TriMark E-ASK UM26 Bedienungsanleitung

e-ASK

electronic Access Security Keyless-entry

CAN Multiplex System

Installation & Instructions

(UM26 ~ 24324-02)

Table of Contents

Introduction ................................................................................... 1

e-FOB Operation and Features - Standard Mode ...................... 2

e-FOB Operation and Features - Cargo Mode ........................... 3

Standard e-PAD Operation and Features ................................... 4

Locking Doors With Keypad ....................................................... 4

Secure Operations ..................................................................... 4

Doorbell e-PAD Operation and Features .................................... 5

Locking Doors With Keypad ....................................................... 5

Doorbell Operation ..................................................................... 5

Secure Operations ..................................................................... 5

e-ASK CAN DIP Switch Configuration ................................... 6

DIP Switches 1-3 ........................................................................ 6

DIP Switches 4-6 ........................................................................ 6

Keypad DIP Switch Setting Configurations ................................ 6

Configuration A [SW 4 off / SW 5 off / SW 6 off] ........................................... 6

Configuration B [SW 4 off / SW 5 off / SW 6 on] ........................................... 6

Configuration C [SW 4 off / SW 5 on / SW 6 off]: ......................................... 7

Configuration D [SW 4 off / SW 5 on / SW 6 on]: ......................................... 7

Interior Switch DIP Switch Setting Configurations ..................... 7

Configuration A [SW 4 off / SW 5 off / SW 6 off]: .......................................... 7

Configuration B [SW 4 off / SW 5 off / SW 6 on]: .......................................... 7

Configuration C [SW 4 off / SW 5 on / SW 6 off]: ......................................... 7

Configuration D [SW 4 off / SW 5 on / SW 6 on]: .......................................... 8

DIP Switch 7 ............................................................................... 8

DIP Switch 8 ............................................................................... 8

Additional Keyless Entry System Features ............................... 9

Dome/Porch Light Activation ...................................................... 9

e-PAD Anti-tamper Deactivation Feature .................................. 9

e-GRAB Handle Lighting ........................................................... 9

Trim Pot Variable Resistor ......................................................... 9

Status LED ................................................................................. 9

Internally Controlled Door Locking and Unlocking ..................... 9

Lock and Unlock Confirmation ................................................... 10

Deactivate Lock Confirmation ................................................... 10

Door Ajar Warning ..................................................................... 10

Alarm ......................................................................................... 10

Timed Dome/Porch Light Activation .......................................... 11

Compartment Light Activation ................................................... 11

Auxiliary 1 Output Activation ..................................................... 11

Teaching Additional Transmitter FOBs ..................................... 11

Teaching Keypad New Authority/Access Codes ...................... 13

Assign New Access Codes ....................................................... 14

Troubleshooting .......................................................................... 16

About the “Yellow Programming Wire” ...................................... 16

CAN Error Diagnostic Codes .................................................... 17

CAN Communication Protocol Settings .................................... 18

CAN Communication Configuration .......................................... 19

e-ASK Doorbell Mode Configuraiton ......................................... 20

Setting the Keypad CAN Function Instance (Location) ............. 21

More eASK Hints ....................................................................... 22

Warrenty Information ................................................................. 23

Appendix A: Installation and Application Notes ..................... I

General Mounting Guidelines .................................................... I

Testing Inputs and Outputs ....................................................... I

Clean +12V Power and Ground ................................................ II

Appendix B: Drawing and Wiring Tables ................................. III

Connector Locations ................................................................. III

Table: Equivalent Connectors and Terminals ........................... III

Table: Pin Functions and Locations .......................................... IV

TriMark CAN RF Controller

Introduction

This manual provides the necessary information for the proper

installation and use of TriMark’s CAN e-ASK system including vehicle

module and keypad.

The nature of CAN multiplex communications mandates that at least 2

CAN-enabled devices must be connected via a CAN network in order

for any of the devices to function. Therefore, if this keyless entry

system is being installed into a vehicle that does not have a pre-existing

CAN network to connect into, the RF receiver MUST be installed with a

TriMark CAN-enabled keypad or e-GRAB handle.

The RF controller and FOB transmitters are shipped programmed.

After following installation instructions as shown in this manual, the

system will function as described.

CAN-enabled

e-GRAB Handle

CAN-enabled Keypad —

available vertical or horizontal

e-FOB Operation and Features - Standard Mode

Button Function

Lock Locks doors and arms security system.

Unlock Unlocks doors and disarms security system. Also

activates the dome light.

Panic Activates panic mode when pressed and held for 2

seconds.

* Auxiliary

Button

Auxiliary output. Possible assignment includes: interior/

exterior lighting, awning extension/retraction, gas cap

release, hood release, etc.

Panic button

Unlock button

* Auxiliary button

Lock button

Note:

 Only the unlocking function of the e-FOB remains while the

system detects that the engine is running—other functions are

deactivated.

e-FOB Operation and Features - Cargo Mode

Button Function

Entry Lock Locks entry door and arms security system.

Entry Unlock Unlocks entry door and disarms security system.

Also activates the dome light.

Cargo Lock Locks cargo doors and arms security system.

Cargo Unlock Unlocks cargo doors and disarms security system.

Also activates compartment lights.

Note:

 Only the unlocking function of the e-FOB remains while the

system detects that the engine is running—other functions are

deactivated.

Cargo Lock

Entry Unlock

Cargo Unlock

Entry Lock

Standard e-PAD Operation and Features

The e-PAD is shipped with default Authority and Access Codes. If the

OEM or dealer has not changed the default codes, the Authority and

Access Codes are:

Access code:

Authority code:

Locking Doors With Keypad

Press and hold down the (1 / 2) button for 1-2 seconds.

An Access Code is not needed to lock the doors.

Secure Operations

Entering a valid 5-digit Access Code provides a double-beep and

enables a secure operation. After entering an Access Code, the

keypad is enabled for 5 seconds and the next button pressed initiates

a secure operation, such as unlocking the doors.

Notes:

 The Authority Code does not allow for secure operations. It is

only used to assign access codes (see page 12 for information

on setting access codes).

 If an unassigned button is pressed, or no button is pressed,

within 5 seconds of a correctly entered Access Code, the

keypad reverts back to disabled state.

 If the keypad does not Double-beep after the 5th digit of your

entered Access Code, then you have not entered the correct

Access Code.

 The secure keypad operations are set depending on the system

configuration. See page 6 for more information.

Digit 1 Digit 2 Digit 3 Digit 4 Digit 5

1 / 2 3 / 4 5 / 6 7 / 8 9 / 0

Digit 1 Digit 2 Digit 3 Digit 4 Digit 5

7 / 8 7 / 8 7 / 8 7 / 8 7 / 8

Doorbell e-PAD Operation and Features

Access code:

Authority code:

Locking Doors With Keypad

Press and hold down the (1) button for 1-2 seconds. An

Access Code is not needed to lock the doors.

Door Bell Operation

The doorbell button sends a CAN message to the RF Controller

instantly when pressed. An Access Code is not necessary for the

doorbell.

Secure Operations

Entering a valid 5-digit Access Code provides a double-beep and

enables a secure operation. After entering an Access Code, the keypad

is enabled for 5 seconds and the next button pressed initiates a secure

operation, such as unlocking the doors.

Note:

 The Authority Code does not allow for secure operations. It is

only used to assign access codes (see page 12 for information on

setting access codes).

 If an unassigned button is pressed, or no button is pressed, within

5 seconds of a correctly entered Access Code, the keypad

reverts back to disabled state.

 If the keypad does not Double-beep after the 5th digit of your

entered Access Code, then you have not entered the correct

Access Code.

 The secure keypad operations are set depending on the system

configuration. See the next page for more information.

Digit 1 Digit 2 Digit 3 Digit 4 Digit 5

1 2 3 4 4

Digit 1 Digit 2 Digit 3 Digit 4 Digit 5

4 4 4 4 4

e-ASK CAN DIP Switch Configuration

DIP Switches 1-3:

The settings of DIP switches 1-3 define CAN address of the IO receiver

module. A unique address must be assigned when multiple modules

are used on a CAN

network. If only one

module is used on

network then all DIP

switches should be set

to ON position.

 DIP Switch 1: On

 DIP Switch 2: On

 DIP Switch 3: On

DIP Switches 4-6:

The setting of DIP switches 4-6 define configuration of the IO receiver

module. Each configuration provides different functionality for keypad

and interior switches. Most customers use default configuration D

setting. See configuration setting definitions.

Keypad DIP Switch Setting Configurations:

Entering a 5-digit access code enables the keypad. After entering the

Access Code, the next button pressed initiates a secure operation, such

as unlocking specific doors or another operation according to the

following lists:

Configuration A [SW 4 off / SW 5 off / SW 6 off]:

 Button (1 / 2) (1): Unassigned

 Button (3 / 4) (2): Unlocks all entry and compartment doors

 Button (5 / 6) (3): Unassigned

 Button (7 / 8) (4): Unassigned

 Button (9 / 0): Toggles Aux 1 output

Configuration B [SW 4 off / SW 5 off / SW 6 on]:

 Button (1 / 2) (1): Unlocks all entry door(s)

 Button (3 / 4) (2): Unlocks all entry and compartment doors

 Button (5 / 6) (3): Unassigned

 Button (7 / 8) (4): Unassigned

 Button (9 / 0): Toggles Aux 1 output

Configuration C [SW 4 off / SW 5 on / SW 6 off]:

 Button (1 / 2) (1): Unlocks all entry door(s)

 Button (3 / 4) (2): Unlocks all doors assigned to relay bank A

 Button (5 / 6) (3): Unlocks all doors assigned to relay bank B

 Button (7 / 8) (4): Unlocks all doors assigned to relay bank C

 Button (9 / 0): Unlocks all doors assigned to relay bank D

Configuration D [SW 4 off / SW 5 on / SW 6 on]:

 Button (1 / 2) (1): Unlocks all entry doors

 Button (3 / 4) (2): Unlocks all entry and compartment doors

 Button (5 / 6) (3): Unlocks all curb side compartment doors

(relay banks C-D)

 Button (7 / 8) (4): Unlocks all driver side compartment doors

(relay banks A-B)

 Button (9 / 0): Toggles Aux 1 output

Interior Switch Dip Switch Setting Configurations:

The following vehicle switch assignments of connector J1 define

functional assignment of interior switches. When the switch input is

grounded, its corresponding function is specified.

Configuration A [SW 4 off / SW 5 off / SW 6 off]:

 J1 pin 1: Unassigned

 J1 pin 2: Unassigned

 J1 pin 9: Unassigned

 J1 pin 10: Unlocks all doors

 J1 pin 11: Lock all doors

 J1 pin 12: Unassigned

Configuration B [SW 4 off / SW 5 off / SW 6 on]:

 J1 pin 1: Lock all compartment doors (banks A-D)

 J1 pin 2: Unlock all compartment doors (banks A-D)

 J1 pin 9: Unlock entry door(s)

 J1 pin 10: Unlock all doors

 J1 pin 11: Lock all doors

 J1 pin 12: Lock entry door(s)

Configuration C [SW 4 off / SW 5 on / SW 6 off]:

 J1 pin 1: Unlock bank A

 J1 pin 2: Unlock bank B

 J1 pin 9: Unlock bank D

 J1 pin 10: Unlock entry door(s)

 J1 pin 11: Lock all doors

 J1 pin 12: Unlock bank C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TriMark Türöffnungssystem Handbücher

TriMark

TriMark UM 34 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Label

Label NEPTIS/LE Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Series Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Olide

Olide 120B Bedienungsanleitung

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

TriMark e-ASK UM26 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken