERCIAL DEALERS.

1.5 1.5

CONTENTS

CONTENTS Page No.

SAFETY PRECAUTIONS 1.7 - 1.16

Training 1.7

Preparation 1.8 - 1.9

Operation 1.9 - 1.10

Slopes 1.10

Handling and Storage of Fluids 1.11

Maintenance and Storage 1.11 - 1.12

Transport Speed 1.12

Decals 1.13 - 1.16

EC CONFORMITY INFORMATION 1.17

Noise Levels 1.17

EC Declaration of Conformity 1.17

INTRODUCTION 1.18

SPECIFICATIONS 1.19 - 1.22

Hydraulic System 1.19

Recommended Lubricants and Hydraulic Fluids 1.19

P.T.O. Gearbox 1.19

Cutterhead Drive System 1.20

Cutterhead Lift System 1.20

Tractor 1.20

Running Gear 1.21

Cutterheads 1.21

Weight and dimensions 1.22

TM5490 Delivery Check List 1.23

TM5490 General Assembly MK3 Cutterheads 1.24

ASSEMBLING THE MOWER - TM5490 1.25 - 1.26

TM7490 Delivery Check List 1.27

TM7490 General Assembly MK3 Cutterheads 1.28

ASSEMBLING THE MOWER - TM7490 1.29 - 1.32

COMMISSIONING THE MOWER 1.33 - 1.38

PREPARING THE MOWER 1.39 - 1.40

ATTACHING THE MOWER TO THE TRACTOR 1.41 - 1.44

DISCONNECTING THE MOWER FROM THE TRACTOR 1.45 - 1.46

OPERATING THE MOWER 1.46 - 1.58

Safety 1.46

Cutterhead Position Controls 1.47

Cutterhead Position Controls (Electrical Control) 1.48

Cutterhead Drive Direction Control (Electrical Control) 1.49 - 1.51

Cutterhead Setup 1.51

Mower Brakes 1.51

General 1.52 - 1.53

Unblocking the Cutting Cylinders 1.54

1.6 1.6

CONTENTS

CONTENTS Page No.

Cutterhead General Information 1.55

MK3 200mm (8”) Fixed Cutterhead 1.56

MK3 254mm (10”) Fixed Cutterhead 1.56

Hour Meter 1.56

General Operating Hints 1.57 - 1.58

MAINTENANCE 1.59 - 1.72

Maintenance 1.59 - 1.60

Running in Period (Includes grease points for both mowers) 1.61 - 1.62

Daily and Before Use 1.63 - 1.64

Every 50 Hours 1.64 - 1.65

Every 250 Hours 1.65 - 1.66

Every 500 Hours 1.66 - 1.67

End of Season / Winter Storage 1.67

Cutterhead Cylinder to Bottom Blade Adjustment 1.68 - 1.69

Cutterhead Back Lapping 1.70 - 1.71

Grinding 1.71

Bottom Blade Replacement 1.71 - 1.72

GRASS CUTTING FAULTS 1.73 - 1.74

TROUBLE SHOOTING 1.75 - 1.77

CONNECTION DIAGRAM 1.78

TM5490 HYDRAULIC CIRCUIT DIAGRAM / PARTS LIST 1.79 - 1.80

TM5490 ELECTRIC HYDRAULIC CIRCUIT DIAGRAM / PARTS

LIST 1.81 - 1.82

TM7490 HYDRAULIC CIRCUIT DIAGRAM / PARTS LIST 1.83 - 1.84

TM7490 ELECTRIC HYDRAULIC CIRCUIT DIAGRAM / PARTS

LIST 1.85 - 1.86

TM5490 AND TM7490 ELECTRICAL CIRCUIT DIAGRAMS /

PARTS LIST

1.87 - 1.88

WARRANTY 1.89

NOTES 1.90 - 1.92

CUSTOMER INFORMATION 1.93 - 1.94

1.7 1.7

Training

Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. Learn how

to stop the mower quickly in an emergency.

Never allow children or people unfamiliar with these instructions to use the mower. Local regulations may

restrict the age of the operator.

Never mow while people, especially children, or pets are nearby.

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or

their property.

Do not carry passengers.

All drivers should seek and obtain professional and practical instruction. Such instruction should

emphasise:

The need for care and concentration when working with this machine.

The need to slow down when making tight turning manoeuvres. Failure to take adequate care can affect

stability leading to loss of control of the machine particularly when operating in transport mode.

Control of the trailed mower sliding on a slope will not be regained by application of the brakes.

The main reasons for loss of control are:

- Insufcient wheel grip.

- Being driven too fast.

- Inadequate braking.

- The type of machine is unsuitable for the task.

- Lack of awareness of the effect of ground conditions, especially slopes.

- Incorrect hitching and load distribution.

Never attempt to disconnect any part of the hydraulic system before de-pressurisation. This may be achieved

by lowering all cutterheads to the ground, turning off the tractor engine and disconnecting the PTO shaft.

READ THIS MANUAL BEFORE USING THE TRAILED GANG MOWER, IT IS

ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR OWN SAFETY.

THE FOLLOWING PRECAUTIONS MUST BE TAKEN TO HELP PREVENT

ACCIDENTS. A CAREFUL OPERATOR WHO USES COMMON SENSE IS THE

SAFEST OPERATOR.

SAFETY PRECAUTIONS

1.8 1.8

Preparation

Check that the machine complies with all applicable regulations, including those in force when used on the

public highway. Check that the lights are in full working order and function correctly from the tractor.

While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when

barefoot or wearing open sandals. Eye protection should be worn.

Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown

by the machine.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or

damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

Ensure that the cutterheads are fully raised with the transport latches and safety locks engaged in position, and

that the PTO drive is disengaged and correctly stowed when disconnected before transporting the mower.

When transporting the mower with the PTO shaft assembly disconnected from the tractor PTO drive, the PTO

shaft assembly must be stowed securely to the mower chassis or tractor.

Check that the PTO shaft is fully engaged to the drive, driven shafts and that the guard safety chains are

secure.

Check the condition of the tyres and ensure that they are inated to the correct pressures, refer to

SPECIFICATIONS. This is particularly important if the machine is to be taken on the public highway.

Check that the mower is in good working order, paying particular attention to the brakes, drawbar, tyres and

lights. Check that all safety guards are in position and that the tractor complies with all applicable regulations

including those in force when used on a public highway.

Ensure that the automatic breakaway cable is secured correctly between the tractor and the machine brake

operating system.

Replace a broken, frayed or damaged breakaway cable.

Ensure that the parking brake operates correctly through its full travel without interference.

Ensure that the brakes are kept clean and adjusted regularly.

Ensure that the brake coupling mechanism is mounted securely in position, is correctly adjusted and

maintained, and operates through its full working travel without interference.

Replace the towing unit if the sliding mechanism or towing eye is excessively worn.

In the event of a breakaway cable being activated ensure that there is no interference on the brake coupling

mechanism.

Replace damaged or worn brake coupling mechanism components with the correct Toro service parts.

Never make an unauthorised modication to any part of the machine or brake coupling mechanism.

Ensure that the hydraulic brake actuating system operates through its full working travel without interference.

SAFETY PRECAUTIONS

1.9 1.9

Preparation continued

Check the mower hydraulic system, particularly the hydraulic hoses, ttings and hose supports. Worn,

crushed or damaged hoses can burst, with risks to health and damage to the machine and surrounding turf

areas.

After refuelling and adding oil to the hydraulic oil tank ensure that the caps are replaced securely.

Check that all linkages, connections and pivot nuts are secure and that wheel nuts are torqued correctly,

refer to SPECIFICATIONS.

Electric lift only:

Check the mower electrical system, particularly the condition of the umbilical cable and electrical connec-

tions between the tractor and the mower. Ensure that the system is in full working order and that the electrical

emergency stop system is fully operational.

Operation

Do not operate the engine in a conned space where dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good articial light.

Never start the tractor engine with the PTO engaged.

Stored energy devices are charged when the outer wing units are in transport position. Always operate the

relevant lift controls to provide hydraulic support for the wing units suspensions before attempting to release

the transport latches.

Use care when towing:

- Use only approved drawbar hitch points.

- Do not turn sharply.

- Use extreme caution when reversing.

Watch out for trafc when crossing or near roadways.

Disengage the cutterhead drive system before crossing surfaces other than grass.

When using the machine, never direct discharge of material towards bystanders or allow anyone near the

machine while in operation.

Never operate the mower with defective guards, shields or without safety protective devices in place and in

good working order.

Take care whilst manoeuvring in tight turns n forward and reverse gear to avoid contact between the mower

and the tractor.

SAFETY PRECAUTIONS

1.10 1.10

Operation continued

Disengage the PTO drive, change into neutral, set the tractor parking brake, stop the engine and remove

ignition key. Block the mower suddenly and operate the mower handbrake before performing any service or

maintenance procedure:

- Before releasing blockages.

- Before checking, cleaning or working on the mower.

- After striking a foreign object. Inspect the mower for damage and make repairs before restarting and

operating the equipment.

- If the machine starts to vibrate abnormally (check immediately).

- Before refuelling.

- Before making cutterhead adjustments.

- Before disconnecting the machine and the PTO from the tractor.

Always disengage the PTO drive when transporting or not in use.

Never work on the mower when the tractor engine is running.

Always keep feet and hands well away from the cutting cylinders when making adjustments.

Slopes

Do not use on a slope of more than 15 degrees when in use or 10 degrees with cutterheads raised. Care should

be taken when using the mower on any slope where ground conditions are such that there may be a risk of the

mower rolling over. The requirements of 89/355/EEC, as amended by 95/63/EEC ‘Provision and Use of Work

Equipment Directive’ should be considered.

Stability angles given are maximum gures for a machine and are for guidance only. Particular conditions

such as wet grass or uneven ground may not permit safe operation on the slope limits stated.

The slope angle may be reduced if the stability angle of the towing tractor is less than that of the mower.

Ground conditions affect traction. Particular conditions may not permit safe operation on the slope limit

stated. Remember there is no such thing as a ‘safe’ slope. Travel on grass slopes requires particular care. To

guard against overturning or loss of traction when travelling or mowing on a slope:

- Exercise extreme care when changing direction on a slope.

- Do not stop or start suddenly.

- Engage clutch slowly. Always keep the tractor in gear, especially when travelling downhill.

- Keep machine speed low.

- Avoid tight turns.

- Stay alert for humps, hollows and other hidden hazards.

- Keep away from sharp inclines and steep drops.

- A thorough risk assessment should be carried out by a competent person before travelling or mowing on a

slope.

- Never park on a slope.

SAFETY PRECAUTIONS

Ground Level

15 Degree Slope

10 Degree Slope

Fig 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toro Rasenmäher Handbücher

Toro

Toro REELMASTER 6500 D Bedienungsanleitung

Toro

Toro 3670 Bedienungsanleitung

Toro

Toro 74784 Bedienungsanleitung

Toro

Toro 03606A Bedienungsanleitung

Toro

Toro 20340 Bedienungsanleitung

Toro

Toro TimeCutter SW 4200 Bedienungsanleitung

Toro

Toro 75750W Bedienungsanleitung

Toro

Toro Groundmaster 31902 Bedienungsanleitung

Toro

Toro 21753 Bedienungsanleitung

Toro

Toro Proline 30138 Bedienungsanleitung

Toro

Toro 22177TE Bedienungsanleitung

Toro

Toro 74057 Bedienungsanleitung

Toro

Toro 30484 Bedienungsanleitung

Toro

Toro GrandStand Revolution Handbuch

Toro

Toro 04052TE Bedienungsanleitung

Toro

Toro 74952 Bedienungsanleitung

Toro

Toro Greensmaster eFlex 1800 Bedienungsanleitung

Toro

Toro TimeCutter Z4235 Bedienungsanleitung

Toro

Toro 139-6623 Bedienungsanleitung

Toro

Toro TimeCutter MX 3450 74750 Bedienungsanleitung

Toro

Toro Recycler 20074A Bedienungsanleitung

Toro

Toro TimeCutter SS 4260 Bedienungsanleitung

Toro

Toro Super Recycler 20057 Bedienungsanleitung

Toro

Toro Z Master 74919TE Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 050 thru 062 Bedienungsanleitung