TRENDnet TEW-424UB Bedienungsanleitung

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the TEW-424UB on

your Apple computer with Mac OS X 10.4/10.5.

Before insert the TEW-424UB into USB port of your computer, please install

the Utility Program first. Make sure that the TEW-424UB is NOT inserted

into the USB slot.

Installation

1. Insert the TEW-424UB Driver & Utility CD into Mac’s CD-ROM Drive

2. Browse the TEW-424UB CD-ROM and go to the MAC OS X folder.

3. Click the TEW-424UB_MAC_OS_X_1148.dmg, that is TEW-424UB

driver/utility disk image file for Mac OS X.

4. Browse the disk of TEW-424UB_MAC_OS_X.dmg then go to the MacOS10.4

or MacOS10.5 folder which Mac OS X version installed on your Apple

computer.

5. Double click on the install.pkg to start the installation of the TEW-424UB

driver/utility.

6. Click “Continue” button.

7. Click “Continue” button.

8. Click “Continue” button.

9. Click “Agree” button.

10. Click “Install” button.

11. Input your password then click “OK” button.

12. The computer will restart when the installation is done, click “Continue

Installation” start the software installation.

13. When install successes, click “Restart” to reboot your computer.

14. Insert the TEW-424UB on your Mac after it’s rebooted, you will found the

“WLAN Client Utility” icon in the Dock menu. Click on the icon start the

TEW-424UB configuration.

Uninstall

1. Double click on the Unistall.command start the un-installation of the TEW-

424UB driver/utility.

2. Type in your password in Terminal windows then press “return/enter” key.

3. Finish the dirver/utility un-installation.

CONFIGURATION

The TEW-424UB for Mac OS X driver/utility supports two operation mode, either

Station mode or Access point mode, select the Station mode using the TEW-424UB

on your computer to connect to an access point; Otherwise, select the Access point

mode allow your computer to be a wireless access point with the TEW-424UB,

wireless client can connect to this computer acting as an access point and then

connect to the Internet.

Station mode

Link Status

MAC Address: Showing the MAC address of the TEW-424UB

SSID: Shows the current SSID, which must be the same on the wireless client and

AP in order for communication to be established.

BSSID: Shows the associated BSSID, which can be used to identify the wireless

access point.

Security: Shows the current encryption mode used on the wireless network.

Connection: Shows the connection state either Connected or Disconnected.

Network Type: Shows the current wireless mode used for wireless communication

either Infrastructure or Adhoc mode.

Channel: Shows the current channel for communication.

Profiles

The user can create and manage the created profiles for home, work or public areas.

Add: Adds a profile. The following screen will appear. The user can enter the

necessary information required for accessing Access Points or Wireless Router.

Edit: View and edit the existing profile.

Remove: Deletes the selected profile.

Remove: Duplicate the selected profile.

Apply: Selected a profile from list then click the Apply to connecting to the

wireless network with the profile setting.

Available Network

This available network allows the user to scan for available wireless networks (ad-

hoc wireless clients and wireless access points). It also allows the user to establish

wireless communications with an available wireless network.

Refresh: Click the “Refresh” button to rescan for available networks.

Connect: Select any one of the available wireless networks from list then click

Connect button to establishing the wireless connection.

Advanced Setting

This available network allows the user to scan for available wireless networks (ad-

hoc wireless clients and wireless access points). It also allows the user to establish

wireless communications with an available wireless network.

Wireless Mode: Select one of the following:

z802.11b - Select if you are using the 802.11b mode to connecting to wireless

AP.

z802.11g/b - Select if you are using both 802.11b/802.11g auto mode to

connecting to wireless AP wireless clients.

802.11b Preamble: Define the preamble type for 802.11b mode.

QoS Mode: Enable/Disable the QoS function on the TEW-424UB.

PSP Xlink Mode: Emable/Disable the PSP Xlink Mode on the TEW-424UB.

Fragmentation Threshold: Type the fragmentation threshold in the text box. If

packet transfer error rates are high, choose values between 256 and 2432 until

packet transfer rates are minimized. (NOTE: set this fragmentation threshold value

may diminish system performance).

RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This

value stabilizes data flow. If data flow is irregular, choose values between o and

2432 until data flow is normalized.

Refresh: Click to restore to previous saved setting.

Apply: Click to apply the new setting.

Set Defaults: Click to restore to default setting.

Andere Handbücher für TEW-424UB

Inhaltsverzeichnis

Andere TRENDnet Adapter Handbücher

TRENDnet

TRENDnet TEW-445UB Bedienungsanleitung

TRENDnet

TRENDnet HotFlash TEW-429UF Bedienungsanleitung

TRENDnet

TRENDnet TEW-509UB Bedienungsanleitung

TRENDnet

TRENDnet TE100-PCI Bedienungsanleitung

TRENDnet

TRENDnet TU-ET100C - Bedienungsanleitung

TRENDnet

TRENDnet TEW-224UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-644UB Bedienungsanleitung

TRENDnet

TRENDnet TU2-PCBUS Bedienungsanleitung

TRENDnet

TRENDnet TEW-429UB Bedienungsanleitung

TRENDnet

TRENDnet TU-ET100C - Bedienungsanleitung

TRENDnet

TRENDnet TBW-110UB Bedienungsanleitung

TRENDnet

TRENDnet TPL-302E Bedienungsanleitung

TRENDnet

TRENDnet TEW-647GA Bedienungsanleitung

TRENDnet

TRENDnet TEW-805UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-USB Bedienungsanleitung

TRENDnet

TRENDnet TEW-646UBH Bedienungsanleitung

TRENDnet

TRENDnet TEW-624UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-604UB Bedienungsanleitung

TRENDnet

TRENDnet TBW-106UB Bedienungsanleitung

TRENDnet

TRENDnet TU2-H4PC Bedienungsanleitung

TRENDnet

TRENDnet TEW-429UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-444UB Bedienungsanleitung

TRENDnet

TRENDnet TPL-406E Bedienungsanleitung

TRENDnet

TRENDnet TEW-664UB Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung