Toshiba Nv Series Bedienungsanleitung

Unified Controller

nv Series

DeviceNet Module DN912

Instruction Manual

6F8C1877

About this document

(1) The technical information provided of this document describes typical operations and applications of the product

and does not guarantee the intellectual property rights or other rights of our company or third parties nor allows

license of its use.

(2) No part or the whole of this document may be reproduced without permission.

(3) The information of this document may be changed in the future without notice.

(4) All possible measures have been taken to prepare the information of this document, however, if you have any

question, comment, and find any error, please contact us.

TC-net and Unified Controller nv series are trademarks of Toshiba Infrastructure Systems Corporation.

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and

other countries.

Ethernet and Ethernet are registered trademarks or trademarks of Fuji Xerox Co., Ltd.

DeviceNet is a registered trademark of Open DeviceNet Vender Association Inc.

Power Tap, T-Port Tap, DeviceBox Tap and FLEX I/O are registered trademarks of Rockwell Automation Co., Ltd.

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United

States and other countries.

Safety Precautions

Unified Controller nv Series DeviceNet Module DN912 Instruction Manual

On the product and this operation manual, important information for safe and correct use to prevent danger to

the user and other people as well as property damage is described.

Understand the following information (signs and symbols) before reading the text, and follow the described

items.

Description of signs

Sign

Meaning of the sign

This indicates an immediate danger that may result in death or serious

injury*1 if not avoided.

This indicates a danger that may result in death or serious injury*1 if

not avoided.

This indicates a danger that may result in minor or moderate injury*2 or

only a physical damage*3 if not avoided.

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock, broken

bones, or intoxication that will have aftereffects and require hospitalization or long -term hospital

visits for healing.

*2: An injury indicates an injury, burn, or electric shock that does not need hospitalization or long-term

hospital visits for healing.

*3: Physical damage indicates consequential damage in terms of breakage of properties or materials.

Description of symbols

Symbol

Meaning of the symbol

Indicates “Prohibition” or “You must not do”.

Specific details are indicated near the symbol with pictures and text.

Indicates “Mandatory Action” or “Do as indicated”.

Specific details are indicated near the symbol with pictures and text.

6F8C1877

Safety Precautio ns in Installation

Ground

Ground the device.

Otherwise, it may cause an electric

shock or fire.

Do not install, store or use in the following

environments.

・A place with a lot of dust.

・Locations where corrosive gas (SO2、

H2S) and flammable gas exist.

・Vibration or impact exceeding the

allowable value place.

・Places that condensation may occur

due to rapid temperature changes.

・Low or high temperature outside the

installation conditions.

・High humidity outside the installation

conditions.

・Places exposed to direct sunlight.

・Near equipment that generates strong

radio waves or magnetic fields.

It may cause accidents.

Install the equipment in a place where

maintenance and inspection can be easily

performed.

It may cause accidents.

Ventilation and intake / exhaust ports are

not blocked

It may cause fire or faults due to

overheating.

When installing and wiring the system,

observe the installation conditions and

installation methods in this manual.

Failed to do so might cause a collapse,

fire, failure, or malfunction.

Do not install or store the relay output

module under the following conditions:

・A place with silicon gas

・where silicon products are used

It may cause a contact point failure.

Do not allow strange objects such as wire

scraps to enter the module unit.

Failure to do so may cause fire,

breakdown or malfunction

The power supply module, CPU module,

and expansion IF module are dedicated to

the nv series, so attach them to the nv

series base unit.

DeviceNet module is attached to the

dedicated base unit

It may cause electric shock, injury or fault.

Do not use it separately or for any other

purpose.

Turn off the power when attaching /

detaching the module, base unit or

terminal block.

Failure to do so may cause electric shock,

malfunction or failure.

Securely connect the connectors, cables,

and mounting the module to the base unit

with screws.

Insufficient screw fastening may cause

failure or malfunction due to vibration.

Safety Precautio n on Wiring

Unified Controller nv Series DeviceNet Module DN912 Instruction Manual

iii

Turn off the power before wiring.

Failure to do so may cause electric

shock or failure

Use crimped terminals with sheath

or cover with tape for module wiring.

Exposed conductive parts may cause

electric shock.

At the end of wiring, securely attach

the terminal block cover tot the

terminal block.

Exposed conductive parts may cause

electric shock.

Connect an external power supply

according to the rating.

It may cause explosion or fire

Attach a fuse suitable for the current

capacity to the external circuit for

overload protection on the relay

output module.

Failure to do so may cause an accident

or damage to the machine due to load

short circuit.

Emergency stop circuit, interlock

circuit, etc. are configured outside the

nv series.

If a failure or malfunction occurs in the nv

series, may cause human injury or

machine damage.

6F8C1877

Safety Precautio ns for Daily Uses

Do not touch the module or unit

terminals while power is on.

Failure to do so may cause electric

shock.

Do not modify, repair, disassemble

or adjust equipment, modules or

boards.

Failure to do so might cause electric

shock, fire, injury or fault.

In case of malfunction or failure, contact

our service representative.

Check that the power supply

capacity, frequency, voltage, and

fluctuation rate conform to the

specifications of the equipment

before use.

If failure to do so, not only the

original performance of the device

will not obtained, but also the device

may be damaged or overheating

which can cause a fire.

Perform operations such as

program change, forced output,

RUN and HALT during operation

after confirming sufficient safety.

Wrong operation or neglect of safety

check may cause an accident or

damage to the machine.

Turn off the power if smoke or

strange odor is emitted.

Failure to do so may cause fire or

electric shock.

Contact our branches or service

agent.

Do not forcibly bend, pull or twist the

power cord or cable.

Failure to do so may cause

disconnection or overheating.

Do not insert metal or drop clips from

the gaps into device.

It may cause a fire.

Turn off the power if smoke or

strange odor is emitted.

Failure to do so may cause fire or

electric shock. Contact our branches or

service agent.

Do not use if the ambient

temperature or internal temperature

of the device rises abnormally or the

device fails.

If used in that circumstance, overheating

may cause a fire. Switch off the device

and contact your nearest service station.

Unified Controller nv Series DeviceNet Module DN912 Instruction Manual

Power ON in the following order:

nv series power supply→I/O

module supply external power

supply and external load power

supply.

If not following by this order, may cause

malfunction on accidents and machine

damage.

Turn off the load power before the nv

series power supply for system

safety.

If these are not observed, it may cause

accident or damage to the machine. The

external power supplied to the I/O

module should be shared with the load

power as much as possible. If not

possible, configure the system OFF so

that the external power supply and the

load power supply at the same time.

Safety Precautio ns on Maintenance and Inspections

Make sure that the external power

supply is turned off when attaching /

detaching modules, units. Terminal

blocks, or wiring cables.

Electrodes also appear on the back side

of the external terminal block of the

module, which may cause electric

shock.

Do not reverse the + and -, charge,

disassemble, over heat, drop into

fire, or short circuit of battery.

It may cause explosion or fire.

When replacing the power fuse or

alarm fuse of the device.

Failure to do so may cause electric

shock or fire.

Replace fuse and battery with

specified products.

Use of a non-specified product may

cause a fire or malfunction.

Be caution when measuring the

power supply voltage at the power

supply terminals of the module

during inspection.

There is a risk of electric shock.

6F8C1877

Safety Precautio ns for Disposal

Do not throw lithium battery into fire.

There is a danger of explosion.

Follow local government regulations

or rules when disposing of lithium

batteries

It may cause environmental damage.

nv series units and modules are

treated as industrial waste.

It may cause environmental damage.

Unified Controller nv Series DeviceNet Module DN912 Instruction Manual

vii

Restrictions on Applica tion

■This product has not been developed or manufactured for use in systems that include devices that

directly affect human life (* 1), so please do not use it for such purposes.

■If this product is used in a system (* 2) that involves devices that are involved in human safety and have

a significant effect on maintaining public functions, special considerations should be given to the

operation, maintenance, and management of the system (* 3) is required, so please consult with our

sales representative.

(*1) The following devices are directly related to human life.

・Medical equipment such as life support equipment and operating room equipment.

(*2) Systems that include devices that are involved in human safety and have a significant effect on

maintaining public functions include the following:

・Main engine control system for nuclear power plants, safety protection system for nuclear

facilities, other systems and systems important for safety.

・Operation control system and air traffic control system for collective transportation system.

(*3) The special consideration means to build a safety system (full proof design, fail-safe design,

redundant design, etc.) with sufficient consultation with our engineers.

Disclaimer

■The Company do not take any responsibility on any damage caused by earthquakes, thunderstorms,

floods, fires other than those liable for the Company, acts by third parties, other accidents, intentional or

negligence of customers, misuse, or use under abnormal conditions.

■The Company is not liable for incidental damages (loss of business profit, interruption of business,

alteration or loss of stored contents, etc.) resulting from use or inability to use this product.

■The Company is not liable for any damages arising from failure to observe the contents described in the

instruction manual.

■The Company will not responsible for any damages caused by malfunction from combination with

connection devices.

■The Company will not responsible for any damages caused by malfunction from combination with

customer-created application programs.

6F8C1877

viii

Precautions on Us age

●About installation

・Do not drop or hit the device or module, and do not subject them to strong shock.

It may cause a failure.

・Mobile phone, PHS, etc. shall be used at least 1m away from the running product, all transmission

cables, I/O cables, etc. It may cause system malfunction.

・Connect the connectors and cables, and mount the module to the base unit with screws to secure

it securely. Insufficient screw fastening may cause failure or malfunction due to vibration.

●Power supply wiring

・Keep cables as far away as possible from the other wires. Especially, keep it 200mm or more away

from power line.

・The terminal screw size is M3.5. Use compatible crimp terminals with 5.5mm or less width for M.5

screws.

・Do not connect anything to the NC section or any terminal or pin that has no description on.

●About using sample programs

・Use the sample program described in the instruction manual after confirming its operations by

customer. Carefully check before operation to prevent accidents due to malfunctions.

●About maintenance

・When handling a module that has been removed from the base unit, pay special attention to static

electricity. Place the module on a grounded desk with a conductive mat or conductive bag (bag

containing a spare board, etc.). It may cause parts to be damaged by static electricity.

・Before touching any equipment or module, touch a grounded metal object to discharge static

electricity from your body. Static electricity can cause equipment malfunction or failure.

・When holding the module, hold the handle and ejector on the front panel and do not hold the printed

circuit board directly. There is a risk of damage to components due to static electricity charged in

the hand, electric shock due to charge in the circuit, or injury to the hand due to circuit parts.

・Wipe the device or module with a soft cloth.

If it is very dirty, squeeze a cloth soaked with water.

Leaving it dirty can lead to erroneous decisions and operation errors.

・When cleaning the device or module, do not use benzene or thinner.

If do so may cause deformation or discoloration of the equipment panel or module.

・Perform daily inspections, periodic inspections, and cleaning to keep the system normal and

prevent unnecessary troubles.

Andere Handbücher für nv Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Controller Handbücher

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba CONNECT Bedienungsanleitung

Toshiba

Toshiba TC78B002FNG Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba TSL3000E Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba TXZ+ Series Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba T6963C Montage- und Bedienungsanleitung

Toshiba

Toshiba GX9 ASD Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba Prosec T-Series Bedienungsanleitung

Toshiba

Toshiba Preliminary TB6560AHQ Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba PROSEC T1-16S Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba TE3 Series Bedienungsanleitung

Toshiba

Toshiba V200 Series Bedienungsanleitung

Toshiba

Toshiba TCB-IFDA1GUL Bedienungsanleitung

Toshiba

Toshiba BMS-CT2560U-E Bedienungsanleitung

Toshiba

Toshiba TSL3000 Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba Vm Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch