TRENDnet TEW-413APBO Bedienungsanleitung

TRENDnet

TRENDware, USA

What's Next in Networking

TEW-412APBO/TEW-413APBO

Version 03.02.2005

Wireless 11g Outdoor AP Bridge

Quick Installation Guide

Guide d'installation rapide du

Pont et point d'accès sans fil 11g pour extérieur

Anleitung zur Schnellinstallation des

Drahtloser 11g Außen-AP/Bridge

Guía de instalación rápida del

AP Inalámbrico para exteriores a 11g

Table of Contents

English ......................................................................................................

Troubleshooting ........................................................................................

1. Introduction ........................................................................................

2. Connect and power up the AP/Bridge ...............................................

3. Configuring a setup computer on the LAN ........................................

4. Configuring the AP/Bridge .................................................................

5. Quick test (Post test) .........................................................................

1. Introduction

English QIG

English

When setting up the TEW-412APBO/TEW-413APBO inter-building AP/Bridge,

you will need the following:

1. A computer connected to the same network as the AP/Bridge.

2. Straight-through CAT 5 Ethernet cable with RJ-45 connectors for connecting

the router to the network and an inline power source (maximum 100 meters).

3. The following information is needed from your network system administrator.

The wireless Service Set Identifier (SSID) for your radio network. This

parameter is case-sensitive.

A unique IP address for the router (for example: 192.168.2.123), if it will not

be connected to a network with a DHCP server.

A default gateway and subnet mask if the router is not on the same subnet

as your PC.

TEW-412APBO/TEW-413APBO

Outdoor AP/Bridge

Power Over Ethernet(POE)

Power Supply

5 Ft. RJ-45

Network Cable

User’s Guide CD-ROM

Quick Installation Guide

Mount kit

N-type to N-type

Male Cable (2meters)

(TEW-413APBO only)

Hardware requirement List

Additional Requirement

TRENDnet

TRENDware, USA

What's Next in Networking

TEW-412APBO/TEW-413APBO

Version 10.04.04

Wireless 11g Outdoor AP Bridge

Quick Installation Guide

Guide d'installation rapide du

Pont et point d'accès sans fil 11g pour extérieur

Anleitung zur Schnellinstallation des

Drahtloser 11g Außen-AP/Bridge

Guía de instalación rápida del

AP Inalámbrico para exteriores a 11g

2. Connect and power up the AP/Bridge

English

Step 1 Assemble the mount kit at the back of the case. Please refer to the

attached figure in the mount kit tool bag for more details.

Step 2 Mount the AP/Bridge on a stout pole.

Step 3 Adjust the orientation of the antenna to get the maximum range (See

Figure 3.1). (Note: In some units, the directional flat panel antenna is

embedded within the enclosure; the best reception will be directly

through the front panel).

Step 4 Secure the unit in the position.

Figure 3.1: Adjusting TEW-412APBO/TEW-413APBO for best reception

Mounting the AP/Bridge

3English

Step 1 Connect the Ethernet cable from the TEW-412APBO/TEW-413APBO

AP/Bridge to the port on the POE (Power over Ethernet) host (PH-

110 Power LAN 1 port hub) labeled P-LAN OUT.

Step 2 Connect a straight-through Ethernet cable from the LAN-IN port of

the POE host to a spare port on the hub or a switch within the local

network.

The steps described above are summarized in the Figure 3.2.

Connect to the power source and the local network

In the next section, we will discuss the procedure to setup a computer on the

local network, so we can use it to configure the AP/Bridge.

Figure 3.2: Connecting TEW-412APBO/TEW-413APBO

to the power source and to the network

4English

3. Configuring a setup computer on the LAN

To configure the TEW-412APBO/TEW-413APBO for the first time, you should

prepare one computer for the TEW-412APBO/TEW-413APBO setup. The

operating system of this computer can be Windows, Linux, or MAC with the

standard browsers (e.g., Netscape or Microsoft Internet Explorer versions 4.0

or later).

The usual factory settings for the TEW-412APBO/TEW-413APBO are:

IP address: 192.168.1.250

Netmask: 255.255.255.0

This computer must be connected to the same LAN as the TEW-

412APBO/TEW-413APBO, and the network of this computer should contain

the following parameters:

IP address: A free IP address in the 192.168.1.1 - 192.168.1.253

EXCEPT 192.168.1.250

Netmask: 255.255.255.0

Default Gateway: None

For example, under Microsoft Windows XP, the TCP/IP network settings page

would look like the following:

After setting these values on the LAN connected computer, the initial setup

process, as described in the next section can be started.

Sample MS Windows XP network settings

5English

4. Configuring the AP/Bridge

After the TEW-412APBO/TEW-413APBO AP/Bridge is connected to your

network, you can begin to manage the router through a standard web browser.

To use a browser to setup TEW-412APBO/TEW-413APBO, follow these steps:

1. Launch a web browser on a computer connected to the network.

2. Enter the AP/Bridge's IP address in the browser address line and press

Enter. The default IP address of TEW-412APBO/TEW-413APBO AP/Bridge

is 192.168.1.250, so type http://192.168.1.250 as the URL in your web

browser. It may look like the following:

3. Type in “admin” for the user name and type in “admin” for the password.

Click OK.

6English

4. Scroll down to the LAN section and type in the IP Address, the Subnet

Mask, and the Gateway that applies to your current networking settings.

5. Scroll down to the Wireless section and change the SSID to a name that will

help you identify the TEW-412APBO/TEW-413APBO. In this example, the

SSID will be changed to TEW-412APBO.

7English

6. Click Continue.

Your AP should now be up and running. Consult the User's Guide on the CD

for a description of the AP/Bridge system management functions and the

instructions to access the Help Guide.

8English

5. Quick test (Post test)

(using TRENDnet's TEW-424UB as an example in this section)

The settings of the Access Point are:

SSID - TEW-412APBO

Channel - 6

1. Double-click the wireless computer icon in your system tray (next to the

clock in the bottom right corner of your screen).

2. Click the SSID that you assigned to the TEW-412APBO/TEW-413APBO and

click Connect.

From a Wireless Computer

Andere Handbücher für TEW-413APBO

Dieses Handbuch passt für folgende Modelle

Andere TRENDnet Drahtloser Zugangspunkt Handbücher

TRENDnet

TRENDnet TPL-210AP Bedienungsanleitung

TRENDnet

TRENDnet TEW-753DAP Bedienungsanleitung

TRENDnet

TRENDnet TEW-638PAP Bedienungsanleitung

TRENDnet

TRENDnet TEW-413APBO Bedienungsanleitung

TRENDnet

TRENDnet TEW-921DAP Bedienungsanleitung

TRENDnet

TRENDnet WAP-200A Bedienungsanleitung

TRENDnet

TRENDnet TEW-430APB - Wireless Access Point Bedienungsanleitung

TRENDnet

TRENDnet TEW-638PAP Bedienungsanleitung

TRENDnet

TRENDnet TEW-809UB(V1) Bedienungsanleitung

TRENDnet

TRENDnet TEW-450APB - Wireless Super G Access Point Bedienungsanleitung

TRENDnet

TRENDnet TEW-670APB Bedienungsanleitung

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Bedienungsanleitung

TRENDnet

TRENDnet TEW-750DAP Bedienungsanleitung

TRENDnet

TRENDnet TPL-210AP Bedienungsanleitung

TRENDnet

TRENDnet TEW-650AP Bedienungsanleitung

TRENDnet

TRENDnet TEW-610APB Bedienungsanleitung

TRENDnet

TRENDnet TEW-740APBO Bedienungsanleitung

TRENDnet

TRENDnet TEW-638APB Bedienungsanleitung

TRENDnet

TRENDnet TEW-740APBO2K Bedienungsanleitung

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Bedienungsanleitung

TRENDnet

TRENDnet TEW-815DAP Bedienungsanleitung

TRENDnet

TRENDnet TEW -739APBO Bedienungsanleitung

TRENDnet

TRENDnet TEW-510APB Bedienungsanleitung

TRENDnet

TRENDnet TEW-820AP Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung