TriBrer EVA50-40 Bedienungsanleitung
WARNINGWARNING
You are cautioned that changes or modifications not espressly approved in
this document could void yout authority to operate this equipment.
Toreduce the risk of fire or electric shock,do not expose this apparatus to
rain or moisture.
Toavoid electrical shock, do not open the cabinet. Refer servicing to quali-
fied personnel only.
Avoiding condensation problems
As much as possible, avoid sudden temperature changes. Do not attempt
to use the drive immediately after moving it from a cold to a warm location,
to raising the room temperature suddenly, as condensation may form with
in the drive. If the temperature changes suddenly while using the drive,
stop using it and take out batteries for at least an hour.
Storage
When long time no use,must take out the batteries to avoid destroying the
device.
Use batteries
At the same time, can not use different style or different capacitance batteries.
And only charge the rechargeable batteries.
1-Protection rubber
2-LCD, display the status and the attenuation value
3-Wavelength shift key
4-Power key
5-Save key
6-Recall key
7-Back light key
8-Attenuation value increase key
9-Attenuation Step key
10-Referrence set key
11-Attenuation value reduce key
12-Connector (standard:FC/PC)
1.Press and push down 2.Open the lid
3.Place the batteries 4.Close the lid and push up
Set batteries
Warning:At the same time, can not use different style and different capacitance batteries.
Keep p
Press the key to turn on the device with auto
power off. About 10 minutes no key pressed, it will auto
power off.
ressing key for 2 seconds when turn on the
device, the auto power off will be cancelled, and the LCD
will show PERM .
Also press it to shut the device.
Power on/off, auto power off
1310nm,1490nm,1550nm.
Press the key to shift the wavelength.
And the corresponding wavelength will be on the LCD.
It have three wavelengths:
Wave select
Adjust the attenuation value
Press the key to increase the attenuation
value and press the key to reduce the attenuation
value. The Max. attenuation value is 60.0dB and the
Min. attenuation value is 00.0dB.
Reference
REF
REF
Press the key to set the reference of attenuation
value
,
and it will be displayed on the LCD. It will be cancelled
when you press the
key again
.
Saving the attenuation value
Save
Press the key to save the attenuation value
and it will enter the save menu. It can save eight value .
Press the key to select the different record
and press the key to save.If you do not want to
save the value you can press the Recall key.
Save
Save
Save
Recall
Pressing the Recall key can shift the eight records
that you have saved.
Inhaltsverzeichnis
Andere TriBrer Messgerät Handbücher
TriBrer
TriBrer EPM30 Bedienungsanleitung
TriBrer
TriBrer EPN70 Bedienungsanleitung
TriBrer
TriBrer APL-2 Bedienungsanleitung
TriBrer
TriBrer EPN90 Bedienungsanleitung
TriBrer
TriBrer FOT-100 Bedienungsanleitung
TriBrer
TriBrer OTDR AOR-50 Bedienungsanleitung
TriBrer
TriBrer AOU400 Bedienungsanleitung
TriBrer
TriBrer AOP100 Bedienungsanleitung
TriBrer
TriBrer AOP110 Bedienungsanleitung
TriBrer
TriBrer TB-6 Series Bedienungsanleitung
