Transition Networks SM12DP2XA Bedienungsanleitung

Transition Networks SM12DP2XA Quick Start Guide

33750 Rev. D https://www.transition.com Page 1of 2

SM12DP2XA Managed Gigabit Ethernet Fiber Switch Quick Start Guide

The SM12DP2XA L2+ Managed Switch is a next-generation Fiber Switch offering full suite of L2 features and

additional 10GbE uplink connections. Advanced L3 features such as Static Route deliver better cost performance

and lower total cost of ownership in Enterprise networks or backbone via fibber or copper connections.

The SM12DP2XA provides 12 GbE SFP ports, 2 RJ45 ports, 2 10GbE SFP+ ports and RJ45 Console port with built-in

AC and DC dual power supplies. SM12DP2XA provides front access to all data and management ports in a

compact form factor that facilitates desktop, wall-mount, or rack-mount installations.

See the Install Guide for important Cautions and Warnings, Compliance and Safety Statements, Key Features,

Specifications, Front Panel, Site Preparation, Installation, Cabling, Unpacking, Mounting, Connecting to Power,

Initial Switch Configuration, and Troubleshooting, Warranty, Support and Compliance information.

Unpacking: 1. Carefully unpack all SM12DP2XA contents. 2. Verify receipt of all SM12DP2XA components.

Contact your sales representative if any items are missing. 3. Place the SM12DP2XA and related materials near

the install location. 4. Save the SM12DP2XA shipping carton and packing materials for possible future use.

Front Panel: The switch front panel contains the power inputs, ports, LEDs and RESET button.

1000BASE-T Ports: The switch contains 10/100/1000BASE-T RJ-45 ports. All RJ-45 ports support automatic

MDI/MDI-X operation, auto-negotiation and IEEE 802.3x auto-negotiation of flow control, so the optimum data

rate and transmission can be selected automatically.

SFP and SFP+ Transceiver Slots: The switch supports Small Form Factor Pluggable (SFP) transceiver slots port 1 to

port 12, and port 15 to port 16 are 10G SFP+. In the default configuration, if an SFP transceiver (purchased

separately) is installed in a slot and has a valid link on the port, the associated RJ-45 port is disabled. The optional

Gigabit SFP transceiver can be used for a backbone connection between switches, or for connecting to a

high-speed server. See the specific SFP manual for important cautions and warnings.

CONSOLE Port: The switch has one RJ-45 CONSOLE port for CLI access via the provided RS232 DB9 to RJ45 Cable.

Note: Cross-over cabling to the Console port is not supported.

Front Panel LEDs: The switch includes a LED panel for system and port indications that simplify installation and

network troubleshooting. See the Install Guide for Port Status LED and System Status LED details.

Transition Networks SM12DP2XA Quick Start Guide

33750 Rev. D https://www.transition.com Page 2of 2

RST (Reset) Button: press and hold for 2-7 seconds to reset or 7-12 seconds to restore to factory defaults:

Task

Press RST button for

SYS LED Behavior

Port Status LED Behavior

Reset the Switch

2 ~ 7 seconds

Blinking Green

All LEDs OFF

Restore to Defaults

7 ~ 12 seconds

Blinking Green

All LEDs stay ON

Mounting: Mount the switch in a standard 19-inch equipment rack, on a desktop, or shelf; see the Install Guide.

Cabling: Make sure that the cables are suitable for your operating environment. For fiber optic connections, use

50/125 or 62.5/125 micron multimode fiber or 9/125 micron single-mode fiber. For copper connections, use UTP

for RJ-45 connections. For 1G bps connections use Category 5, 5e, 6, or 6a.

Connecting to Power: The SM12DP2XA front panel has two power inputs for power

redundancy; the switch has a 100~240 VAC power socket for AC power Input and a

24-48 VDC power input via the terminal block. Using both Power Supplies provides

power failover when power supplies are connected to different circuits to. With fiber

and copper cabling completed, and AC and/or DC power applied, the port LEDs light,

the SYS LED flashes, the AC and/or DC LEDs light and the SYS LED goes from flashing

to steadily lit. See the Install Guide for Connecting to an AC and/or DC Power source.

Initial Switch Configuration: Initial switch configuration can be via CLI or web browser. The factory defaults are

IP Address: 192.168.1.77, User Name: admin, and Password: admin.

CLI Configuration: The command-line interface (CLI) is a text-based interface

that you can access the CLI through either a direct serial connection to the

device or a Telnet session. An RJ-45 cable is used for connecting a terminal or

terminal emulator to the SM12DP2XA RJ-45 port to access the CLI. Attach the

RJ-45 serial port on the switch front panel to the cable for Telnet/CLI

configuration. Attach the other end of the DB-9 cable to a PC running Telnet.

See the CLI Reference for initial switch configuration via CLI.

Web UI Configuration: The left-hand menu contains two main tabs (Switch and

DMS) each with several sub-tabs for configuring and monitoring the switch’s

major functions. The major Switch tab functions include System, Ports, DHCP,

Security, VLAN, QoS, Diagnostics, and Maintenance. The DMS (Device

Management System) functions are DMS Mode, Graphical Monitoring,

Management, and Maintenance. See the Web User Guide for initial switch

configuration via web browser.

Related Information: Related manuals include the SM12DP2XA Install Guide 33751, Web User Guide 33752, and

CLI Reference 33753. For Drivers, Firmware, etc. go to the Product Support webpage (logon required).

For Manuals, Brochures, Data Sheets, etc. go to the Support Library (no logon required). For SFP manuals see

Transition Networks SFP webpage. See the DC Power Supply page for more information.

Contact: Transition Networks | 10900 Red Circle Drive | Minnetonka, MN 55343 USA |

tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322 |

[email protected]om |techsupp[email protected] |customerservice@transition.com

Andere Handbücher für SM12DP2XA

Inhaltsverzeichnis

Andere Transition Networks Schalten Handbücher

Transition Networks

Transition Networks SM24DPB Bedienungsanleitung

Transition Networks

Transition Networks SM TAT4X Series Bedienungsanleitung

Transition Networks

Transition Networks SISPM1040-3166-L Bedienungsanleitung

Transition Networks

Transition Networks LANMaster T8 Bedienungsanleitung

Transition Networks

Transition Networks E-MUX-SA05 Bedienungsanleitung

Transition Networks

Transition Networks SISPM1040-582-LRT Bedienungsanleitung

Transition Networks

Transition Networks E-TBT-HB-1004 Bedienungsanleitung

Transition Networks

Transition Networks SM8TAT2SA-DC Bedienungsanleitung

Transition Networks

Transition Networks SESPM1040-541-LT Series Bedienungsanleitung

Transition Networks

Transition Networks SISPM1040-384-LRT-C Bedienungsanleitung

Transition Networks

Transition Networks SISTM1040-262D-LRT Bedienungsanleitung

Transition Networks

Transition Networks SM24-100SFP-AH Bedienungsanleitung

Transition Networks

Transition Networks SM24DP4XA Bedienungsanleitung

Transition Networks

Transition Networks mil-sm8dpa Handbuch

Transition Networks

Transition Networks SISPM1040-582-LRT Bedienungsanleitung

Transition Networks

Transition Networks SM4T4DPA Bedienungsanleitung

Transition Networks

Transition Networks Milan MIL-SM8002TG Bedienungsanleitung

Transition Networks

Transition Networks SISGM1040-284-LRT Bedienungsanleitung

Transition Networks

Transition Networks SISPM1040-384-LRT-C Bedienungsanleitung

Transition Networks

Transition Networks E-FL-HB-0400 Bedienungsanleitung

Transition Networks

Transition Networks MIL-S4800 Bedienungsanleitung

Transition Networks

Transition Networks STACKMASTER TX12 Bedienungsanleitung

Transition Networks

Transition Networks SISTG1040-242-LRT Bedienungsanleitung

Transition Networks

Transition Networks SM8TAT2SA Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung