Toshiba 4200FA Series Bedienungsanleitung







     

         

  

           





 

TOSHIBA

4200FA SERIES

THREE PHASE- 15 & 25kVA

BATTERY SYSTEM

OPERATION MANUAL

FOR MODELS

T42-BC-FA

TOSHIBA INTERNATIONAL CORPORATION

INDUSTRIAL DIVISION

13131 West Little York Rd., Houston Texas, U.S.A. 77041

TOSHIBA

IMPORTANT NOTICE

UNINTERUPTIBLE POWER SUPPLY

If additional information or technical assistance is required call Toshiba’s marketing department toll free at

1-800-231-1412 or write to: Toshiba International Corporation, 13131 W. Little York Rd., Houston, TX

77041-9990.

Please complete the following information for your records and to remain within this equipment manual:

Model Number:

Serial Number:

Date of Installation:

Inspected By:

These Instructions are not intended to cover all of the details or variations in

equipment, or to provide for every possible contingency to be met in connection

with installation, operation, or maintenance. This manual may change without

notice. Contact your local Toshiba sales office to verify that this is the latest

revision. Should further information be desired or should particular problems arise

which are not covered sufficiently for the purchaser’s purposes, the matter should

be referred to the local Toshiba sales office.

The contents of this instruction manual shall not become a part of or modify any

prior or existing equipment, commitment, or relationship. The sales contract

contains the entire obligation of Toshiba International Corporation’s UPS Division.

The warranty contained in the contract between the parties is the sole warranty of

Toshiba International Corporation’s UPS Division, and any statements contained

herein do not create new warranties or modify the existing warranty.

Any electrical or mechanical modifications to this equipment, without prior

written consent of Toshiba International Corporation, will void all warranties

and may void UL/CUL listing. Unauthorized modifications also can result in

personal injury, death, or destruction of the equipment.

TOSHIBA

GENERAL SAFETY INSTRUCTIONS

Warnings in this manual appear in the following three ways:

1) Danger warnings - The danger symbol is an exclamation mark enclosed in a triangle, which

precedes the 3/16’ high letters spelling the word “DANGER”. The danger symbol is used to

indicate situations, locations, and conditions that exist and WILL serious injury or death.

DANGER

2) Caution warnings - The caution warning symbol is an exclamation mark in a triangle, which

precedes the 3/16” high letters spelling the word “CAUTION”. The warning symbol is used to

indicate situations and conditions that can cause operator injury and/or equipment damage.

CAUTION

3) Attention warning - The attention warning symbol is an exclamation mark enclosed in a

triangle which precedes the 3/16” high letters spelling the word “ATTENTION”. The Attention

warning symbol is used to indicate situations and conditions that can cause operator injury

and/or equipment damage.

ATTENTION

Other warning symbols may appear along with the Danger and Caution symbol and are used to specify

special hazards. These warnings describe particular areas where special care and/or procedures are

required in order to prevent serious injury and possible death:

1) Electrical warnings - The electrical warning symbol is a lighting bolt mark enclosed in a triangle.

The Electrical warning symbol is used to indicate high voltage locations and conditions that

may cause serious injury or death if the proper precautions are not observed:

2) Explosion warnings - The explosion warning symbol is an explosion mark enclosed in a

triangle. The Explosion warning symbol is used to indicate locations and conditions where

molten, exploding parts may cause serious injury or death if the proper precautions are not

observed:

TOSHIBA

CONTENTS

SECTION PAGE

IMPORTANT NOTICE .................................................................................................................................... 2

GENERAL SAFETY INSTRUCTIONS ........................................................................................................... 3

CONTENTS..................................................................................................................................................... 4

IMPORTANT SAFETY INSTRUCTIONS........................................................................................................ 5

2.0 Uncrating/Inspection/Storage/Disposal ........................................................................................... 8

2.1 Uncrating the Battery System ........................................................................................................... 8

2.2 Inspection of the new Battery System .............................................................................................. 9

2.3 Storage of the Battery System.......................................................................................................... 9

2.4 Disposal ............................................................................................................................................ 9

3.0 Installation......................................................................................................................................... 10

3.1 Installation Precautions................................................................................................................... 10

3.2 Conductor Routing and Grounding ................................................................................................. 10

4.0 Precautions ....................................................................................................................................... 11

4.1 Prestart Precautions ....................................................................................................................... 11

4.2 Operating Precautions .................................................................................................................... 11

5.0 Battery System Connections .......................................................................................................... 12

5.1 Power Connections......................................................................................................................... 12

5.2 Terminal Block Details .................................................................................................................... 12

5.3 Wire Size and tightening torque...................................................................................................... 13

6.0 Specifications ................................................................................................................................... 13

7.0 Preventive Maintenance and Scheduled Maintenance/Parts Replacement ............................... 14

7.1 Preventive Maintenance ................................................................................................................. 14

8.0 External Layouts/Dimensions/Weights.......................................................................................... 15

8.1 External Layouts: T42-BC-FA......................................................................................................... 15

8.2 External Dimensions....................................................................................................................... 16

TOSHIBA

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS This manual contains important that

should be followed during the

installation and maintenance of the Battery System. Turn off, lockout and tagout all power sources

before proceeding to connect the power wiring to the equipment or when performing maintenance.

The maximum ambient temperature that the Battery Systems should be operated in is 40oC (104oF).

The nominal battery voltages for these models are as follows:

15kVA: 288VDC

25kVA: 288VDC

Servicing of the batteries should only be performed by a qualified Toshiba Representative who is

knowledgeable of batteries and the required precautions. Keep unauthorized personnel away from

batteries. To arrange for battery replacement, contact your nearest Toshiba authorized service center.

Qualified Personnel ONLY

A Qualified Person is one that has the skills and knowledge relating the construction, installation, operation

and maintenance of the electrical equipment and has received safety training on the hazards involved

(Refer to the latest edition of NFPA 70E for additional safety requirements).

Qualified Personnel shall:

1) Have carefully read the entire operation manual.

2) Be trained and authorized to safely energize, de-energize, ground, lockout and tag circuits and

equipment, and clear faults in accordance with established safety practices.

3) Be trained in the proper care and use of protective equipment such as safety shoes, rubber gloves,

hard hats, safety glasses, face shields, flash clothing, etc., in accordance with established safety

practices.

4) Be trained in rendering first aid.

5) Be knowledgeable of batteries and required precautions.

For further information of workplace safety visit www.osha.gov.

When replacing batteries, use the same number and type-form of the following sealed, lead-acid battery:

Model Number Manufacturer Type Quantity

T42-BC-FA Enersys NPX-150R 24

DANGER Misuse of this equipment could result in human injury and equipment

damage. In no event will Toshiba Corporation be responsible or liable

for

either indirect or consequential damage or injury that may result from the use of this

equipment.

CAUTION Do not dispose of the batteries in a fire. The batteries may

explode.

CAUTION Do not open or mutilate the batteries. Released electrolyte is harmful to

the eyes and skin and could also be toxic.

TOSHIBA

IMPORTANT SAFETY INSTRUCTIONS

CAUTION This unit contains sealed lead acid batteries. Lack of preventative

maintenance could result in batteries exploding and emitting gasses

and/or flame. An authorized, trained technician must perform annual preventative

maintenance.

CAUTION Failure to replace a battery before it becomes exhausted may cause

the case to crack, possibly releasing electrolytes from inside the

battery, and

resulting in secondary faults such as odor, smoke, and fire.

CAUTION Installation and servicing of batteries should be performed by personnel

knowledgeable of batteries and the required precautions. Keep

unauthorized personnel away from the batteries.

CAUTION Proper maintenance to the battery system of this unit must be done by

a qualified service technician, this is essential to the safety and

reliability of

your UPS system. Refer to service manual.

A battery can present a risk of electrical shock and high

short

DANGER circuit current. Observe the following when working with

Batteries.

QUALIFIED PERSONNEL ONLY!

1) Verify that the UPS is off and that the power cord is disconnected from the power source.

2) Remove watches, rings or other metal objects.

3) Use tools with insulated handles to prevent inadvertent shorts.

4) Wear rubber gloves and boots.

5) Do not lay tools or metal parts on top of batteries.

6) Determine if the battery is inadvertently grounded. If inadvertently grounded, remove

source of ground. Contact with any part of a grounded battery can result in

electrical shock. The likelihood of such shock will be reduced if such grounds are

removed during installation and maintenance.

7) Verify circuit polarities prior to making connections.

8) Disconnect charging source and load prior to connecting or disconnecting terminals.

9) VRLA batteries contain an explosive mixture of hydrogen gas. Do not smoke, cause a flame

or spark in the immediate area of the batteries. This includes static electricity from the body.

10) Do not attempt to open the batteries in order to add water or sample the specific gravity of the

electrolyte. The batteries are valve regulated lead acid type and such servicing is not possible

without damaging the battery.

11) Use proper lifting means when moving batteries and wear all appropriate safety clothing and

equipment.

12) Do not dispose of lead acid batteries except through channels in accordance with local, state

and federal regulations.

TOSHIBA

INSTRUCTIONS IMPORTANTES CONCERNANT

LA SÉCURITÉ

CONSERVER CES INSTRUCTIONS Cette notice contient des

instructions importantes

concernant la sécurté

ATTENTION Un battery puet présenter un risque de choc électrique, de brûlure

par transfert d’ énergie.

ATTENTION Por le replacement, utiliser le même nombre de batteries du

modéle suivant.

Model Number Manufacturer Type Quantity

T42-BC-FA Enersys NPX-150R 24

ATTENTION L’élimination des batteries est règlementèe. Consultar les codes

locaux à cet effet.

TOSHIBA

2.0 Uncrating/Inspection/Storage/Disposal

2.1 Uncrating the Battery System

Upon receipt of the Battery System, a careful inspection for shipping damage should be

made.

1) On International models only, remove the screws

that attach the shipping crate to the pallet.

Remove the crate and packing material.

Figure 2.1.1

2) Unbolt the rails from the shipping pallet.

Place the rails on the front of the pallet

as shown in figure 2.2 and figure 2.3.

Use the four 1/2x3” bolts used to secure

the rails to the shipping pallet to attach

the rails as shown to the front of the

pallet.

Figure 2.2

3) Place the tie brackets as shown in figure 2.3 in the

slots at the lower end of the ramps. SLOWLY roll

the unit down the ramp.

1/2x3” Bolts

Tie Brackets

Figure 2.1.3

Rails

Andere Handbücher für 4200FA Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba UPS Handbücher

Toshiba

Toshiba Satellite 1700 Series Bedienungsanleitung

Toshiba

Toshiba 1500 Series Bedienungsanleitung

Toshiba

Toshiba 1000 Series Bedienungsanleitung

Toshiba

Toshiba 1400 XL PLUS Series Bedienungsanleitung

Toshiba

Toshiba 4200FA XT2 Leitfaden

Toshiba

Toshiba UF1A1A015C6(T) Bedienungsanleitung

Toshiba

Toshiba UNINTERRUPTIBLE POWER SYSTEM 1600XP Bedienungsanleitung

Toshiba

Toshiba 1000 Series Bedienungsanleitung

Toshiba

Toshiba G2020 Series Bedienungsanleitung

Toshiba

Toshiba G8000 Series Bedienungsanleitung

Toshiba

Toshiba Black Gold Series Bedienungsanleitung

Toshiba

Toshiba 4200FA Series Bedienungsanleitung

Toshiba

Toshiba UC1A1A020C6TB Installationshandbuch

Toshiba

Toshiba 4200FA XT1 Leitfaden

Toshiba

Toshiba G8000 Series Benutzerhandbuch

Toshiba

Toshiba G8000MM Series Kurzanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba 4200 FA CT Bedienungsanleitung

Toshiba

Toshiba 4200FA Series Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba G9000 SERIES Bedienungsanleitung

Toshiba

Toshiba 1500 Plus Series Bedienungsanleitung

Toshiba

Toshiba 4200FA Series Technisches Handbuch

Toshiba

Toshiba 1000 Series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung