Toshiba LONWORKS LIU007Z Bedienungsanleitung

E6581371c

TOSVERT VF-FS1 series

LONWORKS®Communication option LIU007Z

Instruction Manual

NOTICE

1. Make sure that this instruction manual is delivered to the end user of

LONWORKS communication option.

2. Read this manual before installing or operating the LONWORKS communication

option. Keep it in a safe place for reference.

3. All information contained in this manual are subject to change without notice.

Please confirm the latest information on our web site “www.inverter.co.jp”.

E6581371c

Safety precautions

On the inverter and in its instruction manual, important information is contained for preventing

injuries to users, damages to assets, and for proper use of the device.

Read the instruction manual attached to the inverter along with this instruction manual to completely

understand the safety precautions, the symbols and indications shown below. Please adhere to the

contents of these manuals at all times.

Explanation of markings

Marking Meaning of marking

Danger Indicates that errors in operation may lead to death or serious injury.

Warning Indicates that errors in operation may lead to injury (*1) to people or that these errors may

cause damage to physical property. (*2)

(*1) Such things as injury, burns or shock that will not require hospitalization or long periods of outpatient

treatment.

(*2) Physical property damage refers to wide-ranging damage to assets and materials.

Meanings of symbols

Marking Meaning of marking

Indicates prohibition (Do not do it).

What is prohibited will be described in or near the symbol in either text or picture

form.

Indicates something mandatory (must be done).

What is mandatory will be described in or near the symbol in either text or picture

form.

Indicates danger.

What is dangerous will be described in or near the symbol in either text or picture

form.

Indicates warning.

What the warning should be applied to will be described in or near the symbol in

either text or picture form.

- 1 -

E6581371c

Limitation of use Safety precaution

Never use this unit with any device other than TOSVERT VF-FS1 series inverters. Doing so may

cause an accident.

Handling in general Danger

Never

Disassemble

Never disassemble, modify or repair the product.

Disassembling the product may cause electric shocks, fire or injuries.

For repairs, call your sales/repair agency.

Do not open the front cover on the inverter while the inverter power is on.

It may lead to electric shocks.

Do not remove this option from VF-FS1 while the power is on.

It may lead to electric shocks.

Do not put or insert foreign objects such as waste cable, bars or wires into the product.

Prohibited It may lead to electric shocks or fire.

Do not splash water over the product, and do not wipe the body with a wet cloth.

It may lead to electric shocks or fire.

Turn off the power immediately in case of any abnormalities such as smoke, smell or

abnormal noise.

Neglect of these conditions may lead to fire.

For repairs, call your sales/repair agency.

Do not touch the sharp portions (such as leads of parts on the board, the corner of

board, or etc.) on this option

It may lead to injuries.

Mandatory

Warning

This option is an electrostatic discharge sensitive device. Handle it, where the

environment is protected against electrostatic electricity.

Otherwise, permanent damage to device will result.

Mandatory

Transportation and installation Danger

Do not apply a dropping shock or other physical shocks.

Otherwise, damage or malfunction will result.

Do not install or operate the inverter if it is damaged or any part of it is missing.

Operating a defective inverter may lead to electric shocks or fire.

Prohibited For repairs, call your sales/repair agency.

Do not put any flammable material near the product.

It may catch fire due to the product sparking in the case of a malfunction.

Use this product under the environmental conditions prescribed in the instruction

manual.

Usage it under any other conditions may result in malfunction.

An emergency stop device must be installed that fits with system specifications

(e.g. shut off input power then engage mechanical brake).

Operation cannot be stopped immediately by the inverter or this unit alone, thus risking

an accident or injuries.

Mandatory Install this option into VF-FS1 and secure it by tightening the terminal board fixing

screws to the specified torque. Otherwise, it may cause the product falling, the damage,

or malfunctions.

When installing this option, do not touch its sharp portions such as leads of parts on the

board, the corner of board or etc.

Doing so may result in injury.

- 2 -

E6581371c

Wiring Warning

Electrical construction work must be done by a qualified expert.

Connection of input power by someone who does not have expert knowledge may

result in electric shocks or fire.

Turn off input power before wiring.

Wait at least 10 minutes and make sure that the charge lamp (on the inverter unit) is no

longer lit. Otherwise, it may lead to electric shocks.

Mandatory

Tighten the screws on the terminal blocks to the specified torque when connecting

cables to terminal blocks.

Otherwise, it may lead to fire.

Operations Danger

Do not pull on the cable and connector.

It may cause damage or malfunctions.

Prohibited

Use this option under the environment specified in the instruction manual.

Usage under the environment other than them may cause damages or malfunctions or

an accident.

Use an additional safety device with your inverter or system to prevent a serious

accident due to the unit malfunctions.

Usage without an additional safety device may cause an accident.

Mandatory

Warning

Set up “Communication error trip function (see below)” to stop the inverter when the

option unit is deactivated by an unusual event such as an operating error, power

outage, failure, etc.

- Communication error trip time

(f803, see the inverter instruction manual for details)

- Receive heart beat timer

(See the VF-FS1 LONWORKS Communication Function Manual for details)

Deactivated option unit may cause an accident, if the “Communication error trip

function” is not properly set up.

Make sure that the operation signals are STOP before clearing the inverter’s fault. The

motor may suddenly start and that may result in injuries.

Mandatory

Disposal Warning

If you dispose off this unit, have it done by a specialist in industrial waste disposal*.

Improper disposal may result in explosion of capacitors or produce noxious gases,

resulting in injuries.

(*) Persons who specialize in the processing of waste and known as “Industrial Waste

Product Collectors and Transporters” or “Industrial Waste Disposal Persons.” If the

collection, transport and disposal of industrial waste is done by someone who is not

licensed for that job, it is a punishable violation of the law (Laws in regard to cleaning

and processing of waste materials).

Mandatory

Notes on operation Notes

Avoid installing in a place where ambient temperature or/and humidity change sharply.

Keep the transmission cable separate from the power cable of the inverter to prevent the

inverter from malfunctioning due to electromagnetic noise.

Ground of SHLD terminal on this option at the grounding terminal separated from those

of inverters and motors. It may cause malfunction due to noise.

- 3 -

E6581371c

Preface

Thank you for purchasing the “LONWORKS communication option (LIU007Z)” for TOSVERT VF-FS1

inverter. By Installing this board into the VF-FS1, data communication can be made with a host

computer or other device via LONWORKS network.

Before using this unit, carefully read this instruction manual in order to completely and correctly utilize

excellent performance of this unit. Besides this instruction manual, the “VF-FS1 LONWORKS

Communication Function Manual” which includes the contents to install into LONWORKS network is

prepared. If it is required, please contact with our branch offices, sales offices or web site

“www.inverter.co.jp”.

(“VF-FS1 LONWORKS Communication Function Manual”: E6581373)

After reading this instruction manual, please keep it handy for future reference.

* Echelon®, LONWORKS®, LonTalk®, Neuron®, LONMARK®, LONMARK Logo®are the registered

trademarks or the trademarks of Echelon Corporation in the USA and other countries.

* LONMARK and LONMARK Logo are managed, granted, and used by LONMARK International under

a license granted by Echelon Corporation.

- Part numbering

LIU 007 Z –0

Revision number

Cable length ( “Z” means “without cable” )

Model number of LONWORKS option

Symbol of LONWORKS option

- Accessory check list

LONWORKS communication option is shipped together with the following accessories. On opening

the packing case, check to see if the following accessories are contained or not.

(1) Instruction manual Instruction

Manual

English (E6581371)..................................... 1 copy (This book)

(2) Cabling label & Name plate........................... 1 sheet.

||||||||||||||||||||

xxxxxxxxxx

(1 cabling label and 2 name plates)

(3) Insulating sheet ............................................. 1 sheet.

(4) Neuron ID Label ............................................ 4 sheets.

(These are stuck on the unit)

- 4 -

E6581371c

Table of Contents

1. Overview ···································································································································6

2. Names and functions·················································································································6

2.1. Service pin ························································································································6

2.2. Use of RS485 communication port····················································································6

2.3. Description of terminals·····································································································7

3. Installation and Setup················································································································8

3.1. Installation method············································································································8

3.2. VF-FS1 communication parameters··················································································9

3.3. Network cable connection·································································································9

3.4. Network configuration······································································································10

3.5. Termination resistor·········································································································11

3.6. Wiring of a control terminal······························································································11

4. Before making a service call ···································································································12

4.1. Display of service LED····································································································12

4.2. Other problems ···············································································································12

5. Specifications··························································································································13

6. Warranty··································································································································14

- 5 -

E6581371c

1. Overview

LONWORKS technology is a network control system concept developed by Echelon Corporation,

LONWORKS network provides Local Operating Network that is superior in the distributed control. Each

device works in a peer-to-peer fashion on LONWORKS network. This LONWORKS option is equipped

with the LONWORKS Smart Transceiver (NeuronChip).

2. Names and functions

The drawing below shows names and functions of main parts.

Selector switch (SW1)

- Logic for F, R terminal

(SINK/SOURCE)

- VIB function

(VIB/PTC)

Service pin (SW2)

Service LED

2.1. Service pin

Service pin is used for commissioning device. Use SW2 on the option board.

Danger

Mandatory

Operate Service switch only when a cover for the main circuit terminal is

attached.

Otherwise, it may lead to electric shocks.

Operate Service switch using the non-conductive stick. When it is operated with

a conductive stick.

Otherwise, it may lead to electric shocks.

2.2. Use of RS485 communication port

Serial communication (2-wire RS485) option can be used. However, while it is connected, the internal

communication line is switched to RS485 then the communication via LONWORKS network is disabled.

In this case, communication error trip time (f803) is also active. Use RS485 serial communication

option specified by Toshiba.

LONWORKS network detachable terminal

G/E

FLA

FLB

FLC

NETA

SHLD

NETB

Terminal board fixing

screw hole

(M3 screw)

Optional RS485 communication port

RS485 communication option can be

used. However it makes LONWORKS

Communication be disabled.

- 6 -

E6581371c

2.3. Description of terminals

Terminal

symbol Function Electrical specifications Internal circuits

NETA

NETB LONWORKS transmission

data / reception data no polarity

SHLD LONWORKS communication

shield terminal.

This terminal is not

connected to other circuits in

this board.

G/E Grounding terminal Connect to network ground

NETA

NETB

SHLD FT-X1

Spark

gap

G/E

Multifunctional programmable

contact input.

SINK/SOURCE can be

selected with SW1.

No voltage contact input

24VDC, 5mA or less

N.B. Use contact parts for

low current. F, R

P24

4.7k

PTC

SOURCESINK

820

VIB

Multifunction programmable

analog input.

with internal pull-up resistor

for PTC

0 to 10VDC input

Using this terminal as PTC

input, set SW1 to PTC side

and set the parameters

(f645 and f646) to

proper value.

VIB

15k

VIB

P10

PTC

15k

3.3k

CC Control circuit’s equipotential

terminal

P24 24 VDC power supply output 24VDC-50mA P24

P24

PTC

FLA

FLB

FLC

Multifunctional programmable

relay contact outputs

1c contact

30VDC-0.5A

250VAC-1A (cosφ =1）

250VAC-0.5A (cosφ =0.4)

FLA

FLB

FLC

Danger

Prohibited

Do not change switches settings while the power is on.

It may lead to electric shocks or damage.

Mandatory

Turn off the motor operation signals before setting the parameter and the switch

(SW1), when changing the VIB function. Otherwise, the motor may suddenly

start and that may result in injuries.

- 7 -

E6581371c

3. Installation and Setup

3.1. Installation method

Install the LONWORKS communication option to VF-FS1 as follows.

(1) Turn off the input power of VF-FS1 and wait for at least 10 minutes and then check that the

CHARGE lamp on VF-FS1 is no longer lit.

(2) Open the VF-FS1 front cover, remove the terminal board fixing screw and take off the VF-FS1

standard terminal board.

(Be careful not to lose the terminal board fixing screw when removed since it may be used again.)

(3) Perform wiring an inverter before installing LONWORKS communication option.

(4) Please attach the insulating sheet in VF-FS1.

(Fix to the terminal board fixing screw hole and PWB catch pin.)

(5) Install the LONWORKS communication option over the insulating sheet and secure it with the board

fixing screw (tightening torque of M3 tapping screw: 0.7 to 0.8Nm).

(6) Stick the cabling label for LONWORKS communication option on the standard cabling label stuck on

the reverse side of the VF-FS1 front cover. And stick the LONWORKS communication option

nameplate near the standard nameplate. (Be careful not to cover slits on the VF-FS1 enclosure.

N.B.: To install or remove the terminal board, make it slide in or out in parallel with board.

VF-FS1 unit Board catching pin

Cabling label position

VF-FS1 name plate

Terminal board fixing screw

(M3 screw tightening torque: 0.7 to 0.8Nm)

Board fixing screw hole

LONWORKS communication option

(

LIU007Z

)

VF-FS1 Standard terminal board

Stick the LIU007Z nameplate like

bellow figure.

LIU007Z

Insulating seat

(attached)

Example

- 8 -

E6581371c

3.2. VF-FS1 communication parameters

Set up the inverter parameters as follows. To update, reset the power of inverter. If these parameters

are not set to correct value, this unit can not work normally.

Title Function Description

cmod Command mode selection

fmod Setpoint mode selection

While LONWORKS communication option is installed

into VF-FS1, The network command and setpoint are

prior to cmod/fmod. VF-FS1 front panel operation

is prior when LOC lamp on the front panel turns on.

f800 Communication speed Set “1: 19200bps” (default).

f801 Parity Set “1: Even” (default).

f803 Communication error trip time Set communication time out period.

f829 Communication protocol Set “1: MODBUS-RTU”

f851 Operation at network error Set the behavior when “Receive heart beat timer”

overflow occurred.

Warning

Mandatory

Set up “Communication error trip function (f803, see the inverter instruction

manual for details)” to stop the inverter when this option unit is deactivated by an

unusual event such as tripping, an operating error, power outage, failure, etc.

Deactivated option unit may cause an accident, if the “Communication error trip

function” is not properly set up.

3.3. Network cable connection

Connect the LONWORKS network cable to LONWORKS communication option as follows.

(1) Cable selection (a twisted pair cable with shield)

Use Level 4/22 AWG cable for the network cable.

- Recommended cable

Manufacturer: Showa Electric Wire & Cable Co., Ltd.

Model name: LW221S, 22AWG, 1P, With shield, Standard 300m/reel

Use 0.75mm2wire for grounding to the earth terminal (G/E) of the board.

(2) Terminal blocks

NET

SHLD

NETB

Catches

Manufacturer: PHOENIX CONTACT

Model name: MSTB 2,5/3-ST-5.08

- Communication terminal NETA, NETB

Connect LONWORKS transmission/reception data cable.

Polarity of the communication terminals NETA and NETB does not have to be considered.

- Communication shield terminal SHLD

Connect the shield of network cable. Refer to next section for grounding.

- G/E terminal

Connect the network ground.

(3) Connection

Cable sheath should be peeled off by about 7mm.

For wiring work, use a flat blade screwdriver with a 0.6mm thick and 3.5mm width blade.

Tightening torque for the terminal block is 0.5Nm.

- 9 -

Inhaltsverzeichnis

Andere Toshiba Steuereinheit Handbücher

Toshiba

Toshiba BMS-SM1280HTLE Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-MB1 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS1 Series Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba B-EX700-WLAN2-QM-R Bedienungsanleitung

Toshiba

Toshiba IK-CT2D Bedienungsanleitung

Toshiba

Toshiba RBM-PMV0363E, RBM-PMV0903E Bedienungsanleitung

Toshiba

Toshiba 3 axis TB6560 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-A7 Bedienungsanleitung

Toshiba

Toshiba HX7 Series Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba Smart Manager Produkthandbuch

Toshiba

Toshiba MMW-UP0271LQ-E Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba GN-4030-A3 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO 810 Bedienungsanleitung

Toshiba

Toshiba GN-4020 Bedienungsanleitung

Toshiba

Toshiba B-8204-QM-R Bedienungsanleitung

Toshiba

Toshiba B-EX206-QM-R Bedienungsanleitung

Toshiba

Toshiba GN2020 Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba IK-TF5U Bedienungsanleitung

Toshiba

Toshiba T300MVi MEDIUM VOLTAGE Bedienungsanleitung

Toshiba

Toshiba IK-HD3D Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung