Toshiba BMS-SM1280HTLE Bedienungsanleitung

SMART MANAGER

Model name:

BMS-SM1280HTLE

Installation Manual

• Save These Instructions!

ENGLISH

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

2-EN

Contents

1 Precautions for Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Installation of the Smart Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 Connection of Power Cables/Earth Wires/Communication Cables . . . . . . . . . . . . . . 9

5 Switches for Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6 Central Control Address (Group Number) Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

7 Mode Setting for Smart Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

8 Zone Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

9 Changing Return-Back Time/Temperature Settings . . . . . . . . . . . . . . . . . . . . . . . . . 21

10 Test Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

• Thank you very much for purchasing this TOSHIBA Smart Manager.

• Please read this manual carefully beforehand for proper installation of the Smart Manager.

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

3-EN

1Precautions for Safety

• Read these “Precautions for Safety” carefully before installation.

• The precautions described below include important items regarding safety. Observe them without fail.

Understand the following details (indications and symbols) before reading the body text, and follow the

instructions.

• After the installation work has been completed, performa trial operation to check for any problems. Explain how

to use and maintain the unit to the customer.

• Ask customer to keep this Manual at accessible place for future reference.

Indication Meaning of Indication

Text set off in this manner indicates that failure to adhere to the directions in the warning could result in

serious bodily harm (*1) or loss of life if the product is handled improperly.

Text set off in this manner indicates that failure to adhere to the directions in the caution could result in

serious bodily injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other

injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-

term treatment as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Symbols Meaning of Symbols

“ ” Indicates prohibited items.

Theactual contentsof the prohibitionare indicatedbyapicture ortextplaced insideornext to thegraphic

symbol.

“ ” Indicates compulsory (mandatory) items.

The actual contents of the obligation indicated by a picture or text placed inside or next to the graphic

symbol.

•Ask an authorized dealer or qualified installation professional to install or reinstall this unit.

Inappropriate installation may result in electric shock or fire.

•Electrical work must be performed by a qualified electrician in accordance with this installation

manual.

The work must satisfy all local, national and international regulations.

Inappropriate work may result in electric shock or fire.

•Be sure to turn off all main power supply switches before starting any electrical work.

Failure to do so may result in electric shock.

• Do not modify the unit.

A fire or an electric shock may occur.

•Do not install this unit where flammable gas may leak.

If gas leaks and accumulates around the unit, it may cause a fire.

•Perform wiring correctly in accordance with specified the current capacity.

Failure to do so may result in short-circuiting, overheating or fire.

•Use predefined cable and connect them certainly. Keep the connecting terminal free from

external force.

It may cause an exothermic or a fire.

WARNING

CAUTION

WARNING

CAUTION

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

4-EN

Specifications

External Dimensions

Central Controller

Part name Central Controller Power Unit

Model name BMS-SM1280HTLE

Power supply Use bundled power unit. 220 - 240 VAC, 50/60 Hz

Power consumption 7W

Connectable

unit number

Indoor unit Up to 128 units

(Line1: Up to 64 units, Line2: Up to 64

units) —

Energy monitoring

interface Up to 4 units. —

Digital input/output

interface Up to 4 units —

Operating temperature / humidity 0 oC to 40 oC, 10 to 90 %RH (no condensation)

Dimension 120(H) x 180(W) x 64(D) mm 114(H) x 177(W) x 50(D) mm

Mass 0.8 kg 0.9 kg

180

120

140

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

5-EN

Power Unit

Before installation

Confirm all the parts on the list below are supplied.

Use the following materials to connect signal lines and power lines (procured on site)

Part name Part name Quantity Remarks

1 Central Controller 1

2 Power unit 1

3Installation Manual

Owner’s Manual

Network Configuration Guide 11 11 languages

English, French, German, Italian, Spanish, Portuguese,

Greek, Dutch, Russian, Turkish, Chinese.

4 CD-R 1

5 Clamp filter 1

6 Tie-wrap 1 For fixing the clamp filter

7Screws 84 for fixing the central controller

4 for fixing the power unit

8 Brackets 2 For combining the central controller and power unit.

9 Bracket screws 4 For combining the central controller and power unit

No Line Type/Wire size/Length

1 For TCC-LINK 2-core shield wire

1.25mm², 1000m max. (total length including

2.00mm², 2000m max. air conditioner area)

2 For RS-485 2-core shield wire

1.25mm², 500m max. (total length)

3For power

(220 - 240VAC) H05RN-F or 245IEC57

0.75mm², 50m max.

4 For digital Input/Output connection 2-core wire

0.3mm², 100m max.

5For power supply

(Between the power unit and central controller) 4-core wire

0.75mm², 20m max.

114

102

153

177

12 153 50

52.4

182.7

6-Ø5.5

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

6-EN

3Installation of the Smart Manager

CAUTION

• Do not twist communication wires and input/output wires with power wires or bundle them together with power wires

in a metal tube. Doing so may cause malfunction.

• Install the central controller away from a noise source.

Installing central controller

8.5 5Ø

8.5 155

142

172

17.9

12.7

106.6

108

Panel

Base

Central Controller box

Fix the panel by hooking the nails.

This hole is provided for penetration of the

Central Controller box fixing screw.

Insert a flat-blade screwdriver or the like into

the right and left grooves at the bottom of

the panel, and then carefully detach the

panel.

Dimensions of unit fixing holes in the wall, etc.

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

7-EN

Power Unit Installation Method and Orientation

There are five installation methods for this power unit as shown below: surface mount and wall mounts. Use the

attached screws.

REQUIREMENT

Do not install the unit in any of the following places.

• Humid or wet place

• Dusty place

• Place exposed to direct sunlight

• Place where there is a TV set or radio within one meter

• Place exposed to rain (outdoors, under eaves, etc.)

Installation Space and Maintenance Space

A side space for connecting through cable inlets and an upper space for maintenance

must be reserved before installation.

The other sides can be adjacent to surrounding objects.

No good

100mm

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

8-EN

Combining the Central Controller and Power Unit

You can combine the central controller and power unit using the supplied brackets as follows in order to control

them as one unit

Combination method

Power unit

Bracket

Panel

Fix the brackets and the

central controller box together

using the screws on the box.

Fix the power unit to the

brackets using the bracket screws.

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

9-EN

4Connection of Power Cables/Earth Wires/

Communication Cables

Connect power cables, communication cables, and earth wires to the specified terminals on the terminal block.

REQUIREMENT

Attach a round pressure terminal to the end of each wire except those for digital input and output.

123

TCC-LINK1 TCC-LINK2

RS-485

U1 U2 FG U1 U2 FG A B4

Power Supply Unit

DI1

DI2

DI3

COM

DO1

DO2

COM

WT 4321

Clamp filter

Client PC

LAN cable

The power terminals on the central

controller have polarity. Make sure

to connect the cables correctly.

Other wise failure will occur.

TCC-LINK U1 and U2

have no polarity.

The RS-485 signal wire has

polarity A and B. Be careful

when connecting the wire.

The TCC-LINK

communication cable

mustbeearthedon the

air conditioner. Do not

connecttheshieldwire

to the terminal block. It

should be open and

insulated.

central controller

power cable

Connectthe earthwire securelyto

the earth terminal on the unit.

Fix the cable

securely with the

clamp.

Power

cable

Power supply

220-240V AC

Connect the shield

wire of the RS-485

communication

cable to the FG

terminal.

RS-485

communication

cable

TCC-LINK communication

cable 2

TCC-LINK

communication

cable 1

Weekly timer

(sold separately)

Outdoor

Unit

Indoor Unit

Remote

controller

Outdoor

Unit

Indoor

Unit

Remote

controller

Connect to the

Energy Monitoring

relay Interface and

DigitalInput/Output

relay Interface

Functional

earth

Connect the functional earth terminal

with the earth near the central controller.

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Smart Manager Installation Manual

10-EN

REQUIREMENT

• Disconnect the appliance from the main power supply.

This appliance must be connected to the main power supply by a circuit breaker or switch with a contact

separation of at least 3mm.

• Fasten the screws to the terminal with torque of 0.5Nm.

Connections to External Equipment

Example of connection to external equipment which is connected to digital input/output connector.

Designation Input/

Output

item

Central Controller side External equipment side

Input/output

conditions Terminal name Example of circuit Input/output

conditions

DO1

(Alarm output)

DO2

(Run output)

DO-COM

(Output

common)

Status

output

Allowable

terminal

voltage/current

DC24V/35mA

Wiring length:

100 m or less

DI1

(All stop input)

DI2

(All start input)

DI3

(Fire alarm

input)

DI-COM

(Input

common)

Control

input

Non-voltage A

contacts

Pulse or static

* Non voltage

contacts must

be compatible

with minimal

current.

DC5V/3mA

Pulse width:

300 ms or more

Wiring length:

100 m or less

35 6

Length of stripped power cable Length of stripped TCC-LINK

communication cable Length of stripped digital Input/

Output communication wire

Attach the supplied clamp filter to the LAN cable.

* Wind the LAN cable around the clamp filter as shown

below when attaching the filter to the cable. After

attaching the filter, fix it to the LAN cable using a

supplied tie-wrap.

* Attach the clamp filter as near the main unit as possible.

LAN cable

Loosen the screw with the screw

driver, insert the digital input/output

communication wire, then tighten

the screw again to fix the wire firmly.

Round pressure

terminal

Attach a round pressure terminal to

the end of each wire of the power

cable, communication cable and

power cable for central controller.

Length of stripped RS-485

communication cable

DO1

DO2

DO-COM

Digital

output

DI1

DI2

DI-COM

DI3

Pulse or static

Static

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Andere Handbücher für BMS-SM1280HTLE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Steuereinheit Handbücher

Toshiba

Toshiba IK-HR1CS Bedienungsanleitung

Toshiba

Toshiba T300MVi MEDIUM VOLTAGE Bedienungsanleitung

Toshiba

Toshiba IK-TF7U Bedienungsanleitung

Toshiba

Toshiba RBM-SV1121HUPE Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-A7 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS1 Series Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba Adjustable Speed Drive H7 Series Bedienungsanleitung

Toshiba

Toshiba IK-HD1E Bedienungsanleitung

Toshiba

Toshiba B-EX206-QM-R Bedienungsanleitung

Toshiba

Toshiba RBM-A101VAE Bedienungsanleitung

Toshiba

Toshiba IK-4KE Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba GN-4020 Bedienungsanleitung

Toshiba

Toshiba RBM-PMV0363E, RBM-PMV0903E Bedienungsanleitung

Toshiba

Toshiba IK-CT1C Bedienungsanleitung

Toshiba

Toshiba B-EX906-H-QM-R Bedienungsanleitung

Toshiba

Toshiba IK-TF5U Bedienungsanleitung

Toshiba

Toshiba B-8204-QM-R Bedienungsanleitung

Toshiba

Toshiba TCB-CC163TLE Bedienungsanleitung

Toshiba

Toshiba IK-HD2C Bedienungsanleitung

Toshiba

Toshiba G3 Plus Pack Bedienungsanleitung

Toshiba

Toshiba IK-HD2E Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung