Tree TR-KS-C Bedienungsanleitung

Teeth Whitening Light

User Guide

TR-KS-CTR-KS-C

CONTENT

1.DESCRIPTION---------------------------------------2

2.FEATURES--------------------------------------------2

3.INSTALLATION--------------------------------------3

4.OPERATION-------------------------------------------4

5.TECHNICAL PARAMETERS-----------------------6

6.PRECAUTION------------------------------------------6

7.MAINTENANCE---------------------------------------6

8.TRANPORTATION AND STORAGE---------------7

9.MALFUNCTION AND SOLVING METHOD-----8

10.WARRANTY REGISTRATION FORM------------9

1.DESCRIPTION

The whitening device D6GG is a new type whitening

Technology, based on the condition of Strong blue LED light

and whitening kit accelerant. By the character of

nanometerpellet on the surface and light decomposition,

activate the most H2O2 in short order on low or normal

temperature. Produce mass oxygen atomy permeate teeth and

decompose color molecule, to meet the effect of teeth

whitening.

2.FEATURES

(1). The specifical wavelength and high density light speed

Catalyze whitening gel.

(2). 6 powerful LED tubes emit a high intensive cold blue light

(3). Special design, innocuous silica gel muzzle, make sure

stopping intersectional infection.

(4). The new model of power supply make sure steady power

output and long-time continuous working even in some

cities and places with mutative voltage.

(5). Time display screen shows the whitening time clearly to

both dentist and patient.

3.INSTALLATION

4.OPERATION

4.1.Button Operation

(1). ON/OFF : Press ON/OFF button to set the unit working.

The power light and standby light on.

(2). Time Setting (UP/DOWN): According to patient’s

condition,doctor can increase or decrease the time level

from 1~20mins.

(3). PAUSE: Press this button to set the unit to h-i standby

mode. Ready indicator light is off, and standby indicator

light is on.

(4). START: Press this button to set the unit to send

LED-luminescence

(5). HIGH/LOW: Press this button to chiise light intensity as

high mode or low mode

4.2Application

(1). Connect power source and turn it on.

(2). The machine is in stand-by after a prompt sound of

buzzing. Position “ON/OFF” would be showed glinting “20”.

(3). Adjust the operation time by “time up/ time down”, adjust

range from 1 to 20 minutes.

(4). Alarm sound after pressing “START”, and a blue light

transmitted from the light guide of terminal, time display is

counting down.

(5). Alarm sound for 5 seconds after countdown finished, blue

light extinguish.

4.3Operation Notice

(1). Please don’t turn the poer OFF immediately once blue

light extinguished, the machine will turn to heat-emiting

and cooling condition according to preset procedure

(2). Light guide terminal is made of the polyester material

which is smooth and transparent. Please do not clean it

with the incisive object.

(3). Please don’t put heavy item on the power cable, and

always keep the device far from heat source.

(4). Turn it off without using it.

5.TECHNICAL PARAMETERS

(1). Power Supply: AC100-240V, 50/60HZ

(2). Light Size: 33*74mm2

(3). Light Timing:0~20 mins

(4). Power Instability: < 1%

(5). Working Method: time output & continuous working

(6). Coupling: polyester monowave

6.PRECAUTION

(1). User should wear goggle during operation of

the device.

(2). Always keep treatment room ventilated during operation

of the device.

7.MAINTENANCE

(1). Make regular back-check and keep machine surface clean.

(2). This machine is precise optical equipment, it should be

used in the clean and dry place without atomy.

(3). Environment condition: no atomy, no shock, no dampness.

(4). Treatment room temperature 16-20℃, humidity <40%

(5). Clean up transparent head after each treatment by alcohol

(avoid clean by sharp object), make sure it’s clean to avoid

cross infection between patients. Silica gel muzzle can be

Sterilized.

(6). If any “error” show on the display, turn off power and stop

operating immediately, ask for help pr advice from

professional technician.

(7).Change the warter or sand inside the base regularly.

8.TRANSPORTATION AND STORAGE

(1).Lay lightly during transportation, avoid strong shake.

(2). Storage condition:

a. Ambiance temperature: -40~50℃

b. Relative humidity: <95%

9.MALFUNCTION AND SOLVING

METHOD

No.

MALFUNCTIO

RESOLVE

Turn on the

machine, no

working

a. Check if the power connect well

b. Power is in bad condition,

contact with supplier for help

and advice

Light out putport

without voltage

a. Power is in bad condition,

contact with supplier

Light output

power decline

a.Cross section of LED bulb is

damaged

b. LED bulb life expired, contact

with supplier to exchange new

one

Light output port

with voltage, but

without light

output

a. LED bulb is amaged, contact

with supplier to exchange new

one.

10.WARRANTY REGISTRATION

FORM

Item Name:

Model Name:

Serial No.:

Date of Purchase:

Name:

Address:

Phone:

Email:

Name of Distributor:

Authorized Distributors:

Stamp and Signature

Inhaltsverzeichnis

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung