Toshiba V Series Bedienungsanleitung

6F8C1130

  

Important Information

No patent liability is assumed by TOSHIBA Corporation with respect to use of information, illustrations,

circuits, equipment or examples of application in this publication.

TOSHIBA Corporation reserves the right to make changes and improvements to this publication and/or

related products at any time without notice. No obligation shall be incurred other than as noted in this

publication.

This publication is copyrighted and contains proprietary material. No part of this book may be reproduced,

stored in a retrieval system, or transmitted, in any form or by any means — electrical, mechanical,

photocopying, recording, or otherwise — without obtaining prior written permission from TOSHIBA

Corporation.

Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in the

U.S.A. and other countries.

6F8C1130

Safety Precautions

This manual contains important information for the operator to operate this product safely and

correctly and avoid bodily injury and property damage.

Grasp the meanings of the following marks and their descriptions before reading this manual.

Hazard Classifications

WARNING

Indicates a potentially hazardous situation which, if not avoided, could

result in serious injury or death.

CAUTION

Indicates a potentially hazardous situation which, if not a avoided, can

result in minor or moderate injury, or property damage. It can also be

used to alert against unsafe practices.

note: 1. Serious injury means loss of sight, injury, burns (high temperature, low temperature),

electrical shock, fracture, or intoxication which leaves aftereffects or requires hospitalization

or need to go to the hospital for a long time.

2. Injury means hurt, burn, or electrical shock which does not require hospitalization or going to

the hospital for a long time.

3. Property damage means extended breakdown of assets and materials.

Notation of Markings

Prohibited

Indicates a "may not" mark.

The concrete forbiddance is indicated with a pictograph or wording.

Mandatory

Indicate a mandatory action that you should never fail to do.

The concrete content is indicated inside or near the circle with a

pictograph or wording.

Caution

Indicates a caution.

The concrete content is indicated inside or near the triangle.

note: 1. The description of forbiddance, mandatory, and caution marks are subject to change,

depending on the labels on the main unit.

Remote Engineering Package

1. Checking the Warning Labels on the Main Unit

Make sure warning markings are attached on the main unit.

If any of them are missing or the wording is illegible, contact Toshiba's Service Department.

2. Precaution on Installation

WARNING

CAUTION

Avoid the following locations when installing or

storaging the equipment.

• Locations where there is dust, salinity, or ion

particles

• Locations where there are corrosive gases

(SO2, H2S) or flammable gases

• Locations where vibration or shock occurs

beyond the allowance

• Locations where there is condensation due

to sharp temperature variations

• Locations where the ambient temperature

exceeds the allowance range

• Locations where the relative humidity

exceeds the allowance range

• Locations where the equipment is exposed

to direct sunlight

• Locations where strong electric radiation or

magnetic field is generated

Improper the installation or writing of the

system can cause not only insufficient

performance but also malfunction and failure

of the equipment

Be sure to ground the equipment.

Operation without grounding may cause

accidental fire or shock.

Mandator

Install the equipment at a place where

maintenance and inspection are easy to do.

Otherwise, recovery from failure may take

much more time, leading to a serious

accidents.

Mandator

6F8C1130

iii

3. Safety Precautions on Maintenance and inspection

WARNING

CAUTION

Do not cover the hole of the equipment, and

the ventilator/air inlet of the system.

Otherwise, overheating, etc. can cause fire or

malfunction.

Forbidden

Turn off power removing or connecting any

modules, boards, or devices.

Otherwise, it can cause electrical shock, or

machine damage.

Mandator

Turn off power removing any modules after

installing.

Otherwise, exposed conductive parts of wire

or on the rear of terminal blocks can cause

electrical shock.

Mandator

Place any modules or boards removed from

the unit on a conductive mat or conductive

bag (containing a spare board, etc.) on an

grounded desk.

Otherwise, static electricity can damage

components of the module.

Mandator

Touch a grounded metal part to discharge the

static electricity on your body before touching

the equipment.

Otherwise, charged static electricity on your

body can cause malfunction or failure.

Mandator

Be careful not to hit or fall off the equipment

by accident.

Excess shock can cause failure.

Forbidden

Remote Engineering Package

4. Precautions During Parts Replacement

WARNING

5. Precautions During Daily Use

WARNING

Do not apply benzene and thinner when

cleaning the equipment.

Otherwise, it can cause deformity or

discoloration the panel or case of the

equipment.

Forbidden

Use soft cloth to clean the equipment.

Use water-dipped and squeezed cloth to clean

it if dirty.

Leaving the equipment dirty can cause

mistaken or malfunction.

Mandator

Turn off power of the equipment before

replacing the power fuse or warning fuse.

Otherwise, it can cause electrical shock or fire.

Mandator

Apply power of the specified ratings (voltage

fluctuation range, frequency, output rating,

etc.) in User's manual.

Otherwise, it can cause malfunction, machine

damage or fire due to overheat.

Mandator

Turn off power immediately if the ambient

temperature or internal temperature exceeds

beyond normal range or if failure is occurred in

the equipment.

Contact Toshiba for repairing.

Operation under such situation can cause fire

or electrical shock.

Mandator

6F8C1130

CAUTION

6. Safety Precautions on Disposal

WARNING

CAUTION

Do not touch any components, terminals,

connectors, or printed circuit boards in the

module.

Otherwise, it can cause the IC or LSI or the

like to be broken by static electricity, resulting

in failure or malfunction.

Also, the edge of components can cause

injury.

Forbidden

Do not forcibly bend or pull or distort the

power cord and other cables. Otherwise, they

can be cut off or cause overheat.

Forbidden

Do not disassemble or modify the equipment.

Otherwise, it can cause malfunction or failure.

Forbidden

Do not enter wire scrapes or other foreign

debris into the equipment.

Also, do not insert metal parts into them.

They can cause fire or accidents.

Forbidden

Do not throw lithium batteries into fire.

Otherwise, they can explode.

Forbidden

Observe local regulations for disposal of the

lithium batteries or the product (Base unit and

modules).

Mandator

Remote Engineering Package

Limitation of Applications

The equipment has been designed and manufactured for use in an industrial environment.

However, the equipment is not intended to be used for systems which can endanger human life (Note

1).

Consult Toshiba if you intend to use the equipment for a special application which involves human life

and has great influence on the maintenance of the public function (Note 2). This is why such

application requires special care on the operation, maintenance, and control of the system (Note 3).

(Note 1) The systems which can endanger human life are life maintenance systems, equipment

installed in the surgery, and other medical equipment.

(Note 2) The systems which involve human life and have great influence on the maintenance of the

public function mean the main control system of a nuclear power plant, safety and protection

system of a nuclear power facility, transport operation and control systems for mass

transportation, control systems of aviation and space systems, and other systems and

subsystems where safety is critical.

(Note 3) "Special care" means to build a safety system (foolproof design, fail safe design, redundancy

design, etc.) in full consultation with Toshiba's engineers.

Immunity

Toshiba is not liable for any loss caused by fire, earthquake, action by a third party, or other accidents,

or the operator's intentional or accidental misuse, incorrect use, or use under abnormal condition.

Toshiba is not liable for any incidental loss caused by the use or non-use of this product, such as loss

of business profits, suspension of business, or loss or change of data on memory.

Toshiba is not liable for the loss caused by an operation contradictory to any of the instructions stated

in this manual.

Toshiba is not liable for the loss caused by an incorrect operation in combination with other equipment.

Toshiba is not liable for the loss caused by a malfunction in combination with an application program

made by the customer.

NOTE:

Use cellular phones and PHSs at least one meter away from the working equipment, transmission

cables, and I/O bus cable. Otherwise, the system can malfunction.

6F8C1130 vii

Preface

This document is the user's manual for Remote Engineering Package of Integrated

Controller V series.

Without customization of the existing network infrastructure, this product will realize the

remote maintenance and engineering of V series via not only Intranet but also Internet.

Generally, to realize the remote maintenance and engineering of process controllers, most

of other remote control software products need to change some networking settings, for

instance, opening some special ports of user’s firewall. So they limits users to using the

software in Intranet or special VPN networks.

This product will solve the problems and limitations. Because this products can connect the

private PC on user’s private network with the remote PC on Internet over the user’s firewall,

using only HTTP and HTTPS protocols.

This product is independent of V-Tool, that is the engineering tool of V series. So it can be

used to not only remote control V-Tool, but also any other applications, for instance,

SCADA, maintenance tools on user’s PC.

Product name Product code

Remote Engineering Package [English/Japanese] GET9RB1SS

[Software of this Package]

(1) MAN-PC software : executed on the remote controlled PC.

(2) REM-PC software : executed on the remote operation PC.

[Software license]

One license allows the user to use one MAN-PC and one REM-PC.

[License authorization]

Set the 32 characters license-key to both PCs at only the first time to start.

The key is printed on the enveloped sheet of the package.

Each time to start, the license authorization is done automatically, connecting with

TOSHIBA server via Internet. So both MAN-PC and REM-PC need to be on the network

which can be connected with Internet.

Preface

Remote Engineering Package

viii

The contents of this document are shown as follows:

Chapter 1. Requirements for Remote Engineering

1.1 Requirements for Network Configuration

1.2 Requirements for Hardware and Software

Chapter 2. How to Install/uninstall Remote Engineering Package

2.1 How to install

2.2 Setting for license authorization

2.3 How to uninstall

Chapter 3. How to use Remote Engineering Package

3.1 Operation steps

3.2 Step1:Preparation

3.3 Step2:Staring REM-PC

3.4 Step3:Starting Server of REM-PC

3.5 Step4:Starting MAN-PC

3.6 Step5:Connecting MAN-PC to REM-PC

3.7 Step6:Starting Windows Remote Desktop

3.8 Step7:Operating Windows Remote Desktop

3.9 Step8:Closing Windows Remote Desktop

3.10 Step9:Closing MAN-PC

3.11 Step10:Closing REM-PC

3.12 Other operations

Chapter 4. Messages of Remote Engineering Package

4.1 Error messages of MAN-PC

4.2 Error messages of REM-PC

4.3 Messages of Windows Remote Desktop.

Chapter 5. Trouble Shooting of Remote Engineering Package

Andere Handbücher für V Series

Inhaltsverzeichnis

Andere Toshiba Controller Handbücher

Toshiba

Toshiba Q9 Plus ASD Bedienungsanleitung

Toshiba

Toshiba PROSEC T3H Bedienungsanleitung

Toshiba

Toshiba TE3 Series Bedienungsanleitung

Toshiba

Toshiba T300MVi MEDIUM VOLTAGE Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba TS1000 Installations- und Betriebshandbuch

Toshiba

Toshiba BMS-CT5121E Bedienungsanleitung

Toshiba

Toshiba TS2000 Bedienungsanleitung

Toshiba

Toshiba PROSEC T1 Bedienungsanleitung

Toshiba

Toshiba CONNECT Bedienungsanleitung

Toshiba

Toshiba GX9 ASD Bedienungsanleitung

Toshiba

Toshiba V200 Series Bedienungsanleitung

Toshiba

Toshiba RBC-ASC11E Bedienungsanleitung

Toshiba

Toshiba BMS-IFBN1281U-UL Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba Prosec T-Series Bedienungsanleitung

Toshiba

Toshiba 2000 Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba Programmable Controller PROSEC T3 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch