Trane Tracer MP503 Betriebsanleitung

Installation and

Operation

Tracer MP503

Input/Output Module

CNT-SVX09B-EN

April 2005

CNT-SVX09B-EN

Tracer MP503 Input/Output Module Installation and Operation

This guide and the information in it are the property of American Standard Inc. and may not be used or reproduced in whole or in part,

without the written permission of American Standard Inc. Trane, a business of American Standard, Inc., has a policy of continuous

product and product data improvement and reserves the right to change design and specification without notice.

Although Trane has tested the hardware and software described in this guide, no guarantee is offered that the hardware and software

are error free.

Trane reserves the right to revise this publication at any time and to make changes to its content without obligation to notify any per-

son of such revision or change.

Trane may have patents or patent applications covering items in this publication. By providing this document, Trane does not imply

giving license to these patents.

The following are trademarks or registered trademarks of American Standard Inc.: Trane, Tracer, Rover.

The following are trademarks or registered trademarks of their respective companies or organizations: BACnet from

ASHRAE; Neuron, LonMark, LonTalk, and LonWorks from Echelon Corporation; National Electrical Code form the National

Fire Proctection Association, Inc.

Printed in the U.S.A.

™

CNT-SVX09B-EN

NOTICE:

Warnings and Cautions appear at appropriate sections throughout this manual. Read these carefully:

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

It may also be used to alert against unsafe practices.

CAUTION

Indicates a situation that may result in equipment damage or property damage.

The following format and symbol conventions appear at appropriate sections throughout this manual:

IMPORTANT

Alerts installer, servicer, or operator to potential actions that could cause the product or system to

operate improperly but will not likely result in potential for damage.

◆This symbol precedes a procedure that consists of only a single step.

Note:

A note may be used to make the reader aware of useful information, to clarify a point, or to describe

options or alternatives.

CNT-SVX09B-EN i

Contents

Chapter 1 Overview and specifications . . . . . . . . . . . . . . . . . . 1

Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Storage environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Agency listing/compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Additional components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Power transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Input devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Output devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2 General wiring information. . . . . . . . . . . . . . . . . . . 5

Input/output terminal wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

AC-power wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Communication-link wiring and addressing . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 3 Mounting the module . . . . . . . . . . . . . . . . . . . . . . . 9

Location recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Operating environment requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mounting recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 4 Applications of the Tracer MP503. . . . . . . . . . . . . 11

Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Binary inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Thermistor inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

0–20 mA inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

0–10 Vdc inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Wiring requirements and options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Contents

ii CNT-SVX09B-EN

Chapter 5 Network variable bindings . . . . . . . . . . . . . . . . . . 15

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Network variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Binding network variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Tracer MP503 bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Receiving data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Sending data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Examples of network variable bindings . . . . . . . . . . . . . . . . . . . . . . . . . 19

Example 1: Display sensor readings from a Tracer MP503

on a Tracer MP581 operator display . . . . . . . . . . . . . . . . . . . . . . . . 19

Example 2: Display sensor readings from a Tracer MP503

on two different Tracer MP581 operator displays . . . . . . . . . . . . . 21

Example 3: Control a binary output on the Tracer MP503

from a Tracer MP581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Example 4: Use a sensor reading on a Tracer MP503

to control a pump VFD on a Tracer MP581 . . . . . . . . . . . . . . . . . . 23

Chapter 6 Status indicators for operation and

communication . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Tracer MP503 circuit board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Service Pin button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Interpreting LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Service LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

LonTalk LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Binary output LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Chapter 7 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Initial troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Binary output (relay output) troubleshooting. . . . . . . . . . . . . . . . . . . . . 33

Universal input troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

CNT-SVX09B-EN 1

Chapter 1

Overview and specifications

This guide provides installation and configuration information for the

Tracer MP503 input/output (I/O) module, as well as a description of its

operations. The overview includes a product description, specifications,

and descriptions of additional components needed in some Tracer MP503

applications.

Product description

The Tracer MP503 I/O module is a field-installed device used to monitor

inputs and control binary outputs. The module has four universal inputs

that can be configured as binary, thermistor, 0–20 mA, or 0–10 Vdc, as

well as four binary outputs.

Storage environment

If a Tracer MP503 I/O module is to be stored for a substantial amount of

time, store it in an indoor environment that meets the following

requirements:

•Temperature: –40° to 185°F (–40° to 85°C)

•Relative humidity: 5–95%, noncondensing

Operating environment

Operate a Tracer MP503 I/O module in an environment that meets the

following requirements:

•Temperature: –40°F to 158°F (–40°C to 70°C)

•Relative humidity: 5–95%, non-condensing

Dimensions

Plastic-cover model dimensions

For complete dimensional drawing, see .

•Height: 5.375 in. (137 mm)

•Width: 6.875 in. (175 mm)

•Depth: 2 in. (51 mm)

Chapter 1 Overview and specifications

2CNT-SVX09B-EN

Metal-cover model dimensions

For complete dimensional drawing, see .

•Height: 9.0 in (25 mm)

•Width: 10.37in. (263 mm)

•Depth: 2.25 in. (58 mm)

Clearances

For wiring, ventilation, and maintenance, provide thefollowing minimum

clearances for the module, :

Plastic-cover model

(see Figure 1 on page 3)

•Front: 4.0 in. (102 mm)

•Each side: 1.0 in. (25 mm)

•Top and bottom: 4.0 in. (102 mm)

Metal-cover model

(see Figure 2 on page 3)

•Front: 24.0 in. (610 mm)

•Each side: 2.0 in. (51 mm)

•Top and bottom: 1.0 in. (25 mm)

Power

The transformer must meet the following minimum requirements for the

controller and its output devices:

•19–30 Vac (24 Vac nominal)

•50/60 Hz

•9 VA and 12 VA maximum per binary output utilized

Operating environment

Operate a Tracer ZN517 unitary controller in an indoor environment that

meets the following requirements:

• Temperature: From –40°F to 160°F (–40°C to 70°C)

• Relative humidity: From 5–90%, noncondensing

Operating environment

CNT-SVX09B-EN 3

Figure 1. MP503 plastic-cover model dimensions and clearances

Figure 2. MP503 metal-cover model dimensions and clearances

4 in.

(102 mm)

1 in.

(25 mm)

5.625 in.

(143 mm)

5.375 in. (137 mm)

1 in.

(25 mm)

6.31 in.

(160 mm)

4 in.

(102 mm)

4 in.

(102 mm)

2 in. (51 mm)

6.875 in.

(175 mm)

Clearances

Dimensions

1 in.

(25 mm)

9 in.

(229 mm)

2 in.

(51 mm)

24 in.

(610 mm)

10.37 in.

(263 mm)

width with cover

1 in.

(25 mm)

2.25 in.

(58 mm)

Clearances

Dimensions

2 in.

(51 mm)

0.28 in.

(7 mm)

9 in.

(229 mm)

6.5 in.

(165 mm)

1.875 in.

(48 mm)

7 in.

(178 mm)

1 in.

(25 mm)

10.25 in.

(260 mm)

width without cover

Chapter 1 Overview and specifications

4CNT-SVX09B-EN

Storage environment

If you are storing a Tracer ZN517 unitary controller for a substantial

amount of time, store it in an indoor environment that meets the

following requirements:

• Temperature: From –40° to 185°F (–40° to 85°C)

• Relative humidity: From 5–95%, noncondensing

Agency listing/compliance

CE—Immunity:

EMC Directive 89/336/EEC

EN 50090-2-2:1996

EN 50082-1:1997

EN 50082-2:1995

EN 61326-1:1997

CE—Emissions:

EN 50090-2-2:1996 (CISPR 22) Class B

EN 50081-1:1992 (CISPR 22) Class B

EN 55022:1998 (CISPR 22) Class B

EN 61326-1:1997 (CISPR 11) Class B

UL and C-UL listed:

Energy Management Equipment—PAZX (UL 916)

UL 94-5V (UL flammability rating for plenum use)

FCC Part 15, Subpart B, Class B

Andere Handbücher für Tracer MP503

Inhaltsverzeichnis

Andere Trane Steuereinheit Handbücher

Trane

Trane RTHC-SVN02C-EN Bedienungsanleitung

Trane

Trane UNT-SVU011C Series Kurzanleitung

Trane

Trane ComfortLink II XL 850 Bedienungsanleitung

Trane

Trane Symbio 700 FIAOPTN001 Series Bedienungsanleitung

Trane

Trane XL824 Bedienungsanleitung

Trane

Trane TR200 MCB 105 Bedienungsanleitung

Trane

Trane VAV Bedienungsanleitung

Trane

Trane XL824 Bedienungsanleitung

Trane

Trane TRACER SUMMIT BMTX-SVU01B-EN Bedienungsanleitung

Trane

Trane VAV-UCM 4.2 Bedienungs- und Sicherheitshinweise

Trane

Trane 700 Bedienungsanleitung

Trane

Trane Belimo B2 Series Bedienungsanleitung

Trane

Trane BAYENTH001A Montageanleitung

Trane

Trane XL824 Bedienungsanleitung

Trane

Trane ADAPTIVE CONTROL UCM-CLD Betriebsanleitung

Trane

Trane BAY4TXV1830A Montageanleitung

Trane

Trane BAS-SVN213A-EN Bedienungsanleitung

Trane

Trane Tracer XM30 Montage- und Bedienungsanleitung

Trane

Trane MERCURY EDAB 1105A Kurzanleitung

Trane

Trane Wireless Comm Montage- und Bedienungsanleitung

Trane

Trane BAYLOAM105AA Montageanleitung

Trane

Trane VariTrane Betriebsanleitung

Trane

Trane Tracer MP503 Montage- und Bedienungsanleitung

Trane

Trane TZON1050AC52ZA Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung