Trane TR200 MCB 105 Bedienungsanleitung

Rev.2008-12-17130R0476 MI11A102 *MI11A102*

MCB 105 - Relay I/O

Option Module

Operating Instructions

December 2008

TR200

BAS-SVX29A-EN

Trane has a policy of continous product and product data improvement and reserves the right to

change design and specifications without notice.

www.trane.com

For more information, contact your local Trane

office or e-mail us at [email protected]

Literature Order Number BAS-SVX29A-EN

Date December 2008

Supersedes

Warnings, Cautions and Notices

Note that warnings, cautions and notices appear at appropriate intervals throughout this manual. Warnings are

provide to alert installing contractors to potential hazards that could result in personal injury or death. Cautions

are designed to alert personnel to hazardous situations that could result in personal injury, while notices indicate

a situation that could result in equipment or property-damage-only accidents.

Your personal safety and the proper operation of this machine depend upon the strict observance of these

precautions.

Warnings, Cautions and Notices appear at appropriate sections throughout this literature. Read these carefully.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It could also

be used to alert against unsafe practices.

NOTICE

Indicates a situation that could result in equipment or property-damage only accidents.

Note

Indicates something important to be noted by the reader.

✮Indicates default setting

TR200 MCB 105 Relay I/O Option Module 1

TR200 MCB 105 Relay I/O Option Module

The MCB 105 option includes 3 pieces of change over contacts and can be fitted into option slot B.

Electrical Data:

Max. terminal load (AC) 240 V AC 2A

Max. terminal load (DC) 24 V DC 1A

Min. terminal load (DC) 5 V 10 mA

Max. switching rate at rated load/min. load 6 min-1/20 sec-1

WARNING

Hazardous voltage with Dual Supply!

• The label MUST be placed on the keypad frame as shown (UL approved).

• The power to the frequency converter must be disconnected.

• The power to the livepart connections on relay terminals must be disconnected.

Failure to follwo recommendations could result in death or serious injury.

• Remove the keypad, the terminal cover and the cradle from the frequency converter.

• Fit the MCB 105 option in slot B.

• Connect the control cables and relieve the cables by the enclosed cable strips.

• Various systems must not be mixed.

• Fit the extended cradle and terminal cover.

• Replace the keypad.

• Connect power to the frequency converter.

• Select the relay functions in par. 5-40 [6-8], par. 5-41 [6-8] and par. 5-42 [6-8].

Array [6] is relay 7, array [7] is relay 8 and array [8] is relay 9.

TR200 MCB 105 Relay I/O Option Module

2TR200 MCB 105 Relay I/O Option Module

Illustration 1. 1: Correct relay wiring

NOTICE

Do not combine liveparts and PELV systems.

Illustration 1. 2: Correct wire inserting.

TR200 MCB 105 Relay I/O Option Module

TR200 MCB 105 Relay I/O Option Module 3

Rev.2008-12-17130R0476 MI11A102 *MI11A102*

MCB 105 - Relay I/O

Option Module

Operating Instructions

December 2008

TR200

BAS-SVX29A-EN

Trane has a policy of continous product and product data improvement and reserves the right to

change design and specifications without notice.

www.trane.com

For more information, contact your local Trane

office or e-mail us at [email protected]

Literature Order Number BAS-SVX29A-EN

Date December 2008

Supersedes

Inhaltsverzeichnis

Andere Trane Steuereinheit Handbücher

Trane

Trane PM014 Montage- und Bedienungsanleitung

Trane

Trane TZON1050AC52ZA Bedienungsanleitung

Trane

Trane Symbio 700 FIAOPTN001 Series Bedienungsanleitung

Trane

Trane CG-SVN01A-EN Bedienungsanleitung

Trane

Trane Tracer Summit Montageanleitung

Trane

Trane TR200 MCB 101 Bedienungsanleitung

Trane

Trane XL824 Bedienungsanleitung

Trane

Trane XL824 Bedienungsanleitung

Trane

Trane Tracer XM30 Montage- und Bedienungsanleitung

Trane

Trane TCONT850 Bedienungsanleitung

Trane

Trane AYSVPANL0022AA Series Montageanleitung

Trane

Trane UNT-SVU011C Series Kurzanleitung

Trane

Trane MERCURY EDAB 1105A Kurzanleitung

Trane

Trane 700 Bedienungsanleitung

Trane

Trane TRACER SUMMIT BMTX-SVU01B-EN Bedienungsanleitung

Trane

Trane VAV Bedienungsanleitung

Trane

Trane Tracer MP503 Montage- und Bedienungsanleitung

Trane

Trane BAS-SVN213A-EN Bedienungsanleitung

Trane

Trane ADAPTIVE CONTROL UCM-CLD Betriebsanleitung

Trane

Trane Wireless Comm Montage- und Bedienungsanleitung

Trane

Trane RTHC-SVN02C-EN Bedienungsanleitung

Trane

Trane ComfortLink II XL 850 Bedienungsanleitung

Trane

Trane XL824 Bedienungsanleitung

Trane

Trane BAYLOAM105AA Montageanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung