TRENDnet TL2-E284 Bedienungsanleitung

Table of Contents

English 1

1. Before You Start 1

2. Hardware Installation 2

3. LEDs 3

4. onfigure the Switch 5

Troubleshooting 9

Version 11.05.2010

1. Before You Start

Package ontents

• TL2-E284

• Multi-Language Quick Installation Guide

• D-ROM (User's Guide)

• RS-232 cable (3 m / 9.8 ft.)

• Power ord (1.8 m / 5.9 ft.)

• Rack Mount Kit

Installation Requirements

• Web Browser: Internet Explorer (6.0 or higher)

■

• A computer with a network adapter properly installed

• AT-5e or AT-6 Network able

• The surface must support at least 2 Kg (4.4 lbs) for the Switch

• The power outlet should be within 1.8 meters (5.9 feet) of the Switch

• Make sure that there is proper heat dissipation from and adequate ventilation around the

■

Switch

• Do not place heavy objects on the Switch

Optional Equipment

• EIA standard 19” rack

• Mini-GBI module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40, TEG-MGBS80,

TEG-MGBS10D35, TEG-MGBS40D35) for Mini-GBI slots

2. Hardware Installation

Note:

Note: The Mini-GBI slots are shared with port 25 and 26 Gigabit Ethernet ports. When the

Mini-GBI slots are in use, port 25 and 26 Gigabit Ethernet ports are disabled.

1. onnect the Power ord to the TL2-E284 and

then to a power outlet.

.....

r t r t i r t t t i r r t r i L jr j r j

LiiiJ i n i I r r m “ n n

3. Verify that the following panel lights are on:

PWR(Power), SYS(System) and 10M LINK/

A T, 100M LINK/A T, 10/100M LINK/A T or

1000 LINK/A T.

I T

r'T T T 1 r'T T T 1 r T T T 1 : r j

LiiiJLiiiJLiiiJ n n

DEUTSCH

3. LEDs

PWR (Power)

24-Port 1 0/10OMbps layer 2

TLE-EBB4 Managed Switch

® Tffe no neT 1 1 I V » 11 an

il M i? it ii »

' V Ja 4 * • to ia u i» i» » a a*

I a» a*i mi 1

SYS (System)

1 0 0 0 M L IN K /A T

2 4 -P o rt 1 0 / 1 0 0 M b p s Layer 2 M a n ag ed S w itc h

TL2-E864 i

® T R € n o n e r _ .

1 i • r t i i

J lT iS Jfl

II II 17 It II M

^ ~ ~ V „

Q I « « « t a « * • io t i 14 14 II ■ n 7*

W W HI i

1 0 /1 0 0 M L IN K /A T

10/100M LINK/A T

2 4 -P o rt 1 0 /1 0 0 M b p * L ayer 2 M a nag ed S w itc h

TLB-O S4

® T P € n o n e r ____________________________________________J

1 1 1 1 f II II I I 17 11 II M

_ /

---------

^ _______________________

________

____

_ _

Q « 4 4 « ^ a 4 « • io ia 14 ii ii ao aa 14

' I

;

10M LINK/A T

Device Status LED Color Sequence Definition

PWR (Power) Green Solid Device powered On

N/A Off Device powered Off

SYS (System) Green Solid Device is ready

N/A Off Device is not ready

Ethernet LED (RJ-45) Color Sequence Definition

100M Link/ACT Green

Solid 100/200Mbps (Half/Full Duplex) onnected (per port)

Blinking 100/200Mbps (Half/Full Duplex) Data

Transmitting/Receiving (per port)

Off 10/20Mbps (Half/Full) or no connection to the port

10M Link/ACT Amber

Solid 10/20Mbps (Half/Full Duplex) onnected (per port)

Blinking 10/20Mbps (Half/Full Duplex)Data

Transmitting/Receiving (per port)

Off 100/200Mbps (Half/Full), or no connection to the port

Combo Gigabit Ethernet

(RJ-45) / Mini-GBIC LED Color Sequence Definition

1000M Link/ACT Green

Solid 2000Mbps (Full Duplex) onnected (per port)

Blinking 2000Mbps (Full Duplex) Data Transmitting /

Receiving (per port)

Off 100/200Mbps (Half/Full), 10/20Mbps (Half/Full),

or no connection to the port

10/100M Link/ACT Amber

Solid 10/20Mbps (Half/Full Duplex) or 100/200Mbps

(Half/Full Duplex) onnected (per port)

Blinking 10/20Mbps (Half/Full Duplex) or 100/200Mbps

(Half/Full Duplex) Data Transmitting/Receiving

(per port)

Off 2000Mbps (Full), or no connection to the port

DEUTSCH I FRANQAIS

4. Configure the Switch

Note:

1. Before the Switch can be configured, a Static IP address must be assigned to your computer's

network adapter in the subnet of 192.168.10.x. Since the Switch's default IP address is

192.168.10.200, make sure no other network devices are assigned an IP address of

192.168.10.200. (Refer to Troubleshooting section on how to configure T P/IP settings on your

P .)

2. There are three methods of configuring the TL2-E284: Web Browser, onsole Port and Telnet.

1. Using Web Browser

1. Open your web browser, type

http://192.168.10.200 in the Address bar, and

then press Enter. £«* y* f4vc.«. loou ]

2. Enter the User name and Password, and then

click Login. By default:

User Name: admin

Password: admin

Note:

A terminal program such as HyperTerminal is required to configure the switch via the onsole Port.

The instructions shown below demonstrates how to configure the Switch on a Windows P using

HyperTerminal.

1. onnect the RS-232 cable from a serial port on

your P to the console port on the switch.

r 'T T T 1 r 'T T T 1 r T T T 1 :U r j u

LiiiJLiiiJLiiiJ n n

2. Go to Start ^ Programs ^ Accessories ^

ommunications ^ HyperTerminal HyperTerminal

3. Enter a name, choose an icon and then click

OK.

4. Select the correct OM port

(e.g. OM1, OM2) and then click OK.

DEUTSCH

5. Enter the following, click Apply and then

click OK,

Bits per second:

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

6. Press the Enter Key,

7. Enter the User Name for login, Then press the

Enter, Then Enter the Password and then

press Enter,

By default

Password: admin

If you do not see the login prompt, please

power cycle the switch by unplugging the

power cord, wait 15 seconds and then plug it

back in,

3. Using Telnet

The Telnet function may or may not be included with your computer's operating system, For

instructions on how to enable Telnet in Windows 7/Vista, please refer to the Troubleshooting

section,

1. lick the Windows / Start icon on the bottom

left hand corner and click All Programs,

. Enter the User Name for login, Then press the

Enter, Then Enter the Password and then

press Enter, By default

Password: admin

If you do not see the login prompt, please

power cycle the switch by unplugging the

power cord, wait 15 seconds and then plug it

back in,

Confi uration is now complete

For detailed information regarding the TL2-E284 configuration and advanced settings, please

refer to User's Guide included on the Utility D-ROM, or TRENDnet's website at

http://www,trendnet,com,

Re ister Your Product

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

Andere Handbücher für TL2-E284

Inhaltsverzeichnis

Andere TRENDnet Schalten Handbücher

TRENDnet

TRENDnet TE100 PCIWN Bedienungsanleitung

TRENDnet

TRENDnet TEG-S80Dg Bedienungsanleitung

TRENDnet

TRENDnet TPE-TG44G Bedienungsanleitung

TRENDnet

TRENDnet TEG-S40TXE Bedienungsanleitung

TRENDnet

TRENDnet TEG-448WS - Switch Bedienungsanleitung

TRENDnet

TRENDnet TK-207K - KVM Switch - USB Bedienungsanleitung

TRENDnet

TRENDnet TK-423K Bedienungsanleitung

TRENDnet

TRENDnet TK-210K Bedienungsanleitung

TRENDnet

TRENDnet TEG-2248WS - Gigabit Web Smart Switch Bedienungsanleitung

TRENDnet

TRENDnet TK-409K Bedienungsanleitung

TRENDnet

TRENDnet TI-PG541i Bedienungsanleitung

TRENDnet

TRENDnet TE-SK1 Bedienungsanleitung

TRENDnet

TRENDnet TK-401R Handbuch

TRENDnet

TRENDnet TK-207K - KVM Switch - USB Bedienungsanleitung

TRENDnet

TRENDnet TEG-S80TXE - Copper Gigabit Switch Bedienungsanleitung

TRENDnet

TRENDnet TK-408K Bedienungsanleitung

TRENDnet

TRENDnet TK-804R Bedienungsanleitung

TRENDnet

TRENDnet TE100-DX16E Bedienungsanleitung

TRENDnet

TRENDnet TK-209i Bedienungsanleitung

TRENDnet

TRENDnet 21000BASE-T Bedienungsanleitung

TRENDnet

TRENDnet TPE-T80 Bedienungsanleitung

TRENDnet

TRENDnet TEG-S40SX Bedienungsanleitung

TRENDnet

TRENDnet TPE-TG80G Bedienungsanleitung

TRENDnet

TRENDnet TE100-S22 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung