Torrey WLS Bedienungsanleitung

WLS Scale

WLS Network Installation Guide Rev. 1.0

Windows 7 / Windows 8

I. Requirements Network.

For optimum performance connect the computer with one Ethernet cable and

the Wifi scales into a distance not greater than 50 feet from the Access Point Router

Linksys E1200 (Torrey Part No. 11900171).

II. Equipment.

-WLS scale.

-Personal Computer with Windows 7 or Windows 8.

-2 Ethernet Network Cable, Category 5.

-Router Access Point Linksys E1200 (Torrey Part No. 11900171).

-Internet connection.

III. Access Point / Router Configuration.

This procedure was performed using an Access Point Linksys E1200 (Torrey Part

# 11900171) has not been previously configured and a personal computer with

network card configuration-DHCP Client. In case your personal computer or access

point has a different configuration, consult the person who made the configuration

before proceeding.

a) Connect the network cable to the PC at one of the Ethernet ports on the

router. If you have an Internet connecting a network cable to the Internet

port.

b) Connect the power supplier to the Router to turn it on.

c) Enter in your computer, the CD-ROM that came with your Linksys Router.

d) After reading the CD-ROM the following window appears, select the Install or

Run from media.

e) The Router Configuration program opens the next window, mark the

checkbox to accept terms and press Next button.

f) Check the connection is accorded to the below image and press the Next

button.

g) Make sure the connection is correct according to the image and press the

Next button.

h) Then the Router asked to define the name and password of your wireless

network. Set the parameters and press the Next button.

Router name (SSID): MyRouterWLS

Password: 12345678

i) The Router will start to configure the wireless network, follow the

instructions at the end to close the program.

Internet

IV. WLS Scale Wifi Connection.

This procedure was performed using a scale with WLS factory settings.

Perform the following steps directly on the screen of scale WLS.

a) In the home screen press the Menu button.

b) Select Settings.

c) The scale asks for the configuration password, the default password at

WLS scale with a factory setting is 123456.

d) Find the icon for Connectivity and push it.

e) Select the Wifi option.

f) Select the Enable Wireless option. The scale scans for available

networks to connect.

g) Select MyWLSRouter option.

h) The scale asks for the password of the network, type 12345678.

i) Select the Advanced option.

j) Set the following parameters.

Static IP Address

IP Address 192.168.1.51

Subnet Mask 255.255.255.0

Gateway 192.168.1.1

Press Save to save the changes and exit to return to the previous

window. Your WLS scale is ready to communicate over a Wifi connection.

V. WLS ADMIN Software.

Download the software from http://www.basculas-torrey.com/modelo-

wls.php. When it is installed follow the steps below.

a) Type at user Admin without password.

b) In the software menu selection Scales.

c) Select the option New Scale.

d) Enter a name for the scale.

e) Enter a description for the scale.

f) Set a connection type.

g) Enter a valid IP address 192.168.1.51 for the Scale.

h) Press the Connect button.

i) The scale must successfully respond.

j) Press the Save button.

k) The scale has been installed successfully. Repeat V step for all other

WLS scales that you want to connect to the PC.

For more information visit our website www.basculas-torrey.com or

contact Technical Support by phone (0181 ) 8198-1014.

Andere Torrey Skala Handbücher

Torrey

Torrey L-EQ 5/10 Bedienungsanleitung

Torrey

Torrey LSQ-40L Gebrauchsanweisung

Torrey

Torrey EQB-W Series Bedienungsanleitung

Torrey

Torrey LSQ Series Betriebsanleitung

Torrey

Torrey PS Series Bedienungsanleitung

Torrey

Torrey EQB-50/100 Bedienungsanleitung

Torrey

Torrey FS 250/500 Bedienungsanleitung

Torrey

Torrey CRS Series Bedienungsanleitung

Torrey

Torrey QC Series Bedienungsanleitung

Torrey

Torrey EQB Series Bedienungsanleitung

Torrey

Torrey W-LABEL Series Bedienungsanleitung

Torrey

Torrey PPC Series Bedienungsanleitung

Torrey

Torrey LSQ Series Bedienungsanleitung

Torrey

Torrey QC Series Bedienungsanleitung

Torrey

Torrey LSQ Series Bedienungsanleitung

Torrey

Torrey L-EQ HS Series Bedienungsanleitung

Torrey

Torrey PC Series Bedienungsanleitung

Torrey

Torrey W-LABEL 40L Bedienungsanleitung

Torrey

Torrey PC HSP Series Bedienungsanleitung

Torrey

Torrey CRS-HD 200 Bedienungsanleitung

Torrey

Torrey CRS Series Bedienungsanleitung

Torrey

Torrey WLS SERIES Bedienungsanleitung

Torrey

Torrey L-PC SERIES Bedienungsanleitung

Torrey

Torrey LPC HS Series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung