TRENDnet TU2-ET100 Bedienungsanleitung

TU2-ET100

Quick Installation Guide

Table of Contents

Version 05.24.2010

English 1

1. Before You Start

2. How to Install 2

Troubleshooting 4

1. Before You Start

•CD-ROM drive

•USB port: 2.0 or 1.1

Package Contents

System Requirements

Supported Operating Systems CPU Memory

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Windows XP (32/64-bit) /

2000 / ME / 98SE

Mac OS X (10.5)

Mac OS X (10.6)

Mac OS X (10.4)

Mac OS X (10.1-10.3)

1GHz or above

800MHz or above

300MHz or above

867MHz or above

Intel Processor

333MHz or above

300MHz or above

1GB RAM or above

512MB RAM or above

256MB RAM or above

512MB RAM or above

1GB RAM or above

• TU2-ET100

•CD-ROM (Driver)

•Multi-Language Quick Installation Guide

256MB RAM or above

2. How to Install

Note:

1. For Windows 98SE and Me and Mac OS X driver installation, refer to the user

guide on the Driver CD-ROM.

2. Do not insert the TU2-ET100 until prompted to.

Windows 7 / Vista / XP / 2000

1. Insert the Driver CD-ROM into your CD-ROM

drive.

2. Click RunAutorun.exe (Windows 7/Vista only).

3. Click Install Driver.

4. Follow the InstallShield Wizard and then click

Finish.

6. Remove the driver CD-ROM from your

computer's CD-ROM drive.

5. Click Exit.

8. Drivers will install automatically.

7. Connect theAdapter to an available USB port

of your computer.

9. Connect a RJ-45 cable from theAdapter to a

Switch, Router, or Cable/DSLModem.

Your Installation is complete.

I inserted the Driver CD-ROM into my computer's CD-ROM Drive and the

installation menu does not appear automatically. What should I do?

For Windows 7, if the installation menu does not appear automatically, click on

the Windows Icon on the bottom left hand corner of the screen, click the

“Search programs and files” box, and type D:\autorun.exe, where “D” in

“D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press

the ENTER key on your keyboard

2. For Windows Vista, if the installation menu does not appear automatically, click

Start, click the Start Search box, and type D:\autorun.exe where "D" in

"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press

the ENTER key on your keyboard.

3. For Windows 2000/XP, if the installation menu does not appear automatically,

click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is

the letter assigned to your CD-ROM Drive, and then press the ENTER key on

your keyboard.

2. Can I connect or disconnect the TU2-ET100 while the computer is on?

Yes, you can connect or disconnect TU2-ET100 while the computer is on

because the USB interface is Plug-and-Play compliant and hot-pluggable.

3. Windows is unable to recognize my hardware. What should I do?

1. Make sure your computer meets the minimum requirements as specified in

Section 1 of this Quick Installation Guide.

2. Try plugging the adapter into a different USB port.

4. Windows recognizes my new hardware, but I'm unable to connect to my

network. What should I do?

1. Verify that the RJ-45 Ethernet cable is securely connected from your switch or

router to your adapter.

2. Verify that the LEDs on your adapter are lit.

3. Verify that the TCP/IP settings are set to Obtain an IPaddress automatically.

5. How do I install this device on Windows 98SE, ME and Mac OS X?

Refer to the User Guide included on the Driver CD-ROM for installation

instructions.

If you still encounter problems or have any questions regarding the TU2-ET100, please

contact TRENDnet'sTechnical Support Department.

Troubleshooting

Andere Handbücher für TU2-ET100

Andere TRENDnet Adapter Handbücher

TRENDnet

TRENDnet TEW-644UB Bedienungsanleitung

TRENDnet

TRENDnet TPL-306E Bedienungsanleitung

TRENDnet

TRENDnet TPL-405E Bedienungsanleitung

TRENDnet

TRENDnet TPL-302E Bedienungsanleitung

TRENDnet

TRENDnet TPL-402E Bedienungsanleitung

TRENDnet

TRENDnet TBW-106UB Bedienungsanleitung

TRENDnet

TRENDnet TPL-307E Bedienungsanleitung

TRENDnet

TRENDnet TU3-ETG Bedienungsanleitung

TRENDnet

TRENDnet TEW-421PC Bedienungsanleitung

TRENDnet

TRENDnet TPL-202E - Powerline Fast EN Bridge Bedienungsanleitung

TRENDnet

TRENDnet TU2-ET100 Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

TRENDnet

TRENDnet TE-PCIW Bedienungsanleitung

TRENDnet

TRENDnet TEW-646UBH Bedienungsanleitung

TRENDnet

TRENDnet N600 Bedienungsanleitung

TRENDnet

TRENDnet TU3-ETGH3 Bedienungsanleitung

TRENDnet

TRENDnet TBW-105UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-444UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-424UB Bedienungsanleitung

TRENDnet

TRENDnet TPE-420E Bedienungsanleitung

TRENDnet

TRENDnet TEW-807ECH Bedienungsanleitung

TRENDnet

TRENDnet TEW-648UBM Bedienungsanleitung

TRENDnet

TRENDnet TEW-644UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-623PI Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung