Transition Networks SISTF101X-241-LRT Bedienungsanleitung
4-port 10/100TX + 1 port 100FX Industrial Switch
User Manual
SISTF101X-241-LRT
V1.00
Oct., 2010
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-131 International: 00-1-952-941-7600
FCC Warning
This Equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. It may cause
harmful interference to radio communications if the equipment is not installed and used
in accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Content
FCC Warning ...................................................... ii
CE Mark Warning................................................ ii
Overview .............................................................1
Introduction............................................................... 1
High-Speed Transmissions ............................................... 1
Dual Power Input............................................................... 1
Flexible Mounting .............................................................. 1
Advanced Protection ......................................................... 1
Wide Operating Temperature............................................ 2
Easy Troubleshooting........................................................ 2
Features ................................................................... 3
Technical Specification ............................................ 4
Packing List .............................................................. 7
Safety Precaution..................................................... 7
Hardware Description .........................................8
Front Panel............................................................... 8
Top View .................................................................. 9
LED Indicators........................................................ 10
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-131 International: 00-1-952-941-7600
Ports ....................................................................... 11
Cabling ................................................................... 13
Wiring the Power Inputs ......................................... 14
Wiring the Fault Alarm Contact .............................. 15
Mounting Installation .........................................16
DIN-Rail Mounting .................................................. 16
Wall Mount Plate Mounting .................................... 18
Hardware Installation ........................................19
Installation Steps.................................................... 20
Troubleshooting ................................................21
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
1
Overview
Introduction
The 4 10/100TX + 1 100FX Industrial Switch is a cost-effective solution and meets the high
reliability requirements demanded by industrial applications.
High-Speed Transmissions
The 4 10/100TX + 1 100FX Industrial Switch provides you with Fiber port for your fiber optic
cable to make a long-distance connection. The 4 10/100TX + 1 100FX Industrial Switch
includes a switch controller that can automatically sense transmission speeds (10/100 Mbps).
The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and
a crossover cable is not required. All Ethernet ports have memory buffers that support the
store-and-forward mechanism. This assures that data is properly transmitted.
Dual Power Input
To reduce the risk of power failure, the 4 10/100TX + 1 100FX Industrial Switch provides +12 ~
+48 V
DC
dual power inputs. If there is power failure, 4 10/100TX + 1 100FX Industrial Switch will
automatically switch to the secondary power input.
Flexible Mounting
4 10/100TX + 1 100FX Industrial Switch is extremely compact and can be mounted on a
DIN-rail or a panel, so it is suitable for any space-constrained environment.
Advanced Protection
The power line of 4 10/100TX + 1 100FX Industrial Switch supports up to 3,000 V
DC
EFT
protection, which secures equipment against unregulated voltage and makes systems safer
and more reliable. Meanwhile, 6,000 V
DC
ESD protections for Ethernet ports make 4 10/100TX
+ 1 100FX Industrial Switch more suitable for harsh environments.
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
2
Wide Operating Temperature
The operating temperature of the 4 10/100TX + 1 100FX Industrial Switch supports the wide
operating temperature in the range between -40 ~ 75
o
C. With such a wide range, you can use
the 4 10/100TX + 1 100FX Industrial Switch in some of the harshest industrial environments
that exist.
Easy Troubleshooting
LED indicators make troubleshooting quick and easy. Each 10/100 Base-TX port has 2 LEDs
that display the link status, transmission speed and collision status. Also the three power
indicators P1, P2 and Fault help you diagnose immediately.
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
3
Features
Provides 4 x 10/100TX Mbps Ethernet ports
Provides 1 SC/ST fiber optic port
TX ports support full/half duplex flow control
Supports MDI/MDI-X auto-crossover
Supports surge (EFT) protection 3,000 V
DC
for power line
Supports 6,000 V
DC
Ethernet ESD protection
Provides broadcast storm protection
Embedded switch controller supports auto-negotiation
Supports store & forward transmission
Supports redundant +12 ~ +48 V
DC
power input
Provides flexible mounting: DIN-rail, Wall Mounting
Supports operating temperatures from -40 ~ 75
o
C
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
4
Technical Specification
The technical specifications of the Industrial Switch are listed as follows.
Communications
Compatibility
IEEE 802.3, 802.3u, 802.3x
LAN
10/100Base-TX, 100FX
Transmission Distance
Multi-Mode Fiber 2KM
(50/125 m ~ 62.5/125 m)
Single-Mode Fiber 30KM (9/125 m)
UTP/STP up to 100 meters
Transmission Speed
Up to 100 Mbps
Broadcast Storm Rate Limit 200pps (@ 100Mbps), 20pps (@ 10Mbps)
Interface
Connectors
4 x RJ-45
1 x SC or ST type 100M fiber
6-pin removable screw terminal (power & Relay)
LED Indicators
Unit: P1, P2, Fault
Ethernet port: Link/Active, Full Duplex/Collision
Power
Power Consumption
4 10/100TX + 1 100FX model: 4.44 Watts max.
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
5
Power Input
2 x Unregulated +12 ~ 48 V
DC
Fault Output
1 Relay Output
Mechanism
Dimensions (WxHxD)
30 x 95 x 140
Enclosure
IP30, Metal shell with solid mounting kits
Mounting
DIN rail, Wall Mount
Protection
ESD (Ethernet)
6,000 V
DC
Surge (EFT for power)
3,000 V
DC
Power Reverse
Yes
Environment
Extend Operating Temperature
-40 ~ 75
o
C (-40°F~167°F)
Operating Humidity
5% ~ 95% (non-condensing)
Certifications
Safety
UL508, cUL, CE EN60950-1
Class1 / Division 2
EMC
FCC Class A
Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6
CE EN61000-4-2 (ESD)
CE EN61000-4-3 (RS)
CE EN61000-4-4 (EFT)
CE EN61000-4-5 (Surge)
CE EN61000-4-6 (CS)
CE EN61000-4-8 (Magnetic Field)
CE EN61000-4-11 (Voltage DIP)
CE EN61000-6-2
CE EN61000-6-4
Free Fall
IEC60068-2-32
Shock IEC60068-2-27
Vibration IEC60068-2-6
Inhaltsverzeichnis
Andere Transition Networks Schalten Handbücher
Transition Networks
Transition Networks E-TBT-HB-1004 Bedienungsanleitung
Transition Networks
Transition Networks SM12DP2XA-NA Bedienungsanleitung
Transition Networks
Transition Networks E-TBT-HB-0403 Bedienungsanleitung
Transition Networks
Transition Networks E-TBT-HB-1002 Bedienungsanleitung
Transition Networks
Transition Networks LAN MASTER 33022.B Bedienungsanleitung
Transition Networks
Transition Networks SM24TBT2DPA Bedienungsanleitung
Transition Networks
Transition Networks SISGM1040-284-LRT Bedienungsanleitung
Transition Networks
Transition Networks E-FX-HB-0800 Bedienungsanleitung
Transition Networks
Transition Networks SESPM1040-541-LT Series Bedienungsanleitung
Transition Networks
Transition Networks SISTM10xx-162-LR(T) Bedienungsanleitung
Transition Networks
Transition Networks SISPM1040-384-LRT-C Bedienungsanleitung
Transition Networks
Transition Networks SM TAT4X Series Bedienungsanleitung
Transition Networks
Transition Networks SM24DPa Bedienungsanleitung
Transition Networks
Transition Networks Milan MIL-SM2401MAF Bedienungsanleitung
Transition Networks
Transition Networks SM4T4DPA Bedienungsanleitung
Transition Networks
Transition Networks PSV-2/14-45 Bedienungsanleitung
Transition Networks
Transition Networks MIL-L100i Bedienungsanleitung
Transition Networks
Transition Networks SM16TAT2SA Bedienungsanleitung
Transition Networks
Transition Networks E-MUX-SA05 Bedienungsanleitung
Transition Networks
Transition Networks SISTP1040-342-LRT Bedienungsanleitung
