TP-Link TR-966D Bedienungsanleitung

TR-966D

10/100Mbps WDM Fiber Bridge

User's Guide

Specifications are subject to change without notice.

is a registered trademark of TP-LINK

Technologies Co., Ltd. Other brands and product names

are trademarks or registered trademarks of their respective

holders.

No part of the specifications may be reproduced in any form

or by any means or used to make any derivative such as

translation, transformation, or adaptation without permission

from TP-LINK Technologies Co., Ltd. Copyright @2006 TP-

Table of Content

Package Contents........................................................................1

Introduction...................................................................................1

Features........................................................................................1

Network Cable Supported............................................................2

Appearance Indication.................................................................2

Installation Guide..........................................................................4

Appendix Specication.................................................................6

Package Contents

The following contents should be found in your box:

 One WDM Fiber Bridge

 One AC adapter

 This User’s Guide

 Warranty card

Introduction

The TR-966D product is 10/100Mbps WDM Fiber Bridge. By

deploying WDM technology (Wavelength Division Multiplexer),

only single-mode ber is needed to transmit and receive optical

Ethernet packets.

The TR-966D mediates between a 10/100Base-TX segment

and a 100Base-FX segment. It is primarily designed for large,

more high speed/bandwidth demanding workgroups that

require expansion of the fast Ethernet network.

Features



Compiles with 802.3u 10/100Base-TX and 100Base-FX

standard.



Provide two SC ber connectors and two RJ45 connectors.



Auto-detection of half/full duplex transfer mode for RJ45

port.

 Auto-negotiation of 10/100Mbps rate and Auto-MDIX for

RJ45 port.

 Fiber port only support full duplex transfer.



Extend ber distance up to 20km for

ber port.



Easy-to-view LED indicators provide status to easily monitor

network activity.

 External power supply.

Network Cable Supported

The connectors and network cables supported by the TR-966D

are listed in the following:

 RJ45 port: Cat 5 Twisted-pair

 SC Fiber port: single-mode ber cable

Appearance Indication

1. Front Panel

The front panel of the TR-966D consists of several LED

indicators

T1_SPD

T2_SPD

F2_LINK/ACT

F1_LINK/ACT

POWER

T2_LINK/ACT

T1_LINK/ACT

10/100M Fiber BridgeWDM

TR-966D

TR-966D Front Panel

2. Rear Panel

The rear panel of the TR-966D consists of one AC power

connector, two 10/100Mbps RJ45 ports and two SC Fiber

interfaces.

POWER T1 F2

TR-966D Rear Panel

3. LED Indicators

This TR-966D has LED indicators which can provide a real-

time report. When you take a look at these indicators, you will

know what’s happening your network.



Power(Red):

Lights when the adapter is properly plugged in.



T1_SPD/T2_SPD(Green):

Light when the RJ45 port is

connected to 100Mbps device; When the port connect to

a 10Mbps device, the LED turns off.



T1_Link/ Act/ T2_Link/ Act(Green): Steady green

indicates that a valid link exists. Flashing green indicates

that the

TR-966D

is receiving or transmitting data from the

RJ-45 port.



F1_Link/Act/ F2_Link/Act (Green): Steady green

indicates that a valid link exists. Flashing green indicates

that the TR-966D is receiving or transmitting data from

the ber port.

Installation Guide

1. Conguration

In order to achieve the aim of effectively expanding a Fast

Ethernet network, you can use the TR-966D as the example.

2. Installation procedure:

A. Connect the TR-966D to 10/100Base-TX Device (Hub or

Switch).

 Make sure that the length of twisted pair cable (Category-

5) between 10/100Base-TX device and converter is not

longer than 100 meters.

 Connect one end of twisted pair cable to RJ45 jack on the

TR-966D and the other end of the cable to the cable to

the RJ-45 jack on the 10/100Base-TX device.

B. Connect t h e TR-9 6 6D to 100Base-FX D e vice

Connection.

Connect on (SC) end of a singl-mode ber cable to the SC

connector F1/F2 on the TR-966D and the other end of

the cable to 100Base-FX device.

C. Turn on the device.

Notes:

The WDM technology employs passive optic multiplexing,

thus multiplex the transmit (TX) and receive (RX) lines onto a

single ber. WDM technology is implemented in couples. For

example, one site uses the F1 ber port on the TR-966D, the

other site uses DEVICE A, the ber port on DEVICE A must be

1550nm/1310nm WDM ber; One site uses the F2 ber port on

the TR-966D, the other site uses DEVICE B, the ber port on

DEVICE B must be 1310nm/1550nm WDM ber.

Appendix Specication

General

Standard IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX/100Base-FX

Topology Star

Protocol CDMA/CD

Data Transfer

Rate

Ethernet: 10Mbps(Half Duplex);

20Mbps(Full Duplex)

Fast Ethernet: 100Mbps(Half Duplex);

200Mbps(Full Duplex)

Ports 2 10/100Mbps RJ-45 ports

2 SC Fiber ports

( F1: 1310/1550 nm Single- mode single Fiber

F2: 1550/1310 nm Single-mode single Fiber)

LED indicator POWER Power on

Each port

RJ45 port:10/100Mbps Link/Act

and 100Mbps speed LED

Fiber port: 100Mbps Link/Act

Network

Medium

RJ45 port: Cat. 5 Twist-pair

SC Fiber port: single-mode ber cable

Max. Distance Twisted pair (Cat.5): 100m

Single-mode ber cable: 20km

Environmental and Physical

Power Power Adapter (9V, 0.8A)

Dimension(LxWxH) 122mmx76mmx24mm

Environment Operating temperature: 0ºC ~ 40ºC

Storage temperature: -20ºC ~ 70ºC

Humidity: 5% ~ 90% RH

71035589

TP-LINK TECHNOLOGIES CO.,LTD.

E-mail:[email protected]

Website:http://www.tp-link.com

Add:3/F.,Buiding R1-B,Hi-tech Industrial Park,Shennan Rd.,Shenzhen,P.R.China

Inhaltsverzeichnis

Andere TP-Link Netzwerk-Hardware Handbücher

TP-Link

TP-Link Deco M5 Handbuch

TP-Link

TP-Link BBA Mesh Bedienungsanleitung

TP-Link

TP-Link TL-SM221A Bedienungsanleitung

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link TL-PA4020P Bedienungsanleitung

TP-Link

TP-Link GPON OLT P1200-08 Bedienungsanleitung

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link VIGI NVR11104H-4P Bedienungsanleitung

TP-Link

TP-Link TL-SM301U Bedienungsanleitung

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link Kasa Smart KP200 Bedienungsanleitung

TP-Link

TP-Link tapo P306 Bedienungsanleitung

TP-Link

TP-Link TL-EP110 Bedienungsanleitung

TP-Link

TP-Link AC3200 Bedienungsanleitung

TP-Link

TP-Link CPE610 Bedienungsanleitung

TP-Link

TP-Link HC2220-G1u Bedienungsanleitung

TP-Link

TP-Link VIGI NVR2016H Bedienungsanleitung

TP-Link

TP-Link M7350 Bedienungsanleitung

TP-Link

TP-Link Pharos CPE210 Bedienungsanleitung

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link DECO X68 Bedienungsanleitung

TP-Link

TP-Link Archer AX11000 Bedienungsanleitung

TP-Link

TP-Link TL-WPA8631P Bedienungsanleitung

TP-Link

TP-Link TL-WPA4226KIT Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung