TPS SmartCHEM-Ion3 Bedienungsanleitung

SmartCHEM-Ion3

TPS Pty Ltd

ABN 30 009 773 371

Phone: (07) 32058027

International: 61 732058027

Email: [email protected]

Web: www.tps.com.au

Congratulations!

The smartCHEM-Ion3 is an advanced, high quality Specific Ion, pH, mV & Temperature

instrument. It has three separate channels, each of which can be independently set for Specific Ion,

pH, mV or Relative mV.

Despite its impressive list of features, the smartCHEM-Ion3 is a breeze to operate. This manual

has been designed to help you get started, and also contains some handy application tips. If at any

stage you require assistance, please contact either your local TPS representative or the TPS factory

in Brisbane.

The manual is divided into the following sections:

1. Table of Contents

Each major section of the handbook is clearly listed. Sub-sections have also been included to

enable you to find the information you need at a glance.

1. Introduction

The introduction has a diagram and explanation of the display and controls of the

smartCHEM-Ion3. It also contains a full listing of all of the items that you should have

received with the unit. Please take the time to read this section, as it explains some of items that

are mentioned in subsequent sections.

1. Main Section

The main section of the handbook provides complete details of the smartCHEM-Ion3,

including operating modes, calibration, troubleshooting, specifications, and warranty terms.

1. Appendices

Appendices containing background information and application notes are provided at the back

of this manual.

Contents

1. Introduction 5

1.1 smartCHEM-Ion3 Display and Controls 5

1.2 smartCHEM-Ion3 Rear Panel Connectors 5

1.3 Function and Menu Keys 6

1.4 One-touch Keys 6

1.5 Numeric Keypad 6

1.6 Delete Key 6

1.7 240 x 64 Dot Graphic Display 6

1.8 Unpacking Information 7

1.9 Specifications 8

2. smartCHEM-Ion3 Menu Structure 11

3. Specific Ion Mode 13

3.1 Selecting Specific Ion Mode 13

3.2 Setting Specific Ion Standards 14

3.3 Specific Ion Calibration 17

3.4 Specific Ion Calibration Notes 19

3.5 Specific Ion Calibration Messages 21

4. pH Mode 22

4.1 Selecting pH Mode 22

4.2 Selecting the pH Buffer Set 23

4.3 Calibration Buffer Sequence 24

4.4 pH Calibration 26

4.5 pH Calibration Notes 29

4.6 pH Calibration Messages 30

5. Absolute Millivolt Mode 32

5.1 Selecting Absolute Millivolt Mode 32

5.2 Absolute Millivolt Calibration 33

5.3 mV Calibration Notes 34

5.4 mV Calibration Messages 35

6. Relative Millivolt Mode 36

6.1 Selecting Relative Millivolt Mode 36

6.2 Relative Millivolt Calibration 36

6.3 Relative Millivolt Calibration Notes 38

7. Temperature Mode 39

7.1 Temperature Calibration 39

7.2 Temperature Calibration Notes 40

7.3 Calibration Messages 40

7.4 Manual Temperature Setting 41

8. Auto Stability Function (ASF) 42

8.1 ASF During Normal Measurement 42

8.2 ASF During Calibration 42

8.3 ASF with Manual Datalogging 43

8.4 ASF with Automatic Datalogging 44

9. Display Backlight 45

10. Good Laboratory Practices (GLP) 46

10.1 To recall GLP information on the display 46

10.2 Failed Calibration 47

10.3 Printing GLP Information to the RS232 Port 47

10.4 GLP Calibration Alarm 48

10.5 Instrument Serial Number 49

10.6 Additional GLP Features 50

11. Access Code 51

11.1 Enabling the Access Code System 51

11.2 Using the Access Code System 51

11.3 Changing the Access Code 53

11.4 Disabling the Access Code System 53

12. Datalogging 54

12.1 Manual Datalogging 54

12.2 Automatic Datalogging 54

12.3 Recalling Readings from the Logger 57

12.4 Erasing Records from the Logger 57

12.5 Printing Records from the Logger to the RS232 Port 59

13. RS232 Port 60

13.1 Setting the Baud Rate 60

13.2 Sending Readings to the RS232 Port 60

13.3 RS232 Configuration 60

13.4 Communication and Statistical Software 60

13.5 Commands 61

13.6 Data Format 62

13.7 GLP Data Format 63

13.8 Importing Data into Microsoft Excel 64

14. Recorder Port 67

14.1 Recorder Port Configuration 67

14.2 Recorder Port Specifications 67

15. Setting the Clock 69

16. Initialising the smartCHEM-Ion3 70

17. Instrument firmware version number 70

18. Troubleshooting 71

18.1 General Errors 71

18.2 Specific Ion, pH and mV Troubleshooting 72

18.3 Temperature Troubleshooting 73

19. Appendices 74

19.1 pH Sensor Fundamentals 74

20. Warranty 77

1. Introduction

1.1 smartCHEM-Ion3 Display and Controls

1.2 smartCHEM-Ion3 Rear Panel Connectors

Turn the retaining nut clockwise until it clicks into place when plugging in plastic

connectors. This is essential to produce a waterproof seal.

Always replace the waterproof cap when a connector is not in use to maintain

waterproof integrity.

1.3 Function and Menu Keys

Press to enter the user-friendly menu system. is also used to step backwards through the

menu one level at a time, and as an “escape” key to quit functions such as calibration, data entry etc.

Press the to function keys to select desired options within the menu system.

Additionally, these keys perform the following function directly in normal measurement mode…

: Press to Zero Relative mV, when Relative mV is selected. See section 6.2.

: Press to start and stop the Automatic Stability Function. See section 8.

1.4 One-touch Keys

: Press to manually record readings into the Logger. See section 12.1.

: Press to transmit current reading plus date and time to the RS232 port. See section 13.2.

: Press to start and stop Automatic Datalogging. See section 12.2.

: Press to accept default values or those entered on the Numeric Keypad.

1.5 Numeric Keypad

Used to enter values during set-up and calibration. A decimal point is provided.

1.6 Delete Key

Press to make corrections to values entered on the Numeric Keypad.

1.7 240 x 64 Dot Graphic Display

Graphic display with large, clear digits and letters. Features a user-friendly menu and

context-sensitive help system. All three channels of Specific Ion/pH/mV/Relative mV plus

Temperature, Date and Time are displayed simultaneously.

Backlight can be set to On, Off or Energy Saver modes. See section 9.

1.8 Unpacking Information

Before using your new smartCHEM-Ion3, please check that the following accessories have been

included:

Part No

Standard Kit…

1. smartCHEM-Ion3 Specific Ion pH, mV, Relative mV, Temperature Meter 121164

2. Temperature/ATC Sensor 121248

3. Plug-Pack Power Supply 130037

4. smartCHEM-Ion3 Handbook 130050

Optional sensors that may have been ordered with your smartCHEM-Ion3…

1. Plastic Body pH Sensor, Porous Teflon Double Junction 121207

2. Intermediate Junction pH Sensor 121234

3. Plastic Body Combination Redox Sensor 121262

4. Intermediate Junction Redox Sensor 121263

5. Double Platinum Karl Fischer Sensor 122209

Instrument Options…

1. Flexible arm type sensor holder 130088

2. RS232 Serial Interface Cable 130041

3. Serial to USB adaptor (must also have 130041 Serial Cable) 130087

4. Recorder Output Option (includes cable) 130028

5. WinTPS RS232 Communication software for Windows 95, 98 and ME 130086

A complete range of Ion Selective, Reference, pH and Redox sensors is available from TPS.

1.9 Specifications

1.9.1 Specific Ion

Ranges

Resolution

Accuracy

Auto-ranging in units of

ppM, ppK, % and Exponential

Notation

User selectable for 3

significant digits, 2

significant digits or

Auto-rounding.

± Least significant digit

Sensor Type Compatible with all combination and half cell Ion

Selective Sensors for monovalent or divalent anions or

cations.

Input Impedance >3 x 1012 Ohms

Temperature Compensation Automatic, 0 to 100 OC

Calibration Automatic asymmetry and slope calibration in

user-defined standards.

Sensor Asymmetry Range Auto detection at calibration.

Sensor Slope Range 50.0 to 110.0 %

1.9.2 pH

Ranges

Resolution

Accuracy

0 to 14.000 pH

0 to 14.00 pH

0.001 pH

0.01 pH

±0.002 pH

±0.01 pH

Sensor Type Glass bulb pH sensor, combination or half cell.

Input Impedance >3 x 1012 Ohms

Temperature Compensation Automatic, 0 to 100 OC

Calibration Automatic asymmetry and slope calibration.

Automatic Buffer Recognition pH4.01, pH6.86, pH7.00, pH9.18 & pH10.01.

Any other can be entered during calibration.

Sensor Asymmetry Range -1.00 to 1.00 pH

Sensor Slope Range 85.0 to 105.0 %

1.9.3 Absolute and Relative mV

Ranges

Resolution

Accuracy

0 to ± 400.0 mV

0 to ±1500 mV

(auto-ranging)

0.1 mV

1 mV

±0.15 mV

±1 mV

Sensor Type Platinum or Gold tip ORP sensor, combination or half cell.

Ion Selective Sensors can also be used in this mode.

Input Impedance >3 x 1012 Ohms

1.9.4 Temperature

Range

Resolution

Accuracy

-10.0 to 120.0 OC

0.1 OC

±0.2 OC

Sensor Type Silicon transistor

Calibration Automatic offset calibration

Sensor Offset Range -10.0 to 10.0 OC

1.9.5 General Specifications

Memory 1489 readings including date and time

Automatic Logging User-set for one reading every 1 to 90 seconds, minutes or

hours.

RS232 Port 1200, 9600, 19200 & 38400 baud.

8 bits, no parity, 1 stop bit, XON/XOFF Protocol.

Clock Calendar clock displays date, month, year, hours, minutes

& seconds.

Good Laboratory Practices Date, time and results of last calibration for all parameters

are stored. This information can be recalled or sent to the

RS232 port at any time.

Power 12V DC, 90 mA (backlight off) / 130 mA (backlight on).

AC/DC adaptor to suit country of destination is included

in standard kit.

Dimensions 240 x 180 x 105 mm

Mass Instrument only : Approx. 1.0 kg

Full Kit : Approx. 2.0 kg

Environment Temperature : 0 to 45 OC

Humidity : 0 to 90 % R.H.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung