Treasure Garden AG28 Series Montageanleitung

Assembly and Operation Guide

AG28 CANTILEVER

AG28 11’ octagon

Thank you for purchasing Treasure Garden’s AG28 Cantilever.

Please remove all contents from the package, inspect and review checklist.

Some parts may be included in the styrogoam packaging.

Do not discard any packaging or box until assembly is complete.

CHECKLIST

Base Shell Base Lid

(1) Collar

(1) Clamp

(1) Stem

(2) Bolts

(1) Hexagon

Wrench

(1) Steel Wrench

Spring Loaded

Rib End Cap (8)

REQUIRED FOR ASSEMBLY:

• 200 lbs. of all purpose sand (not included).

NOTE: Avoid allowing sand into center of base shell.

A - (1) Base Shell and Base Lid K - (1) Canopy

B - (1) Collar Base Stem Assembly L - (1) Removable Crank Handle

C - (1) Locking Rotation Knob M - (1) Socket A - To extend arm

D - (1) Main Frame N - (1) Socket B - To open canopy

E - (1) Housing O - (1) Crank Handle Storage

F - (1) Outer Frame Arm P - (1) Light Adapter (light sold separately)

G - (1) Arm Connector Q - (8) Spring Loaded Rib End Cap

H - (1) Inner Frame Arm R - (1) Valance (optional)

I - (1) Bottom Pole S - (1) Hardware Assembly

J - (1) Gemel Hinge T - (1) Protective Cover

STEP 1BASE ASSEMBLY

Select area to set base and place in desired location.

Remove base lid from base shell and set aside (Fig. 1). Insert the base stem into the base

shell (Fig. 2). Turn collar base stem in a clockwise motion to engage threading. Fill base

shell with all-purpose sand (not included) (Fig. 3). NOTE: Base weight holds up to 200 lbs.

of sand. Remove the base stem carefully and avoid allowing sand into the center of the

base shell (Fig. 4). IMPORTANT: Do not allow sand to spill into the center of the base

(Fig. 4) as it will interfere with collar base stem installation. Place base lid back onto base

shell.

CAUTION: Fully assembled, the AG28 umbrella weighs over 300 lbs. Moving the

umbrella fully assembled will increase the risk of damage to your umbrella and can

cause serious injury. We recommend a two-person team to assemble the umbrella.

(Fig. 1)

(Fig. 3)

Avoid allowing sand into

the center of the base

shell.

(Fig. 2)

(Fig. 4)

IMPORTANT:

Prior to assembly it is important to decide on the location of the umbrella.

· Allow ample height to avoid damage to your umbrella during assembly and usage.

· Choose a location that is level and sturdy.

· Avoid any sloping of soft ground.

· Consider a location that will maximize the umbrella’s 360° rotating function. Placing the

umbrella between two entertaining areas is idea.

STEP 2ASSEMBLE COLLAR BASE STEM

Re-insert the base stem into the base shell. Turn collar base stem in a clockwise

motion to engage threading (Fig. 5). Insert steel wrench provided into holes on

top of stem and tighten (Fig. 6). NOTE: To avoid damage to your base, do not

over-tighten base stem. Insert clamp into base stem (Fig. 7). Attach collar to

top of the base stem by engaging threading (Fig. 8). Do not completely tighten

before inserting AG28 umbrella frame.

Stem Steel

Wrench

Clamp

Collar

(Fig. 7)

(Fig. 5) (Fig. 6)

(Fig. 8)

Socket BSocket B

(Fig. 10)(Fig. 9)

(Fig. 11)

(Fig. 12)

Socket A

Stopper

STEP 3ASSEMBLE FRAME

To prevent scratching frame during assembly, lay umbrella parts on soft surface.

Remove packaging from umbrella. NOTE: Keep canopy structure and frame arm strapped.

Attach the bottom pole into the housing, bottom pole only fits one way. Line up holes and

secure the two bolts with hexagon wrench (Fig. 9). Insert crank handle into socket A of

housing (Fig. 10). Crank inner frame arm counter-clockwise until arm stops. To prepare

base for umbrella, release collar base stem by turning the collar counter-clockwise

(Fig. 11). Lift and insert umbrella frame into collar base stem (Two Person Team

Required). Secure position by tightening the collar in a clockwise direction (Fig. 12).

NOTE: Cantilever will open counter-clockwise but not designed to be operated in that

matter.

(Fig. 13) (Fig. 14)

(Fig. 15)

Socket A

Socket BSocket B

Socket B

Socket A

STEP 5TILTING UMBRELLA

To Tilt Canopy Vertically:

IMPORTANT: PRIOR TO USING VERTICAL AND HORIZONTAL TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Insert crank handle into socket A (Fig. 15) and slowly crank counter-clockwise to desired

degree of vertical shade.

STEP 4OPENING UMBRELLA

To Open and Extend Arm:

Insert crank handle fully into socket A (Fig. 13), crank handle will snap into place, then

slowly crank the handle clockwise until crank handle stops and arm is fully extended

outward. CAUTION: Arm must be fully extended before retracting. Do not over crank, as it

will damage your umbrella.

To Open Canopy:

Insert crank handle fully into socket B (Fig. 14), crank handle will snap into place, then

slowly crank the handle clockwise until canopy is completely open and hub is inserted

under center pole and crank handle stops.

STEP 6ROTATING UMBRELLA

Pull out the locking rotation knob to disengage lock (Fig. 16) and place second hand on

Socket B crank system simultaneously to rotate in either direction (Fig. 17). After desired

location is reached, release rotation knob to lock into one of the 12 preset locking positions.

Socket A Socket BSocket B

(Fig. 16)

(Fig. 17)

(Fig. 18) (Fig. 19)

(Fig. 20) (Fig. 21)

STEP 7LIGHT ADAPTER FEATURE

To ATTACH Umbrella Light: (sold separately)

Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 18). After loosening, pull down light adapter post (Fig. 19) to attach the umbrella light

(sold separately).

To OPEN and ATTACH Light:

Open the umbrella light by holding firmly with one hand and then depress the clamp release

button with the other hand to release the clamp lock. Open up the light and clasp around

the light adapter post (Fig. 20). Snap to close (Fig. 21).

To REMOVE Light and CLOSE adapter:

Hold the umbrella light, depress the clamp release button to release the clamp lock.

Remove umbrella light and gently push up the light adapter post back into umbrella runner

and tighten turning clockwise (Fig. 18). NOTE: It is not necessary to remove light to close

umbrella.

STEP 8CLOSING UMBRELLA

NOTE: Prior to closing ensure that the canopy is in a level (non-vertical tilt) position.

Insert crank handle fully into socket B (Fig. 22), crank handle will snap into place, then

slowly crank the handle counter-clockwise until canopy is completely closed.

Insert crank handle fully into socket A (Fig. 23), crank handle will snap into place, then

slowly crank the handle counter-clockwise until crank handle stops and arm has fully

retracted to a closed position.

Properly store umbrella when not in use. Close umbrella, tie string around canopy and

cover umbrella with provided protective cover.

CARE AND MAINTENANCE

TO PROPERLY FOLD CANOPY:

The canopy will last longer if you fold it as it was packed and shipped. This technique is

similar to the way a parachute is folded and is especially important when folding the canopy

for seasonal storage or when left in the closed position for an extended period of time.

Using this technique at all times will significantly extend the life of the canopy.

• When the umbrella has been fully closed, stand in front of the canopy

structure and begin the folding process by pulling out two panels

opposite the main frame. Pull the two panels together and roll tight into

the canopy.

• Once rolled tight, pull adjacent panels out one at a time and fold to the

center, alternating sides until all the panels have been pulled out from

the arms and folded into the center.

• Tie string around canopy and cover umbrella with provided protective

cover.

(Fig. 23)(Fig. 22)

Socket BSocket B

Socket B Socket A

SAFETY PRECAUTIONS

• Close and store the umbrella in windy conditions or when a storm approaches.

Never allow the umbrella to flap in the wind; this could damage the canopy.

• Do not leave open umbrella unattended. If damage occurs, this is not covered

by the warranty.

• When adjusting the umbrella, make sure that no person(s) or item(s) are close to the

umbrella. This is important to prevent injury or material damage.

CARE AND MAINTENANCE

• When not in use, close and cover umbrella with provided protective cover.

• Store rechargeable battery pack and power supply in dry place.

• Allow a wet canopy to dry while in open position, but do not leave unattended.

• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.

• Wipe sliding marks on the aluminum poles with a damp cloth.

Winter Storage:

• Store in a dry place.

After the Winter:

• Check the condition and function of the umbrella. Any defects must be repaired by a

professional.

Andere Handbücher für AG28 Series

Inhaltsverzeichnis

Andere Treasure Garden Gartenmöbel Handbücher

Treasure Garden

Treasure Garden AKZ PLUS Montageanleitung

Treasure Garden

Treasure Garden AG25T Montageanleitung

Treasure Garden

Treasure Garden Cantilever AKZ13 Montageanleitung

Treasure Garden

Treasure Garden Glide Tilt UM970 Montageanleitung

Treasure Garden

Treasure Garden UM800xSL Montageanleitung

Treasure Garden

Treasure Garden AKZ Cantilever Montageanleitung

Treasure Garden

Treasure Garden UM801 Montageanleitung

Treasure Garden

Treasure Garden Halo Bedienungsanleitung

Treasure Garden

Treasure Garden BSK120 Montageanleitung

Treasure Garden

Treasure Garden Starlux Collar Tilt Montageanleitung

Treasure Garden

Treasure Garden UB753HT Montageanleitung

Treasure Garden

Treasure Garden UM920 Montageanleitung

Treasure Garden

Treasure Garden QUAD PULLEY LIFT UM8091 Montageanleitung

Treasure Garden

Treasure Garden UM8100 Montageanleitung

Treasure Garden

Treasure Garden BASE-13-00 Bedienungsanleitung

Treasure Garden

Treasure Garden AD45 Cantilever Montageanleitung

Treasure Garden

Treasure Garden COMMERCIAL UCP409 Montageanleitung

Treasure Garden

Treasure Garden UM921 Bedienungsanleitung

Treasure Garden

Treasure Garden AG19A Montageanleitung

Treasure Garden

Treasure Garden AG25TSQ Montageanleitung

Treasure Garden

Treasure Garden UM8811RT Montageanleitung

Treasure Garden

Treasure Garden AG5A Montageanleitung

Treasure Garden

Treasure Garden UM810 Series Leitfaden

Treasure Garden

Treasure Garden CP908 Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

PATIOJOY

PATIOJOY HW70624 Bedienungsanleitung

LAZBOY

LAZBOY 780-01291206-9 Bedienungsanleitung

RUSTA

RUSTA RHODOS Bedienungsanleitung

Patioflare

Patioflare Melody PF-10129 Series Bedienungsanleitung

Agio

Agio 2127092 Bedienungsanleitung

vita

vita Fairfeld Arbor Bedienungsanleitung

Seasons Sentry

Seasons Sentry UMB-822120 Leitfaden

JARDINICO

JARDINICO JCP.501 Bedienungsanleitung

Outdoor Home

Outdoor Home UMB-879530 Installationsanleitung

weinor

weinor Großschirm Lugano Series Handbuch

Costway

Costway PATIOJOY OP70681 Bedienungsanleitung

Atleisure

Atleisure seasons SENTRY UMB-546980M Leitfaden

Broyhill

Broyhill A222011906 Bedienungsanleitung

Alice's Garden

Alice's Garden TOUQUET PU2X3 Bedienungsanleitung

CARAVITA

CARAVITA SAMARA 2012 Bedienungsanleitung

Costway

Costway NP10245 Bedienungsanleitung

B&Q

B&Q Tobago Bedienungsanleitung

Extremis

Extremis INUMBRINA 380 Bedienungsanleitung