Toto NEOREST TS991A Bedienungsanleitung

Replacement

Parts

Replacement Parts……...…

Getting

Started

How to use

MaintenanceTroubleshooting

Warranty

Maintenance….............

11~12

Periodic Checking.....…

Specification…….............…

15~16

1~5

Important Safeguards….

Model Numbers and

How to use………...............

7~8

Before Use.....................

■Thank you for your recent purchase

of TOTO products. Please read the

manual carefully to ensure the safe

use of your product.

0GU3020

05.2007

SHOWER TOWER

TS991A

Instruction Manual

How to Adjust……….........

13~14

Components …...

TroubleShooting……..…

English Español Français

Less than

185˚F (85˚C)

Warning

Do not use hot water supply that is higher

than 185˚F (85˚C).

Absolutely Do NOT.

Do not dissemble!

Mandatory!

The action must be performed as described.

Do Not!

●

After you read this instruction manual, keep it where it can be easily referred to again..

●The following symbols indicate safe and proper use of the product.

Failure to observe them may result in injury or property damage.

The symbols and their meanings are as follows:

Meaning

Sign

Warning

Caution

■The items of observation are clarified and described as follows.

Some models may have different components from the ones illustrated below.

Important Safeguards

(For your safety, please follow the instructions below)

Read the “Important Safeguards” section thoroughly before installing and using the product.

Ignoring these symbols may cause personal

injury or property damage

Ignoring this symbol may result in personal

injury or property damage.

If hot water is over 185˚F (85˚C), property damage,

scalding and other injuries are likely to occur..

Do not disassemble or modify the products

by using external parts or removing parts.

If the system is broken, property damage, scalding and

injuries are likely to occur.

Getting Started

Warning

Hand shower

Body shower

Showerhead

HOT!

You may get burned due to high

temperature of the hot water side.

You may be scalded due to high temperature

at the hot side.

Do not touch the left bottom of the

product or the installation adapters

as the hot water side with your bare

hand. Cover plates must be put or

all the times.

Do Not!

If it is set opposite to the function described,

you may be scalded when hot water is used

unintentionally.

Check Push buttons everytime before

using the product.

Check the temperature every time you take a

shower.

Everytime before using the hot water,

you must check with your hand that

the temperature is suitable with your

hand.

Scalding or other injuries may occur.

Do not disassemble or modify the item

in any way not decribed in this manual.

If the system is broken, property damage,

scalding and other injuries are likely to occur.

Ah!

Mandatory

Do not

disassemble

Do Not

touch

Do not allow children to use the product

without adult supervision.

Getting Started

Warning

HOT!

Slowly

Old check

valve

leakage!

New

check valve

Scalding may be resulted if push button are

pressed quickly without checking the temperature.

Leftover hot water flows out during the next use

and that person may be scalded.



The temperature control handle should

be kept under “104” before each use.



After hot water is used, let cold water

flow for a short time.

Always use the hot water with caution. Otherwise,

you may get scalded.



Before each use, always check the

water temperature.

Mandatory

If the shower tower is unstable and shaky,

property damage, scalding and injuries are likely

to occur.



Check regularly (twice a year) that

there is no leakage and that the

shower tower is not loose.

If check valve malfunctions, in some cases, the

water flow may reverse, and this may cause

unexpected accidents such as leakage. 

To guarantee the safety of the check

valves, replace them regularly

(Please refer to P.15)

If you turn the temperature handle too quickly,

the temperature may rise too fast, and you may

be scalded. 

Turn the temperature control handle

slowly and gently.

Ah!

loose-

ness!

Getting Started

Warning

Filter at hot side

Filter at

cold side

Check valve

OFF

Cap

°F

If the product is damaged and broken, property

damage, scalding and other injuries are likely

to occur.

Do not hit or impact the product with any

objects

If hot water pressure is higher than cold water

pressure, you cannot adjust the temperature

correctly, and you may be scalded

The cold water supply pressure must be

higher than that of the hot water supply

pressure.

(Please refer to P.12)

If check valves are shut off, hot water will expell

while removing the cap, which can scald you

and cause serious injury.

If you want to clean the filters, shut off the hot

and cold check valves.

Otherwise, scalding may be resulted from high water.

Regardless of the weather condition, always

check the temperature control handle, making

sure that it is at the cold side. Also confirm

water temperature of the product by using a

temperature indicator.

Do Not!

Scalding can be resulted from using very hot water.

For safety reasons, it is recommended to use

water under 104°F (40˚C).

Do not use very hot water (over 140°F)

during shower.

Ah!

Mandatory

104˚F

(40˚)

Getting Started

Caution

Do Not!

Otherwise, unexpected damage such as leakage

can be resulted.

Shut off the check valve or main valve, if the

Shower Tower is not used for long period of

time.

The shower tower or the supporting wall can be damaged

and property damage, injuries and leakage can be

resulted.

The shower bar should not be used as a handrail

grab bar or be used to hang objects. Do not also

attempt to hang from it.

When the temperature falls below freezing give

proper care to the piping and product to

prevent causing damage to the product and

malfunction

Do not drop or damage Handshower.

Overly frequent might cause pealing plating from the

surface. Replace a new one, if plating is pealed.

The Handshower should not be subjected to

overly frequent use, such as in a public

bathroom or in leisure facilities.

Slowly

Push the push buttons gently

If you press the push buttons too quickly, you

may hear the pipes rattle, property damage may

occur due to water leakage.

Freezing

Bathroom

Mandatory

Main

Valve

If the piping is frozen, the component may suffer

damage and/or leakage wrap the piping with heat

insulation.

Getting Started

Please refer to the Installaton manual for set-up drawing of the product.



water supply

inlet (Cold)

Water Supply

inlet. (Hot)

Temperature Control

handle

Volume Control

Handle

Showerhead

Push button for

Showerhead

Push button

for hand shower

Hand shower

Push button

for body shower

Body shower

2

Check valve at

Cold side



Filters



Model Number and Components

Check valve at

Hot side

Shower Arm

Shower Tower

Main Body

Shower

hose

Shower hager

MODEL #: TS991A

How to use

Confirm the temperature of the water output

If the temperature handle is different from the factory setting (supply water

temperature and static pressure), the water temperature will not be same as

indicated.

When this happens, check on the following key points.

2. Set the mark of temperature

handle to “104” on the scale.

3. Turn the flow lever to the

highest position.

1. Set temperature on the hot

water device.

4. Push the ON/OFF button of

hand shower.

Water should run out of the hand

shower.

5. Check outflow temperature.

If the outflow temperature is

appropriate (about 104

F), then

use the product normally.

If the outflow temperature is

inappropriate, refer to P.8 to set

the temperature handle correctly.

Tips

For safety reasons, the product is

equipped wth a function that keeps

scalding water from running, If set

correctly, themaximum temperature

is about (113

F).

Temperature control

handle

Push

104° F

Volume control

handle

Push button

for hand shower

Set the temperature on the hot

water device 68°F higher that the

outflow temperature.

To prevent scalding due to

malfunction, the recommended

hot water temperature is 140°F.

Hand shower

Mark

Before Use

How to use

Calibrate the valve

* To calibrate when the outflow temperature is not correctly indicated:

3. Ignoring the reading on the

scale turn the handle until

the actual temperature of the

water flowing out is 104°F.

Water should come out of

the hand shower.

2. Push the ON/OFF button of

the hand shower.

1. Turn the flow lever to the

highest position.

4. Remove the temperature

handle.

Make sure you do not to turn the

temperature handle while detaching it,

remove the small screw and

temperature handle.

Temperature

handle

Hot side

Small screw

Temperature

handle

Cold side

Ring

104° F

Hand shower

Flow lever

Since you have to remove the

ring to do this, be careful not

to lose it.

Push

ON/OFF button

of hand shower

Showerhead

Stop

Press the Push button gently.

Pressing it too hard or quickly may

result in water hammer.

Flow

Tips

●After the shower is shut off, water can still drip out for

a short time, this is just water leftover in the pipe. If it

does not stop after several minutes, check if you have

engaged the push button completely.

●“Water hammer” is a phenomenon where banging noise

can be heard when the water is shut off too

quickly, this is not a problem of the product. However care

should be taken to avoid this since pipe breakage or leakage

may result.

Press push button for the

showerhead.

Press push button for the

hand shower

Press push button for the

body shower

Tempered water will come out.

Press it again, and the water will stop.

Overhead shower

Body shower

Hand shower

Normal Operation (Use of push buttons).

How to use

Hand shower

Body Shower

How To Use

Inhaltsverzeichnis

Sprachen:

Andere Toto Sanitärprodukte Handbücher

Toto

Toto TBV01801U Montageanleitung

Toto

Toto MA TX426MMA Bedienungsanleitung

Toto

Toto TOJA TX471ST Bedienungsanleitung

Toto

Toto Standard EcoPower TEL5GSC Bedienungsanleitung

Toto

Toto REI S TX496SRSN Bedienungsanleitung

Toto

Toto Keane TB211S Montageanleitung

Toto

Toto ETHOS Series Montageanleitung

Toto

Toto PO TL380SDL Montageanleitung

Toto

Toto SW2033R Bedienungsanleitung

Toto

Toto GO TLG01309U Montageanleitung

Toto

Toto CLAYTON TB784DD Montageanleitung

Toto

Toto NEOREST Bedienungsanleitung

Toto

Toto UMI TX474SUN Bedienungsanleitung

Toto

Toto Soiree TB960S Montageanleitung

Toto

Toto Vivian TS220C1 Montageanleitung

Toto

Toto PO TL380SWL Montageanleitung

Toto

Toto GUINEVERE TS970C Series Bedienungsanleitung

Toto

Toto MONO TX119LMBR Bedienungsanleitung

Toto

Toto TTSH301M Montageanleitung

Toto

Toto TBV01801U Montageanleitung

Toto

Toto TLP02309 Bedienungsanleitung

Toto

Toto WH173BAT Series Bedienungsanleitung

Toto

Toto ALISEI THX118SX Bedienungsanleitung

Toto

Toto TGB500AZRV20 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema