TP-Link TL-WA701ND Bedienungsanleitung

Connect to the Access Point with

the Ethernet cable or via wireless.

The default SSID of the Access

Point is TP-LINK_ XXXXXX. The

XXXXXX is the last 6 characters

of the Access Point’s MAC

address.

Plug the provided power adapter

into the power jack on the back of

the Access Point, and the other

end to a standard electrical wall

socket. Then press the ON/OFF

button to power on the device.

Turn on all of your network devices and then check to see if the LEDs on the

Access Point display normally as the diagram below describes.

Note If the distance between the outlet and the Access Point is too long to supply

the power, you can refer to the Power over Ethernet (PoE) solution in

Appendix A: With PoE Setup on page 13.

Solid light

Flashing

Solid light or flashing

Flashing if the Wireless

Radio function is enabled

Wireless Settings

dialog box will prompt you for the

User name and Password.Ente

the default values and click OK.

Note If the dialog box does not pop up, please refer to T3 in the Troubleshooting

guide on page 10. T2 will give you some help if you forget the password.

User name: admin

Password: admin

Click OK

Note If the LEDs display abnormally, please check to see if all the cable

connectors (power adapter and Ethernet cable) are well connected to you

device.

fter successfully logging in, the

Quick Setup page will display.

Open your web browser, type in

192.168.0.254 in the address

bar and press Enter

Click Next

Note If you click Exit and choose to configure the AP manually on your own need,

please note that the DHCP is enabled during the configuration, it is essential

to disable DHCP when all the settings are finished.

A. Access Point Mode

Introduction

In this mode, the product will act as a wireless central hub for your wireless LAN

clients, giving a wireless extension for your current wired network.

Settings

1. Create an easy-to-remember name for your wireless network here.

2. Select Most Secure (WPA/WPA2-PSK) mode and enter a password below to

prevent unauthorized access to your AP.

3. Input a password here.

For Access Point mode, please refer to part A on page 3.

For Multi-SSID mode, please refer to part B on page 4.

For Repeater(Range Extender) mode, please refer to part C on page 4.

For Bridge with AP mode, please refer to part D on page 6.

For Client mode, please refer to part E on page 7.

The Operation Mode page will

appear then. The TL-WA701ND

supports up to five operation

modes.

Select the operation mode

based on your need

Click Next

After the settings above, please go to Network Settings on page 8 to continue

the configuration.

B. Multi-SSID Mode

Introduction

In this mode, the product can be assigned up to four SSIDs to work with your VLAN.

Settings

After the settings above, please go to Network Settings on page 8 to continue

the configuration.

C. Repeater (Range Extender) Mode

Introduction

In this mode, the product can extend the coverage of another wireless Access Point

or Router. The universal repeater mode is for the wireless Access Point or Router

which does not support WDS function.

Note For the configuration of VLAN, please refer to the User Guide on the

Resource CD.

Click Next

You can create up

to 4 SSIDs and

rename them here.

Configure the

wireless security

for each SSID here.

Click Save to apply

the current security

settings for the

selected SSID.

Settings

After the settings above, please go to Network Settings on page 8 to continue

the configuration.

Select the repeater

mode, for example

Universal Repeater.

Click Survey

The window displaying a list of available SSIDs will appear.

You will then return to the

previous page.

Find the SSID of the

root Access Point /

Router that you want to

repeat, and then click

Connect in the

corres

ondin

row.

Select the security

mode and enter the

password that is the

same as on your router

or access point.

Click Next

Note The setup for WDS Repeater mode is similar to that of Universal Repeate

mode.

D. Bridge with AP mode

Introduction

In this mode, the product can wirelessly connect two or more remote LANs together.

Settings

Click Survey

The window displaying a list of available SSIDs will appear.

Find the SSID of the

root Access Point /

Router that you want to

bridge, and then click

Connect in the

corresponding row.

After the settings above, please go to Network Settings on page 8 to continue

the configuration.

E. Client Mode

Introduction

In this mode, the product will act as a wireless adapter to connect your wired devices

(eg. PC, Xbox, PS3, etc. ) to a wireless network.

Settings

Click Next

Enter the password

that is the same as on

the remote AP.

Name the bridge AP

here.

Click Next

Click Survey

You will then return to the

previous page.

After the settings above, please go to Network Settings on page 8 to continue

the configuration.

Network Settings

Find the SSID of the

Access Point / Router

or WISP, and click

Connect in the

corresponding row.

Click Next

Select the security

mode and enter the

password that is the

same as on the root

AP.

Note For advanced configurations on this page, please refer to the User Guide on

the Resource CD.

Click Next

The Network Setting

page will appear then. It

is recommended that

you keep the default

settings on this page.

The window displaying a list of available SSIDs will appear.

You will then return to the

previous page.

Congratulations! You have completed the setup.

Click OK

Note To change to another mode, please refer to T3 in Troubleshooting on page

10 to assign a static IP address 192.168.0.100 for your computer first before

logging in the management page.

Click Reboot

Check your settings

and click Save to save

your settings for future

reference

Wait until the router

restarts successfully.

The Finish page will

appear then. Here takes

the settings for Access

Point mode for example.

T1. How do I restore my Access Point’s configuration to its factory default settings?

T2. What can I do if I forget my password?

1) Restore the Access Point’s configuration to its factory default settings. If you

don’t know how to do that, please refer to previous section T1;

2) Use the default user name and password: admin, admin;

3) Try to reconfigure your AP by following the instructions of this QIG.

T3. What can I do if I cannot access the web-based configuration page?

Assign a static IP address 192.168.0.100 for your computer first before logging in the

management page. Here takes the procedures in Windows 7 for example.

With the Access Point powered on,

use a pin to press and hold the

RESET button on the rear panel fo

8 to 10 seconds before releasing it.

Once the Access Point is reset, the current configuration settings will be lost

and you will need to reconfigure the Access Point.

Note

Go to Start > Settings > Control

Panel, and then you will see the

following page.

Click View network

status and tasks

Hold it in for 8 to 10 seconds

Andere Handbücher für TL-WA701ND

Inhaltsverzeichnis

Andere TP-Link Drahtloser Zugangspunkt Handbücher

TP-Link

TP-Link Deco BE85 Bedienungsanleitung

TP-Link

TP-Link TL-WA5210G Bedienungsanleitung

TP-Link

TP-Link TL-WA7210N Bedienungsanleitung

TP-Link

TP-Link TL-WA901N Bedienungsanleitung

TP-Link

TP-Link AP200 Bedienungsanleitung

TP-Link

TP-Link AP8635-I Bedienungsanleitung

TP-Link

TP-Link Omada Pro Bedienungsanleitung

TP-Link

TP-Link Auranet EAP110 Bedienungsanleitung

TP-Link

TP-Link AP200 Bedienungsanleitung

TP-Link

TP-Link AP300 Bedienungsanleitung

TP-Link

TP-Link 54Mbps Wireless Access Point TL-WA501G Bedienungsanleitung

TP-Link

TP-Link Auranet EAP110 Bedienungsanleitung

TP-Link

TP-Link WA801ND Bedienungsanleitung

TP-Link

TP-Link TL-WA5210G Bedienungsanleitung

TP-Link

TP-Link CPE205 Bedienungsanleitung

TP-Link

TP-Link TL-WA5210G Bedienungsanleitung

TP-Link

TP-Link TL-WA701ND Bedienungsanleitung

TP-Link

TP-Link EAP690E Bedienungsanleitung

TP-Link

TP-Link Omada EAP620 Bedienungsanleitung

TP-Link

TP-Link AP300 V1 Kurzanleitung

TP-Link

TP-Link Omada EAP610 Bedienungsanleitung

TP-Link

TP-Link TL-WA1801 Bedienungsanleitung

TP-Link

TP-Link Omada EAP245 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP115-Wall Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung