Transforming Technologies Ohm Metrics SRM 310 Bedienungsanleitung

T R A N S F O R M I N G T E C H N O L O G I E S , L L C

O U T S T A N D I N G A L T E R N A T I V E S I N S T A T I C C O N T R O L

Pocket Resistance Meter

Model SRM 310

Instruction Manual

Ohm Metrics™

Contents

1Description

SRM 310 1

Ohm Metrics 1

2Operation

Battery Installation 2

Measuring Surface Resistance 2

Measuring Resistance to Ground 2

Measuring Two Point Resistance 3

LED Indication Guide 4

Calibration 4

3Parts Included List 4

4Specifications 4

5Service and Warranty 5

Description

Ohm Metrics Pocket Resistance Meter:

SRM 310

This SRM 310 uses parallel electrodes and concentric

rings to accurately measure RTT, RTG, or resistivity for

periodic verification, factory audits or test lab evaluation

of product.

This meter is designed to verify incoming materials such

as floor mats, table mats, bins and shelving in static con-

trolled areas. Work surfaces, bags, wrist straps, footwear,

packaging materials, garments, and ESD chairs can also

be tested with the device.

The SRM310 meets periodic test requirements per Com-

pliance Verification ESD TR53 and conforms to ANSI/EOS/

ESD (S4.1, S7.1, S12.1, S2.1).

Ohm Metrics test and measurement products, from

Transforming Technologies, are useful, reliable tools for

characterizing and identifying the electrical resistance of

materials and the performance of personal grounding

products.

 All Ohm Metrics products are designed to support

ESDA Compliance Verification TR53.

 All Ohm Metrics products can be calibrated.

 All Ohm Metrics test and measurement products are

warranted for 1 full year.

Operation

Battery Installation

Remove screws from back cover using a Phillips style screw

driver and detach from monitor. Insert the included 9 volt

battery, replace back cover and secure with screws.

 Only new and valid batteries can be used.

 Low battery power is indicated when the last Red LED

flashes during measurement. Stop testing and replace

with fully charged 9v battery.

Measuring Surface Resistance

1. To measure the surface resistance of an object, hold the

instrument to the surface and press the TEST” button.

2. The value is indicated by colored LED lights.

3. Refer to “LED Indication Guide” on Page 4 for LED.

Other Measurements

By connecting the optional SR0055,Surface Resistance

Probes, it’s possible to measure other forms of resistance

such as “point to point” resistance ,or “volume resistance”.

Contact Transforming Technologies for Surface Resistance

Probes, Model number: SR0055.

Operation Cont.

Measuring Resistance to Ground

For surface resistant probes:

1. Plug in the supplied grounding cord into socket of the

meter. The associated internal electrode is now discon-

nected.

2. Connect the opposite end of the grounding cord to

“ground”.

3. Use Steps 1-3 in “Measuring Surface Resistance” to

complete the test.

Measuring Resistance Between Two Points

Note: Must have surface resistant probes:

1. Position the two 5lb probes 3 ft. away from the surface

to be measured.

2. Attach the 3.5mm leads to meter and connect the ba-

nana plug to probes.

3. Press power button to test.

NOTE: The voltage will automatically change to either 10v

or 100v depending on the resistivity of the material.

Refer to the EOS/ESD Specifications. EOS/ESD-S4.1, ANSI

-ESD S7.1 and EOS/ESD-S11.11-1993

Parts Included List

1. SRM 310

2. Carrying bag

3. 9V battery (installed in domestic shipment)

4. Grounding cord

5. User’s manual

Calibration

The recommended calibrating interval is 12 months.

Notice

This instrument is not approved for measurements in explo-

sion hazard areas. High electrostatic charges or measuring

highly charged materials might damage the instrument.

Using the instrument in power plants is not permitted.

LED Indication Guide

The LED lights on the meter indicates how much resistance a

surface has and if it is “Conductive”, “Dissipative” or

“Insulating” by flashing colored LED lights.

Alarm Indications

Display Resistance Indicates

GREEN <-105K Conductive

YELLOW 106-1011 M Dissipative

RED 1012 M-> Insulating

Service and Warranty

Transforming Technologies, LLC provides a limited war-

ranty for the Model SRM310. All new products are guaran-

teed to be free from defects in material and workmanship for

a period of one (1) year from the date of shipment. Liability

is limited to servicing (after evaluating, repairing or replac-

ing) any product returned to Transforming Technologies. The

company does not warrant damage due to misuse, neglect,

alteration or accident. In no event shall Transforming Tech-

nologies be liable for collateral or consequential damages.

To receive service under warranty, please contact Trans-

forming Technologies Technical Support.

Product Specifications

Specifications:

Dimensions/Weight 5.15” H x 2.50” W x 1.8” D /

8.46 oz

Test range: 103-1012

Test voltage: 10V/100V(automatic ranging)

Accuracy + 5%

Power Supply 9V-Battery (PP3)

Or rechargeable Battery

Probes: Internal parallel probe jacks.

External probes for SR0055

(internal probes are switched off)

Product Number

SRM310 Resistance Meter

SR0055 Probes (two required)

About Transforming Technologies

Since 1998, Transforming Technologies has helped

electronic manufacturing facilities to protect their prod-

ucts and processes from the many serious problems as-

sociated with static electricity.

Transforming Technologies offers a wide range of

unique and outstanding products to detect, protect,

eliminate and monitor electrostatic charges. Our prod-

ucts are integral components of an effective static con-

trol program.

Phone: 419-841-9552

Fax: 419-841-3241

E-mail: info@transforming-technologies.com

3719 King Rd.

Toledo, Ohio 43617

TRA NSF ORMIN G TEC HNOL OGI ES, LLC

Inhaltsverzeichnis

Andere Transforming Technologies Messgerät Handbücher

Transforming Technologies

Transforming Technologies GTS600 Bedienungsanleitung

Transforming Technologies

Transforming Technologies Ohm Metrics SRM330 Bedienungsanleitung

Transforming Technologies

Transforming Technologies Ohm Metrics EFM115 Bedienungsanleitung

Transforming Technologies

Transforming Technologies Ohm Metries SRM320 Bedienungsanleitung

Transforming Technologies

Transforming Technologies Resistance RANGER CM2800 Bedienungsanleitung

Transforming Technologies

Transforming Technologies WST 200 Bedienungsanleitung

Transforming Technologies

Transforming Technologies OhmMETRICS EFM250 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung