TRENDnet TEW-651BR Bedienungsanleitung
Quick Installation Guide
TEW-651BR
1.04
Table of Contents
Version 08.02.2010
English 1
Troubleshooting 6
Wireless Tips 7
1. Before You Start 1
2. Hardware Installation 2
3. Configure the Wireless Router 3
ENGLISHFRANÇAISDEUTSCHESPAÑOL
РУССКИЙ
1. Before You Start
Package Contents
System Requirements
1
?
?
?
?
?
TEW-651BR
User's Guide CD-ROM
Multi-Language Quick Installation Guide
Cat. 5 Ethernet Cable (1.5m/4.9ft)
AC PowerAdapter (5V DC, 1.2A)
?
?
?
?
Acomputer with a wired or wireless network adapter properly installed
Web Browser: Internet Explorer (5.0 or higher)
Broadband Internet
Installed Cable or DSLModem
ENGLISHFRANÇAISDEUTSCHESPAÑOL
РУССКИЙ
2. Hardware Installation
2
Note: Gather all information related to your Internet Connection before you start. If
necessary, contact your Internet Service Provider (ISP).
Cable/DSL Modem
Internet
1. Verify that you have an Internet connection
when connecting your computer directly to the
Cable or DSLmodem. Open your browser (e.g.
Internet Explorer) and type in a URL(e.g.
http://www.trendnet.com) in the address bar.
4. Connect theAC PowerAdapter to the wireless
router and then to a power outlet.
5. Verify that the following panel lights are on:
Power, LAN, WAN and WLAN.
2. Connect one end of a RJ-45 cable to one of the
TEW-651BR's LAN ports. Connect the other
end of the cable to the computer's Ethernet
port.
3. Connect one end of a RJ-45 cable to the
TEW-651BR’s WAN port. Connect the other
end of the cable to your modem.
ENGLISHFRANÇAISDEUTSCHESPAÑOL
РУССКИЙ
3
3. Configure the Wireless Router
Note: It is recommended that you configure the Wireless Router from a wired computer.
1. Open your web browser, type
http://192.168.10.1 in the Address bar, and
then press Enter.
2. Enter the User Name and Password, and then
click Log In.
User Name: admin
Password: admin
3. The Wizard will automatically appear. Click
Wizard if the Wizard does not automatically
appear.
ENGLISHFRANÇAISDEUTSCHESPAÑOL
РУССКИЙ
4
4. Click Next.
5. Enter a Password, verify the Password and
then click Next. By default, the Password is
admin.
6. Select your Time Zone and then click Next.
7. Click Next. Note: Do not change default
settings unless it is conflicting with your existing
hardware.
8. Configure the settings based on information
provided by your ISP. Follow the wizard
instructions to complete the configuration.
Note: Each Internet Connection type may have
different options.
9. Click Next.
ENGLISHFRANÇAISDEUTSCHESPAÑOL
РУССКИЙ
5
Note: It is recommended that you enable encryption on the wireless router. Please refer
to the User Guide on the User's Guide CD-ROM for information on setting up encryption
on the wireless router.
Your configuration is now complete
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
For detailed information regarding the TEW-651BR configuration and advanced settings,
please refer to User's Guide included on the Utility CD-ROM, or TRENDnet's website at
http://www.trendnet.com.
10. Click Restart.
11. Wait 30 seconds while the router reboots.
12. Open up your browser and enter in a URL
(e.g. www.trendnet.com) to verify that you
have Internet connection.
6
1. I typed http://192.168.10.1 in my Internet Browser'sAddress Bar, but an error message
says “The page cannot be displayed.” How can I get into the TEW-651BR's web
configuration page?
1. Check your hardware settings again by following the instructions in Section 2.
2. Make sure the LAN and WLAN lights are lit.
3. Make sure your TCP/IPsettings are set to Obtain an IP address automatically (see the
steps below).
4. Press on the factory reset button for 15 seconds.
Trouble Shooting
Windows 7
Windows Vista
1. Go into the Control Panel, click Network and
Sharing Center, click ChangeAdapter
Settings and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4) and
then click Properties. Then click on Obtain an IP
address automatically.
1. Go into the Control Panel, click Network
and Internet, click Network and Sharing
Center, click Manage Network Connections
and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4) and
then click Properties. Then click on Obtain an IP
address automatically.
7
2. I am not sure what type of InternetAccount Type I have for my Cable/DSL connection.
How do I find out?
Contact your Internet Service Provider's (ISP) support service for the correct information.
3. The Wizard does not appear. What should I do?
1. Click on Wizard on the left hand side.
2. Near the top of the browser, “Pop-up blocked” message may appear. Right click on the
message and selectAlwaysAllow Pop-ups from This Site.
3. Disable your browser's pop up blocker.
4. I went through the Wizard, but I can not get onto the Internet. What should I do?
1. Verify that you can get onto the Internet with a direct connection into your modem.
2. Contact your ISP and verify all the information that you have in regards to your Internet
connection settings is correct.
3. Power cycle your modem and router. Unplug the power to the modem and router. Wait
30 seconds, and then reconnect the power to the modem. Wait for the modem to fully
boot up, and then reconnect the power to the router.
5. I cannot make a wireless connection to the Router. What should I do?
1. Double check that the WLAN light on the Router is lit.
2. Power cycle the TEW-651BR. Unplug the power to the TEW-651BR. Wait 15 seconds,
then plug the power back in to the TEW-651BR.
3. Contact the manufacturer of your wireless network adapter and make sure the wireless
network adapter is configured with the proper SSID. The preset SSID isTRENDnet651.
If you still encounter problems or have any questions regarding the TEW-651BR,please contact
TRENDnet's Technical Support Department.
Windows XP/2000
1. Go into the Control Panel, double-click the
Network Connections icon and then right-
click the Local Area Connection icon and
then click Properties.
2. Click Internet Protocol (TCP/IP) and then
click Properties. Then click on Obtain an IP
address automatically.
The following are some general wireless tips to help minimize the impact of interference within an
environment.
Assign your network a unique SSID
Do not use anything that would be identifying like “Smith Family Network”. Choose
something that you would easily identify when searching for available wireless networks.
Do not turn off the SSID broadcast
The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
The preferred method of securing a wireless network is to choose a strong form of encryption
with a strong and varied encryption key.
Change the channel
Most wireless access points and routers are defaulted to channel 6. If you have a site survey
tool that will display the channels you can plan your channel selection around neighboring
access points to minimize interference from them. If your site survey tool does not display
the channel try using channels 1 or 11.
Change the channel bandwidth
If you are using an 802.11n router or access point you can also make the following changes.
Change the channel bandwidth to 20/40MHz. This will provide the highest possible
performance using an 802.11n device. Also, if using 802.11n you should be securing the
network with WPA2 security.
Avoid stacking hardware on top of each other to prevent overheating issues
Maintain enough free space around the hardware for good ventilation and airflow. There
should also be plenty of free space around the antennas to allow the wireless signal to
propagate. Please also make sure that the wireless hardware is not placed in any type of
shelving or enclosures.
There are a number of other environmental factors that can impact the range of wireless
devices.
1.Adjust your wireless devices so that the signal is traveling in a straight path, rather than at
an angle. The more material the signal has to pass through the more signal you will lose.
Note: after setting up the SSID, encryption type and encryption key/passphrase, please
make a note of them for future reference. You will need this information to connect your
wireless computers to the wireless router/access point.
Note: Due to Wi-Fi certification considerations if you choose WEP, WPAor WPA2-TKIP
encryption this device may operate in legacy wireless mode (802.11b/g). You may not get
802.11n performance as these forms of encryption are not supported by the 802.11n
specification.
8
Wireless Tips
Andere Handbücher für TEW-651BR
5
Inhaltsverzeichnis
Andere TRENDnet WLAN-Router Handbücher
TRENDnet
TRENDnet TEW-634GRU Bedienungsanleitung
TRENDnet
TRENDnet TEW-432BRP - Wireless Router Bedienungsanleitung
TRENDnet
TRENDnet TEW-714TRU Bedienungsanleitung
TRENDnet
TRENDnet TEW-432BRP - Wireless Router Bedienungsanleitung
TRENDnet
TRENDnet N600 Bedienungsanleitung
TRENDnet
TRENDnet AC1750 Bedienungsanleitung
TRENDnet
TRENDnet TEW-715APO Bedienungsanleitung
TRENDnet
TRENDnet TEW-633GR - Wireless Router Bedienungsanleitung
TRENDnet
TRENDnet TEW-652BRU Bedienungsanleitung
TRENDnet
TRENDnet TEW-690AP Bedienungsanleitung
TRENDnet
TRENDnet TEW-817DTR Bedienungsanleitung
TRENDnet
TRENDnet TEW-431BRP Bedienungsanleitung
TRENDnet
TRENDnet TEW-812DRU Bedienungsanleitung
TRENDnet
TRENDnet TEW-611BRP Bedienungsanleitung
TRENDnet
TRENDnet TEW-817DTR Bedienungsanleitung
TRENDnet
TRENDnet TEW-452BRP - 108Mbps Wireless Super G Broadband... Bedienungsanleitung
TRENDnet
TRENDnet TEW-654TR - 300Mbps Wireless N Travel Router Bedienungsanleitung
TRENDnet
TRENDnet TEW-211BRP Bedienungsanleitung
TRENDnet
TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Bedienungsanleitung
TRENDnet
TRENDnet TEW-610APB Bedienungsanleitung
