Tosot U-match Series Bedienungsanleitung

Owner's Manual

Original Instructions

Air Conditioners

DC Inverter U-match Series for R410A Unitary

Split Air Conditioner

Models:

Outdoor Unit

TU36-24WADU

TU60-24WADU

To Users

Thank you for selecting TOSOT’s product. Please read this instruction manual

carefully before installing and using the product, so as to master and correctly use

the product. In order to guide you to correctly install and use our product and

achieve expected operating effect, we hereby instruct as below:

(1) This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without supervision.

(2) In order to ensure reliability of product, the product may consume some

power under stand-by status for maintaining normal communication of

system and preheating refrigerant and lubricant. If the product is not to be

used for long, cut off the power supply; please energize and preheat the unit

in advance before reusing it.

(3) Please properly select the model according to actual using environment;

otherwise it may impact the using convenience.

(4) This product has gone through strict inspection and operational test before

leaving the factory. In order to avoid damage due to improper disassembly

and inspection, which may impact the normal operation of unit, please do

not disassemble the unit by yourself. You can contact with the special

maintenance center of our company if necessary.

(5) When the product is faulted and cannot be operated, please contact with

our maintenance center as soon as possible by providing the following

information.

1) Contents of nameplate of product (model, cooling/heating capacity,

product No, ex-factory date).

2) Malfunction status (specify the situations before and after the error

occurs).

(6) All the illustrations and information in the instruction manual are only for

reference. In order to make the product better, we will continuously conduct

improvement and innovation. We have the right to make necessary revision

to the product from time to time due to the reason of sales or production,

and reserve the right to revise the contents without further notice.

(7) If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

Exception Clauses

Manufacturer will bear no responsibilities when personal injury or property loss

is caused by the following reasons:

(1) Damage the product due to improper use or misuse of the product.

(2) Alter, change, maintain or use the product with other equipment without

abiding by the instruction manual of manufacturer.

(3) After verification, the defect of product is directly caused by corrosive gas.

(4) After verification, defects are due to improper operation during

transportation of product.

(5) Operate, repair, maintain the unit without abiding by instruction manual or

related regulations.

(6) After verification, the problem or dispute is caused by the quality

specification or performance of parts and components that produced by

other manufacturers.

(7) The damage is caused by natural calamities, bad using environment or

force majeure.

(8) Gree Electric Appliances Inc.of Zhuhai assumes no responsibility for

personal injury, property loss or equipment damage caused by improper

installation and commissioning, unnecessary maintenance, or not following

relevant national rules and regulations, industrial standards and

requirements in this instruction manual.

(9) The final right to interpret for this instruction manual belongs to Gree

Electric Appliances Inc. of Zhuhai.

Contents

1 Safety Precautions ............................................................ 1

2 Product Introduction ......................................................... 5

2.1 Operating Range....................................................................5

2.2 Standard Accessories.............................................................5

2.3 Optional Accessories..............................................................5

3 Installation.......................................................................... 5

3.1 Installation Preparation ..........................................................5

3.2 Unit Installation ....................................................................11

3.3 Electrical Installation ............................................................18

3.4 Check after Installation.........................................................23

3.5 Test Running ........................................................................24

4 Maintenance ..................................................................... 25

4.1 Failures Not Caused by Faults of The AC ............................25

4.2 Error Code ...........................................................................27

4.3 Unit Maintenance .................................................................28

4.4 Notice on Maintenance ........................................................29

4.5 After-Sales Services.............................................................34

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To

return your used device, please use the return and collection systems or

contact the retailer where the product was purchased. They can take this

product for environmental safe recycling.

DC Inverter U-match Series for R410A Unitary Split Air Conditioner

1 Safety Precautions

This product can’t be installed at corrosive, inflammable or explosive

environment or the place with special requirements, such as kitchen. Otherwise, it

will affect the normal operation or shorten the service life of the unit, or even cause

fire hazard or serious injury. As for above special places, please adopt special air

conditioner with anti-corrosive or anti-explosion function.

Improper installation, adjustment, alteration, service, maintenance, or use can

cause explosion, fire, electrical shock, or other conditions which may cause death,

personal injury, or property damage. Consult a qualified installer, service agency, or

your distributor or branch for information or assistance. The qualified installer or

agency must use factory--authorized kits or accessories when modifying this

product. Refer to the individual instructions packaged with the kits or accessories

when installing. Follow all safety codes. Wear safety glasses, protective clothing,

and work gloves. Use quenching cloth for brazing operations. Have fire extinguisher

available. Read these instructions thoroughly and follow all warnings or cautions

included in literature and attached to the unit. Consult local building codes and

National Electrical Code (NEC) for special requirements. Recognize safety

information. This is the safety--alert symbol .

When you see this symbol on the unit and in instructions or manuals, be alert to

the potential for personal injury. Understand these signal words: DANGER,

WARNING, CAUTION and NOTICE. These words are used with the safety--alert

symbol.

Indicates a hazardous situation that, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation that, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation that, if not avoided, may result

in minor or moderate injury.

Indicates important but not hazard-related information, used to

indicate risk of property damage.

DC Inverter U-match Series for R410A Unitary Split Air Conditioner

Electrical shock hazard:

Failure to follow this warning could result in personal injury or death.

Before installing, modifying, or servicing system, main electrical disconnect

switch must be in the OFF position. There may be more than 1 disconnect switch.

Lock out and tag switch with a suitable warning label.

(1) The air conditioner should be grounded to avoid electric shock. Do not connect

the ground wire to gas pipe, water pipe, lightning arrester or telephone wire.

(2) The appliance shall be stored in a well-ventilated area where the room size

corresponds to the room area as specified for operation.

(3) The appliance shall be stored in a room without continuously operating open

flames (for example an operating gas appliance) and ignition sources (for

example an operating electric heater).

(4) According to federal/state/local laws

and regulations, all packages and

transportation materials, including nails, metal or wooden parts, and plastic

packing material, must be treated in a safe way.

(1) Please instal

l according to this instruction manual. Installation must be

performed in accordance with the requirement of NEC and CEC by authorized

personnel only.

(2) Any person who is involved with working on or breaking into a refrigerant circuit

should hold a current valid certificate from an industry-accredited assessment

authority, which authorises their competence to handle refrigerants safely in

accordance with an industry recognised assessment specification.

(3) Servicing shall only be performed as recommended by the equipment

manufacturer.

(4) The appliance shall be installed in accordance with national wiring regulations.

(5) The fixed wires connecting to the appliance must be configured with all-pole

disconnection device under voltage grade III according to wiring rules.

(6) Air conditioner should be stored with protective measures against mechanical

damage caused by accident.

(7) If the installation space for air conditioner pipe is too small, adopt a protective

measure to prevent the pipe from physical damage.

DC Inverter U-match Series for R410A Unitary Split Air Conditioner

(8) During installation, use the specialized accessories and components, otherwise

water leakage, electric shock or fire hazard may occur.

(9) Please install the air conditioner in a secure place that can withstand the weight

of air conditioner. Insecure installation may cause the air conditioner falling

down and lead to injury.

(10) Be sure to adopt independent power circuit. If the power cord is damaged, it

must be repaired by the manufacturer, service agent or other professional

agents.

(11) The air conditioner can be cleaned o

nly after it is turned off and

power-disconnected, otherwise electric shock may occur.

(12) The air conditioner is not intended to be cleaned or maintained by children

without supervision.

(13) Do not alter the setting of pressure sensor or other protective devices. If the

protective devices are short-circuited or changed against rules, fire hazard or

even explosion may occur.

(14) Do not operate the air conditioner with wet hands. Do not wash or sprinkle

water on the air conditioner, otherwise malfunction or electric shock will occur.

(15) Do not dry the filter with naked flame or an air blower; otherwise the filter will be

out of shape.

(16) If the unit is to be installed in a small space, please adopt protective measures

to prevent the concentration of refrigerant from exceeding the allowable safety

limit; excessive refrigerant leakage may lead to explosion.

(17) When installing or re-installing the air conditioner, please keep the refrigerant

circuit away from substances other than the specified refrigerant, such as air.

Any presence of foreign substances will cause abnormal pressure change or

even explosion, resulting in injury.

(1) Do not put a finger or other objects into the air inlet or return air grill.

(2) Please adopt safety protection measures before touching the refrigerant pipe;

otherwise your hands may be hurt.

(3) Please arrange the drain pipe according to the instruction manual.

(4) Never stop the air conditioner by directly cutting off the power.

(5) Please select the proper copper pipe according to the requirement for pipe

thickness.

DC Inverter U-match Series for R410A Unitary Split Air Conditioner

(6) Never install the air conditioner in the following places:

a) Places with oil smoke or volatile liquid: plastic parts may deteriorate and fall

off or even cause water leakage.

Places with corrosive gas: copper pipe or the welding parts may be

corroded and cause refrigerant leakage.

(7) Adopt proper measures to protect the outdoor unit from small animals because

they may damage the electric components and cause malfunction of the air

conditioner.

(1) If thermostat is to be used, it should be connected first before powering up the

unit, otherwise the thermostat may not be able to use.

(2) Only use soft dry cloth or slightly wet cloth with neutral detergent to clean the

casing of the air conditioner.

(3) Before operating the unit under low temperature, connect it to power for 8

hours. If it is stopped for a short time, for example, one night, do not cut off the

power (This is to protect the compressor).

DC Inverter U-match Series for R410A Unitary Split Air Conditioner

2 Product Introduction

2.1 Operating Range

—

Cooling

Heating

Outdoor

temperature

5°F(-15°C)~129.2°F (54°C) -22°F (-30°C)~75.2°F (24°C)

2.2 Standard Accessories

Outdoor unit accessories

No.

Name

Appearance

Q'ty

Usage

1 Drain plug 3 To plug the unused drain

hole

2 Drainage

connecter

or 1 To connect with the hard

PVC drain pipe

2.3 Optional Accessories

Outdoor unit accessories

No.

Name

Appearance

Q'ty

Usage

1 Throw-over

pipe

Connect the

unit with the

liquid pipe

2 Throw-over

pipe

Connect the

unit with the

gas pipe

3 Installation

3.1 Installation Preparation

3.1.1 Selection of Installation Location

①

The unit must be installed where strong enough to withstand the weight of the

unit and fixed securely, otherwise the unit would topple or fall off.

②.Install the air conditioner at a place where the inclination is less than 5°.

③.Do not install the unit at a place with direct sunlight.

④

Do not install where there is the danger of combustible gas leakage.

⑤.Do not install the unit at a place with leakage of inflammable gas.

DC Inverter U-match Series for R410A Unitary Split Air Conditioner

Selection of installation location for outdoor unit (Select a location pursuant to

the following condition).

(1) Noise and air flow produced by the outdoor unit will not disturb the neighbors.

(2) Select a location that is safe and away from animals and plants. If not, please

add safety fences to protect the unit.

(3) Install at a place with good ventilation. Make sure the outdoor unit stays at a

well-ventilated place with no obstacles nearby that may obstruct the air inlet

and outlet.

(4) The installation location should be able to withstand the weight and vibration of

outdoor unit and allow the installation to be carried out safely.

(5) Avoid installing at a place with leakage of inflammable gas, oil smoke or

corrosive gas.

(6) Keep it away from strong wind because strong wind will affect the outdoor fan

and lead to insufficient air flow volume and thus affecting the unit’s

performance.

(7) Away from any object that may get the air conditioner generating noise.

(8) Install the outdoor unit at a place where condensate can be easily drained.

3.1.2 Unit Dimension

TU36-24WADU

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tosot Klimaanlage Handbücher

Tosot

Tosot TM24H5O Bedienungsanleitung

Tosot

Tosot TU24-24AADU Bedienungsanleitung

Tosot

Tosot TW09HQ3D6DO Bedienungsanleitung

Tosot

Tosot MTS2R-18HDI Bedienungsanleitung

Tosot

Tosot GPC12AF-K3NNA7A Bedienungsanleitung

Tosot

Tosot TW12HQ3C2AI Bedienungsanleitung

Tosot

Tosot GPC08AO-A3NNA1A Bedienungsanleitung

Tosot

Tosot SMART INVERTER Series Bedienungsanleitung

Tosot

Tosot GPC05AK-A3NNA1C Bedienungsanleitung

Tosot

Tosot GWH09AGA-K6DNA1A Bedienungsanleitung

Tosot

Tosot PAT Series Bedienungsanleitung

Tosot

Tosot TW09HXP2A1A Bedienungsanleitung

Tosot

Tosot GPC08ASB-A6NNA1A Bedienungsanleitung

Tosot

Tosot GPC05AP-A3NNA1A Bedienungsanleitung

Tosot

Tosot TW09HQ2C2AO Bedienungsanleitung

Tosot

Tosot TTH09K3FI Bedienungsanleitung

Tosot

Tosot GL-09ZS2 Bedienungsanleitung

Tosot

Tosot TU18HKI Bedienungsanleitung

Tosot

Tosot TM12HKDI Bedienungsanleitung

Tosot

Tosot TW09HQ3D6D Bedienungsanleitung

Tosot

Tosot DC Inverter U-match Series Bedienungsanleitung

Tosot

Tosot TW09HQ3D6DI Bedienungsanleitung

Tosot

Tosot TUHD18ND3F1O Bedienungsanleitung

Tosot

Tosot HANSOL R32 Series Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung