Torrey EQB-50/100 Bedienungsanleitung
OWNER`S MANUAL
ELECTRONIC SCALE
REV 0 CODE: 13100906
BEFORE OPERATING THIS SCALE, PLEASE READ THIS MANUAL THOROUGHLY.
FS, EQB and EQM
Series
Important warnings.
Introduction.
Installation guide.
Keyboard.
General view finder.
Operations description.
How to weigh a product.
How to use the TARE key.
How to use kg/lb convertion key.
How to use the ZERO key.
Use of the battery.
Counters verification function.
Important messages that appear
on the scale.
Maintenance and cleaning.
Troubleshooting guide.
Technical specifications of EQB50/100,
EQB100/200 and FS200/400.
Technical specifications of FS250/500 and
FS500/1000.
Technical specifications of EQM200/400
and EQM400/800.
Technical specifications of
EQM1000/1000.
Additional data.
3
5
5
6
7
8
8
8
9
9
10
11
12
13
14
15
16
17
18
19
2FS, EQB and EQM Series
INDEX
IMPORTANT WARNINGS
Shipping / receiving scale
1. In case have problema wiht the scale,
firts read the warranty condiction.
2. Do not open the scale on your own.
Your warranty will be canceled.
3. Never prees the keyboard wiht object
such as pencils, pens, knifes, etc.
4. Use a Vac outlet exclusive for the
scale. Avoiding overload or voltaje
variations.
5. Never wash the scale using a flow of
wáter. This can damage the electronic
components. For more information read
“Maintenance and cleaning”section.
6. Protect the scale from insects (mainly
from roaches), they can seriously
damage to electronic components. Use
solid products againts roaches.
7. Do not drop or hit the scale wiht nthe
product to be weighted because as time
goes by it will damage the weight
sensor.
3
8. Do not use solvents or detergents for
cleaning only use damp rage.
9. Do not place fans or heaters directed
towards the scale.
10. Do not place the scale where there is a lot of
moisture and/or dust.
11. Only autorized and qualified personnel should
check and repair your scale.
IMPORTANT WARNINGS
4FS, EQB and EQM Series
WARNING!
Do not open the scale
Caution: to reduce the risk of short circuit in your
scale, do not remove the cover or sustitute any of
the parts for others that are not original only
authorized distributor..
Battery should be recharged for 10Hrs before
using the scale for the first time.
IMPORTANT!
Dear customer:
We appreciate that you have chosen this product. We assure you that you
will get the máximum satisfaction of the new acquisition for your business.
We suggest you to read carefully this manual and make sure to keep it at
hand for later consultations.
INSTALLATION GUIDE
INTRODUCTION
1. Unpacking the scale and verify that it is not damaged. If there some hurt
on the scale notify it to your authorized distributor.
2. Set the scale in a free movement and vibrations place. Verify that it is
right leved.
3. Connect the source adapter to Vac outlet.of 110VCA/220VCA, (if it is
necesary).
4. Turn on the scale and the Generald view finder shows:
5
IMPORTANT NOTE:If when doing the steps describe so far the scale
shows word “HELP” means that it was hurted and/or hited while it was
transported with causes on it a irreversible damage.
Shipping / receiving scale
KEYBOARD
When you press it you eliminate any containers weight that you
do not wish to considere during a trade. (example: boxes, bags,
bottkes, etc).
When you press it the scale starts with zero weight.
It is use to send information to a printer (optional).
When you press this key you change the units of the scale from
kilograms to pounds and vice versa.
This key is used to turn on and turn off the backlight.
When you press it the scale turn off.
When you press it the scale turn on.
6FS, EQB and EQM Series
1. “Alphanumeric" indicator: shows the product's weight in pounds and kilograms
when this happens, the symbol "kg" or "lb"appears in the indicator (1).
Alphanumeric indicator can show the following readings:
“Kg” or “lb”is shown when the scale is ready to weight products.
OVRLOAd is shown when there is an overweight on the scale.
NEG. is shown when there is a negative weight.
LOWbAT is shown when the battery does not have enough energy.
HELP is shown when you turn on the scale with an excessive weight.
UNLOAd is shown when the scale is turned on without the plate.
2. “Low battery" indicator: is shown when the energy of the battery is too low.
This indicator turns on to tell us that it is necessary to recharge it.
3. “Zero” indicator: these references to zero indicate that the scale is ready to
start weighting products. the zero indicator disappears when a load is placed
on the scale.
4. “NET” indicator: indicates that the "tare" function has been activated. the
readings shown correspond to the net weight.
5. “AC/DC Power supply”indicator: when the ac/dc power supply is connected
to the scale this indicator turns on.
GENERALD VIEW FINDER
7
1
234
5
Shipping / receiving scale
OPERATION’S DESCRIPTION
Turn your scale on pressing the key. The general view finder will show
“------“for few seconds. Then the general view finder will be in “zeros”.At
this moment the scale is ready to weight. Then place the product to weight
on the plate and you will see the weight in the alphanumeric indicator. The
“kg” o“lb”symbol will appear in the indicator. For example, if you place a
product whose weight is 160 pounds, you will see the following:
When you wish to weight a product in a container and you do not want to
consider the container´s weight during the operation, you can use the “TARE”
function. To use this function, follow these steps: suppose you are going to
weight 10 pounds of some product in a container that weight 20 pounds.
1. Place the empty container on the scale:
2. Press the key. After some seconds the view
finder will display:
3. Put the product inside the container and the
scale shows only the weight of the product
without the container's weight. notice that when
you remove the container a negative number
(weight of container) appears in the general view
finder.
It is important to mention that this function is subtractive, for example if we
have a container that weight up to 20 pounds, the scale will only be able to
weight up to 120 pounds of product to complete the maximum capacity (to
EQB100/200). To cancel the tare function remove the container and press
the key, the scale will return to the normal function. The “NET” symbol
will disappear.
How to weight a product
How to use
8FS, EQB and EQM Series
It is possible for the scale to show a number in the view
finder without having any product on the plate due to
voltage variations, rough handling or some other factor.
when this happens, simply press the key and the
view finder will return to “zero”.the indicator “zero” will
appear in the view finder. this operation is commonly
known as resetting to zero.
The following observations are specially important:
a) When there is no weight on the scale (container) you can not activate
the “TARE” function.
b) When a container is “tared”, but when you remove it from the plate and
you remove a larger weight than the container (grease, remaining of
product, etc.) or when the plate is slightly lifted the message “NEG”
(negative) will appear.
When this happens :
a) Release the plate if you are holding it.
b) If the alarm continues, turn off the scale and turn
it on again.
If the scale is in the “lb” mode and you put on the
scale a product that weights 160 pounds you will see
the following in the view finder:
But if you press the key the scale will change to
“kg” mode and you will see the following in the view
finder.
When you do not have enough light you can use the backlight to improve
the readability of the data on display. to turn on and turn off the backlight
just press the key.
How to use
Note: If you turn off the scale and it was in the “kg” mode, and you turn on
the scale again it will return in the “kg” mode.
How to use
How to use
9
Shipping / receiving scale
This function is permanently activated when the scale is on and only when
you do not have the ac/dc power supply connected to the scale. When you
do not use the scale for a period of time approximate to 15 minutes, it will
automatically turn off. To turn on the scale again, just press the key. The
power off timer function permit you to save electricity and avoid constant
battery recharge.
The scale can operate with an ac/dc power supply, or with battery (4 Volts
included). The battery is rechargeable using the ac/dc power supply and the
procedure is the following:
Recharge: to make this operation, just connect the scale to ac/dc power
supply for a period of time approximate to 10 hours with the scale turned
off, when you recharge the battery for some hours, but the battery can not
get enough charge to turn on the scale, then you must change the battery
by a new one. In this case you can contact to your authorized distributor.
The charge capacity of the rechargeable battery in this scale decreases
according, to the number of charge/discharge cycles, this causes that the
service life is reduced to 1000 cycles. for this reason the warranty period for
the battery is limited to six months after the purchase date of the scale.
Use of the battery
If the battery does not have enough energy to keep
the scale operating for a long time, a low battery
indicator appears in the view finder. This is the first
warning signal indicating that it is necessary to
recharge the battery.
Even with this signal, it is possible for the scale to
keep on operating for a short period of time
(30 minutes), but after a second warning signal
appears ("low bat") in the view finder, the scale stops
itself and does not respond to the instructions.
Low battery indicator
To eliminate any of the two indicators and continue using the scale without
any concern, connect the ac/dc power supply to the scale. and remember to
recharge the battery.
10 FS, EQB and EQM Series
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere Torrey Skala Handbücher
Torrey
Torrey L-EQ 5/10 Bedienungsanleitung
Torrey
Torrey LSQ Series Betriebsanleitung
Torrey
Torrey WLS SERIES Bedienungsanleitung
Torrey
Torrey QC Series Bedienungsanleitung
Torrey
Torrey L-EQ HS Series Bedienungsanleitung
Torrey
Torrey QC Series Bedienungsanleitung
Torrey
Torrey EQB Series Bedienungsanleitung
Torrey
Torrey PC HSP Series Bedienungsanleitung
Torrey
Torrey W-LABEL 40L Bedienungsanleitung
Torrey
Torrey L-PC SERIES Bedienungsanleitung
Torrey
Torrey LSQ Series Bedienungsanleitung
Torrey
Torrey CRS Series Bedienungsanleitung
Torrey
Torrey LPC HS Series Bedienungsanleitung
Torrey
Torrey CRS-HD 200 Bedienungsanleitung
Torrey
Torrey LSQ-40L Gebrauchsanweisung
Torrey
Torrey PC Series Bedienungsanleitung
Torrey
Torrey WLS Bedienungsanleitung
Torrey
Torrey PS Series Bedienungsanleitung
Torrey
Torrey W-LABEL Series Bedienungsanleitung
Torrey
Torrey FS 250/500 Bedienungsanleitung
