Triplett GSM350 Bedienungsanleitung

User Manual

GSM350

CO/CO2 Meter with Temperature and

Humidity

Introduction

Congratulations on your purchase of the Triplett GSM350 Carbon

Monoxide/Carbon Dioxide IAQ Meter The GSM350 simultaneously

displays CO, CO2, Temperature and Humidity. The meter has a real-time

clock, datalogs and has user settable alarms for CO/CO2.

Meter Description

1. CO/CO2 Sensor

2. Temperature and

Humidity Sensor

3. LCD Display

4. Left Function

Button

5. Right Function

Button

6. ON/OFF Button

7. Enter/Record

Button

8. Return Button

9. Air Bleed Outlet

10. Tripod Mount

11. USB (Charging

and Data) Port

Operation

Measurement Mode

• Long press the ON/OFF Button to boot and shutdown.

• After the device is turned on, the interface can display the value

of Time, Battery Power, CO, CO2, Temperature and Humidity in

real time, CO will begin a sensor warm up period of 30 seconds

and then will start to measure.

• Click the Left Button to enter the setup page, you can set the

Language, Temperature unit switch, data sampling settings,

automatic shutdown settings, alarm settings, brightness

adjustment, time settings.

• Short press of the Right Button will enter the CO, CO2

temperature and humidity and MAX/MIN/AVG mode.

• Press the Enter/Rec Button to enter the history data query

interface.

MAX/MIN/AVG Mode

In this mode, the real-time data, maximum,

minimum and average values for CO, CO2,

Temperature and Humidity is displayed

• Short press Right Button pauses the

reading.

• Short press Left Button switches the

display page, so that CO, CO2, Temperature

and Humidity can be switched in order

• Press the Return Button to return to the main page.

Setup Menu

User Interface allows for the custom setting of Language,

Temperature Unit, Data Log sampling rates, Auto Power Off time,

Alarm settings, Brightness adjustment, and time settings.

• Short press Left/Right Button can move

cursor, Left Button corresponds to “ ,

cursor moves up; Right Button corresponds

to cursor moves down.

• After selecting the corresponding settings,

press the Enter Button to enter the

corresponding setting interface.

Language Setup

Use the cursor to move to the desire language setting.

• Short press the Enter Button to enter

the language setting.

• Choose from English or Chinese.

• Short press Enter Button again to

confirm and return to the setting interface, so that the Chinese

and English interface can be switched.

Temperature Units (°C/°F) Setup

• Use the cursor to move to the desired

Unit, (°C or °F) press the Enter Button

to enter the temperature unit setting.

• You can select the °C or °F.

• Short press the Enter button to

confirm and return to the settings interface

Datalogger Setup

• Use the cursor to move to the

Datalogger settings, Press the Enter

Button to enter the data sampling

setting interface, The sampling rate,

duration, and sleep mode can be set here.

• The sampling rate is the sampling interval time, after the

duration setting is completed, the meter will automatically shut

down (when the timing reaches the sampling time)

Sampling Rate Setup

• Use the cursor to move to the sampling

rate setting. Short press Enter Button to

enter the sampling rate time setting

page.

• The time can be set 1min, 15min,1h.

• After the sampling rate is selected, - Short press the Enter

Button to confirm and return to the datalogger page.

Sleep Mode Setup

• Use the cursor to move to the

sleep mode setting, then short

press Enter Button to enter the

sleep mode setting interface.

• Set the sleep mode to ON or OFF

• Short press the Enter Button to confirm and return to the

datalogger page.

Auto Power OFF (APO) Setup

• Use the cursor to Auto-off, short

press Enter Button to enter

automatic shutdown setting

• User can select None, 2min,

10min, 1h.

• Press the Enter Button to confirm

and return to the settings interface.

• After setting up, the meter will Auto Power Off at the selected

time.

• Choosing None will run until low battery and shut down.

Alarm Setup

• Use the cursor to move to the Alarm

setting, short press Enter Button to enter

the alarm setting.

• The CO2 alarm value setting is first, a

short press of the Left Button increases

alarm limit, and a short press of the Right

Button decreases the alarm limit

• After setting the short press button to

confirm the setting and enter the CO alarm

value setting and repeat steps.

• When the measured value is higher than

the alarm value, the display value color changes from black to red,

and when the CO or CO2 exceeds the alarm value, the buzzer

sounds to alarm.

Brightness Setup

• Use the cursor to adjust the display

brightness, short press Enter Button to enter

brightness adjustment. There are (4) levels

to select from.

• Short press Left Button to decrease the

brightness; Short press Right Button to

increase the brightness.

Date/Time Setup

• Use the cursor to move to the

Date/Time setting , short press the Enter

Button to enter the time initialization

setting.

• First set for the year, short press Left

Button plus, short press Right Button

minus.

• After setting up short press Enter

Button confirmation into the month

settings, and so on set the year.

• Can choose 24H system or 12H system, short press Left, or Right

Button can achieve switching.

• Then enter the time division setting, short press Left Button

plus, short press Right Button minus.

• Confirm and exit by Enter Button after setting up.

History (Page 1)

• Under the main interface, long press

the Enter Button to enter the

sampling history data query page.

•Move the cursor through the

Left/Right Button, select the

corresponding date and time data.

• Short press the Enter Button to enter the CO2, CO, Temperature

and Humidity selection interface.

History (Page 2)

• After entering the selection

interface, there are CO2, CO,

Temperature and Humidity options.

• Select one of them and press the

Enter Button to enter the histogram

display interface.

Histogram Query (Page 3)

You can query the real-time data

corresponding to the history time and the

MAX/MIN/AVG value. And visualize it in

the form of histogram.

•A short press Left Button can make time

move forward, a short press of the Right

Button can make time move back, the

change of time can be seen in the

operation process.

Exporting Logged Data to .CSV File

• When the instrument is in the OFF state, you can use USB lcable

to connect to the computer and to transfer the logged data.

• The data of each sampling is recorded in the form of CSV (Excel).

• You can also delete files from this mode.

Maintenance

• Maintenance or services are not included in this manual and

products must be repaired by professionals.

• Specifications are subject to change.

Specifications

Function

Range

Resolution

Accuracy

0 to 1000PPM

1PPM

±5% FS

CO2

0 to 9999PPM

1PPM

±3% ±75PPM

Temper

ature

0 to 50°C/32 to

122°F

0.1°C/0.1°

±2°C/±4°F

Humidi

0 to 100%RH

0.1%RH

±3.5% at (20% to 80%)

±5% at (0 to 20%)

±5% at (80% to 100%)

**Note: The humidity test is tested under about 1m/s wind

speed, the response timeof the sensor to the accuracy of the

index is about 30 minutes.

** Note: Recommended CO measuring environment 0 to 40°C (32

to 104°F), 15 to 95%; CO2 measuring environment 0 to 50°C (32 to

122°F),0 to 85%.

General Specifications

Andere Handbücher für GSM350

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Triplett Messgerät Handbücher

Triplett

Triplett 630 Bedienungsanleitung

Triplett

Triplett TMP230 Bedienungsanleitung

Triplett

Triplett PQC300 Bedienungsanleitung

Triplett

Triplett CFM100 Bedienungsanleitung

Triplett

Triplett 360PL Bedienungsanleitung

Triplett

Triplett LT65 Bedienungsanleitung

Triplett

Triplett PR400 Bedienungsanleitung

Triplett

Triplett UTG300 Bedienungsanleitung

Triplett

Triplett CM1050 Bedienungsanleitung

Triplett

Triplett 9200B Bedienungsanleitung

Triplett

Triplett SONICHEK PRO 3550 Bedienungsanleitung

Triplett

Triplett SL600-KIT Bedienungsanleitung

Triplett

Triplett EM400 Bedienungsanleitung

Triplett

Triplett RHT45 Bedienungsanleitung

Triplett

Triplett AM200 Bedienungsanleitung

Triplett

Triplett ET400 Bedienungsanleitung

Triplett

Triplett MS245 Bedienungsanleitung

Triplett

Triplett WireMAster Coax BNC Bedienungsanleitung

Triplett

Triplett DPR302 Bedienungsanleitung

Triplett

Triplett TA150 Bedienungsanleitung

Triplett

Triplett Cam View Elite Bedienungsanleitung

Triplett

Triplett CM1000 Bedienungsanleitung

Triplett

Triplett RHT37 Bedienungsanleitung

Triplett

Triplett SL600-KIT Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung