Tripp Lite SRIN410106 Bedienungsanleitung

Installation Guide

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Español 7 • Français 13 • Русский 19

NEMA-4 Single-Lock

Metal Enclosure

Models:

SRIN410106, SRIN4101010, SRIN410146, SRIN4101410,

SRIN412126, SRIN4121210, SRIN414146, SRIN4141410

Series Numbers: (AC0043, AC004C, AC004B, AC004A, AC0049, AC0048, AC0047, AC0046)

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Components List

Installation

IMPORTANT:

Ensure you have received all parts according to the component checklist prior to installing. If any parts are

missing or faulty, visit tripplite.com/support for service.

x4 x8 x1 x2

x1 (Metal)

x1 (Plastic)

1. Attach Mounting Feet to the Enclosure’s Rear Panel

Note: SRIN4141410 model shown. Enclosure

size and dimensions will differ by model.

Installation

• Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws

(not included) to secure the enclosure in place.

• Make sure mounting screws are anchored into the center of the studs. Use of a stud ﬁnder is highly recommended.

• If there is no stud at the mounting location, it is recommended you use four anchors to secure the enclosure in place.

Due to the weight of the enclosure, plastic expansion wall anchors are not recommended for drywall installations.

Suitable anchors include: threaded drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors

(a.k.a. molly bolts) or toggle bolts.

• If placing the enclosure over a telecommunications receptacle, remove the wall plate, then fasten the enclosure to the

wall. Once secured, fasten the wall plate over the receptacle.

• If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be

mounted inside the unit.

• Use an adhesive-backed surface mount box.

2. Mount Enclosure to Wall

Mark the exact

location of the

mounting holes

Attach the

enclosure to

the wall

Drill pilot holes

Find a wood stud

location for mounting

the enclosure

(Mounting Hardware

Not Included)

Installation

3. Use a Drill to Create a Bottom

Conduit Cutout

4. Run Data and Power Cable (If

Required) Through the Conduit

Cutout

Note: To maintain a NEMA rating, use sealed ﬁt-

tings in the cutouts when connecting to conduit.

Installation

5. Secure the Enclosure Cover

LOCK

UNLOCK

Warranty and Product Registration

5-year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and

workmanship for a period of 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within

that period, Seller will repair or replace the product, in its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER

MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION

TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL

DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you

speciﬁc legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use

intended. Since individual applications are subject to great variation , the manufacturer makes no representation or warranty as to the

suitability or ﬁtness of these devices for any speciﬁc application.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a

FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and illustrations may differ

slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

20-12-303 93-3DAD_RevA

Guía de Instalación

1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support

English 1 • Français 13 • Русский 19

Gabinete Metálico

con Cerradura Sencilla NEMA-4

Modelos:

SRIN410106, SRIN4101010, SRIN410146, SRIN4101410,

SRIN412126, SRIN4121210, SRIN414146, SRIN4141410

Números de Serie: (AC0043, AC004C, AC004B, AC004A, AC0049, AC0048, AC0047, AC0046)

Lista de Componentes

Instalación

IMPORTANTE:

Antes de proceder a instalar, asegúrese de haber recibido todas las partes de acuerdo con la lista de

comprobación de componentes. Si faltase alguna parte o estuviese dañada, visite tripplite.com/support para

solicitar servicio.

x4 x8 x1 x2

x1 (Metal)

x1 (Plástico)

1. Fije las Patas de Instalación al Panel Posterior del Gabinete

Nota: Se muestra el modelo SRIN4141410.

El tamaño y dimensiones del gabinete variarán

según el modelo.

Instalación

• Los instaladores son responsables de suministrar los accesorios para instalación en la pared. Use como mínimo dos

tornillos #10 x 2” o más grandes (no incluidos) para ﬁjar el gabinete en su lugar.

• Cerciórese que los tornillos de instalación estén anclados en el centro de los travesaños. Es muy recomendable usar un

detector de travesaños.

• Si no hay algún travesaño en el lugar de instalación, se le recomienda utilizar cuatro taquetes para ﬁjar el gabinete

en su lugar. Debido al peso del gabinete, no se recomiendan taquetes de expansión de plástico para instalaciones en

tablarroca. Los taquetes adecuados incluyen: taquetes roscados para tablarroca, tornillos roscados tipo mariposa para

tablarroca, taquetes expansivos (también conocidos como tornillos molly) o tornillos de anclaje.

• Si coloca el gabinete sobre un receptáculo de telecomunicaciones, retire la placa de pared, luego ﬁje el gabinete a la

pared. Una vez asegurado, ﬁje la placa de pared sobre el receptáculo.

• Si no está disponible un receptáculo de telecomunicaciones, una caja de instalación sobre superﬁcie (o conector sobre

superﬁcie) y un cable de equipo pueden ser instalados dentro de la unidad.

• Use una caja de instalación sobre superﬁcie con respaldo adhesivo.

2. Instalación del Gabinete a la Pared

Marque la posición

exacta de los oriﬁcios

de instalación

Coloque el

gabinete en la

pared

Perfore los oriﬁcios piloto

Localice un punto en el

travesaño de madera para la

instalación del gabinete

(No Incluye

Accesorios de

Instalación)

Instalación

3. Utilice un Taladro para Crear un

Recorte para Conducto Inferior

4. Conduzca el Cable de Datos y

Alimentación (Si se Requiere)

A Través del Recorte para el

Conducto

Nota: Para mantener una especiﬁcación NEMA, uti-

lice accesorios sellados en los recortes al conectar

a conductos.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Tripp Lite Gehäuse Handbücher

Tripp Lite

Tripp Lite U457-025-AG2 Bedienungsanleitung

Tripp Lite

Tripp Lite U357-025-UASP Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SRX47UBEXP Series Bedienungsanleitung

Tripp Lite

Tripp Lite BP-260 Bedienungsanleitung

Tripp Lite

Tripp Lite BP480V40 Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SRWF5U Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SRW6U Bedienungsanleitung

Tripp Lite

Tripp Lite EN1511N4LATCH Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SRW6U Bedienungsanleitung

Tripp Lite

Tripp Lite SR1UBRUSH Installationsanleitung

Tripp Lite

Tripp Lite SmartRack SRWF2U Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SRWF5U Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack AG-0605 Series Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SR25UB Bedienungsanleitung

Tripp Lite

Tripp Lite U357-025-SEC Bedienungsanleitung

Tripp Lite

Tripp Lite U457-025-SATAG2 Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SR42UBSP1 Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SR25UB Bedienungsanleitung

Tripp Lite

Tripp Lite 3-Breaker Parallel Tie Cabinet (for SU20KX 3-Phase UPS)... Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SR25UBEXP Bedienungsanleitung

Tripp Lite

Tripp Lite AGAC7006 Bedienungsanleitung

Tripp Lite

Tripp Lite SmartRack SRW9U Bedienungsanleitung

Tripp Lite

Tripp Lite N484-00U Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung