Tripp Lite PINV300SW-120 Bedienungsanleitung

Owner’s Manual

Tripp Lite

DC-to-AC Sine Wave

Inverters

Series Models: PINV300SW-120, PINV600SW-120,

PINV1000SW-120, PINV1500SW-120

Input: 12V DC Output: 110V 60 Hz AC

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Español 28 • Français 55

Congratulations! You’ve purchased a high-quality inverter designed

to function as a mobile energy source powered by your automotive

battery. Tripp Lite inverters convert 12V DC (battery) power into 110V

AC (household) power, allowing you to use equipment you commonly

use at home—computers, appliances, electronics, power tools and

more—while traveling by automobile or working at remote locations

that lack AC power. Tripp Lite inverters include advanced features that

protect your equipment, lengthen the service life of your battery and

ensure you’ll always have battery power to start your vehicle:

• Pure Sine-Wave Output

• Automatic Overload Protection

• Automatic Low-Battery Protection

• High-Performance DC-to-AC Inversion

• Simple, Maintenance-Free Operation

• AC Outlets (Varies by model)

• USB-A 5V 2.1A Charging Port

• USB-C 5V 3A / 9V 2A / 12V 1.5A (18W Max) Charging Port

• Wired Remote Control (PINV1000SW-120/PINV1500SW-120

models only)

Important Safety Instructions 3

Feature Identiﬁcation 6

Battery Selection 9

Mounting 10

Battery Connection 16

Operation 20

Troubleshooting /Maintenance 23

Service 26

Warranty & Product Registration 27

Reliable AC Power Wherever You Need It

Important Safety Instructions

SAVE THESE INSTRUCTIONS!

This manual contains important instructions and warnings

that should be followed during the installation, operation

and storage of all Tripp Lite Inverters. Failure to heed these

warnings may affect warranty.

CAUTION: A battery can present a risk of electric shock

and burn from high short-circuit current. Observe proper

precautions. There are no user serviceable parts inside

the inverter. Do not open. Do not short or bridge the

battery terminals with any object.

Location Warnings

• Install your Inverter (whether for a mobile or stationary application)

in a location or compartment that minimizes exposure to heat, dust,

direct sunlight and moisture.

• Although your Inverter is moisture resistant, it is NOT waterproof.

Flooding the unit with water will cause it to short circuit and could

cause personal injury due to electric shock. Never immerse the

unit, and avoid any area where standing water might accumulate.

Mounting should be in the driest location available.

• Leave a minimum of 20 inches (51 cm) clearance at front and

back of the Inverter for proper ventilation. The heavier the load

of connected equipment, the more heat will be generated by the

unit. Any compartment that contains the Inverter must be properly

ventilated with adequate outside airﬂow to avoid overheating the

Inverter.

• Ambient temperature should be kept between -5°F and 77°F

(-20°C and 25°C).

• Do not install the Inverter directly near magnetic storage media, as

this may result in data corruption.

Important Safety Instructions

• Do not install near ﬂammable materials, fuel or chemicals.

• Do not mount unit with its front or rear panel facing down (at any

angle). Mounting in this manner will seriously inhibit the unit’s

internal cooling, eventually causing product damage not covered

under warranty.

Battery Connection Warnings

• Multiple battery systems must be comprised of batteries of identical

voltage, age, amp-hour capacity and type.

• Because explosive hydrogen gas can accumulate near batteries

if they are not kept well ventilated, your batteries should not be

installed (whether for a mobile or stationary application) in a “dead

air” compartment. Ideally, any compartment would have some

ventilation to outside air.

• Sparks may result during ﬁnal battery connection. Always observe

proper polarity as batteries are connected.

• Do not allow objects to contact the two DC input terminals. Do not

short or bridge these terminals together. Serious personal injury or

property damage could result.

• Connect the Inverter to the battery with recommended DC fusing

(see Battery Connection) along with properly sized battery cabling

Ground Connection Warnings

• Safe operation requires connecting the Inverter’s main grounding

screw directly to the frame of the vehicle or earth ground.

Important Safety Instructions

Equipment Connection Warnings

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is

not recommended.

Operation Warnings

• Your inverter does not require routine maintenance. Do not open the

device for any reason. There are no user-serviceable parts inside.

• Potentially lethal voltages exist within the inverter as long as the

battery is connected. During any service work, the battery should

therefore be disconnected.

• Do not connect or disconnect batteries while the inverter is

operating. Dangerous arcing may result.

Feature Identiﬁcation

PINV300SW-120 / PINV600SW-120

PINV1000SW-120 / PINV1500SW-120

Feature Identiﬁcation

AAC Outlets: NEMA 5-15R outlets allow you to connect

equipment that normally plugs into an AC utility outlet.

BLED Status Indicators: When the switch is set to the ON

position, the power status LED will illuminate green during normal

operation and along side the fault conditions. The Fault LED will

illuminate red when certain fault conditions occur.

Function

LED

Fault (Red)* Power (Green)

Input under-voltage alarm Off On

Input under-voltage shutdown On On

Input over-voltage shutdown On On

Overload shutdown On On

Output short-circuit On On

* The internal audible alarm activates for all alarm and fault conditions.

CON/OFF Switch: When you set the switch to the ON position,

the Inverter provides AC power by converting DC power from the

connected 12V battery system. Set the switch to the OFF position

to shut down the Inverter and conserve the battery’s charge when

you are not using connected equipment. Also, set the switch to

the OFF position to reset the Inverter if it has shut down due to

overload or other critical events. Select models include a wired

REMOTE port to extend ON/OFF control to a remote location with

the included PINVSWRM remote panel. The remote provides

ON/OFF control and operation status LEDs to let you know the

inverter is ON and working correctly or not. See the Operation

section for more information.

DUSB Charging Ports: 5V DC 2.1A USB-A and 5V 3A / 9V 2A /

12V 1.5A (18W Max) USB-C charging ports support smartphones,

tablets, telematics and other electronic devices.

ERemote Control Port (PINV1000SW-120/PINV1500SW-120

models only): The 6-conductor telephone-style jack on the front

panel can be used with the included remote control module

(Tripp Lite model PINVSWRM). The remote module allows the

Inverter to be mounted out of sight in a compartment or cabinet,

while operated conveniently from your vehicle’s dashboard. See

Mounting and Operation section instructions for use of the

remote control module.

FDC Input Terminals: These positive and negative terminals

connect to the battery via the included or user-supplied cabling.

See Battery Connection for instructions.

GCooling Fan: This fan regulates the internal temperature of

the inverter and prolongs service life. It will only activate if the

temperature or load demand goes beyond the set thresholds.

HMain Ground Lug: Connects to an earth ground or a vehicle

grounding system in order to properly ground the inverter. See

Battery Connection for instructions.

Feature Identiﬁcation

Battery Selection

Match Battery Amp-Hour Capacity to Your

Application

Select a battery or system of batteries that will provide your Inverter

with proper DC voltage and an adequate amp-hour capacity to power

your application. Even though Tripp Lite Inverters are highly efﬁcient

at DC-to-AC inversion, their rated output capacities are limited by the

total amp-hour capacity of connected batteries, plus the output of an

alternator (when one is used).

STEP 1) Determine Total Wattage Required

Add the wattage ratings of all equipment you will connect to your

Inverter. Wattage ratings are typically listed in equipment manuals

or on nameplates. If your equipment is rated in amps, multiply that

number times AC utility voltage to estimate watts. (Example: a drill

requires 2.5 amps. 2.5 amps × 120 volts = 300 watts.)

Step 2) Determine DC Battery Amps Required

Divide the total wattage required (from Step 1, above) by the battery

voltage to determine the DC amps required, then multiply by 1.2 to

account for conversion losses.

Step 3) Estimate Battery Amp-Hours Required

Multiply the DC amps required (from Step 2, above) by the number of

hours you estimate the equipment will operate exclusively from battery

power before recharging the batteries. This will provide an estimate of

how many battery power amp-hours (from one or several batteries) you

should connect to your Inverter.

Note: Battery amp-hour ratings are usually given for a 20-hour discharge rate.

Actual amp-hour capacities are less when batteries are discharged at faster

rates. For example, batteries discharged in 55 minutes provide only 50% of their

listed amp-hour ratings, while batteries discharged in 9 minutes provide as little

as 30% of their amp-hour ratings.

Mounting

WARNING!

Mount your Inverter BEFORE DC battery connection. Failure

to follow these instructions may lead to personal injury and/

or damage to the Inverter and connected systems. Ensure the

inverter never is mounted in a vertical position (fan or outlet side

facing up or down). Mounting an inverter in a vertical position

allows debris to enter the unit and inhibit proper operation of its

cooling system, which can void the inverter’s warranty.

Tripp Lite recommends permanently mounting the Inverter in the

conﬁgurations illustrated below. The Inverter features integral mounting

brackets on the unit. The user can use the included or user-supplied

mounting hardware and is responsible for determining whether

hardware and mounting surfaces adequately support the weight of the

unit.

Use the measurements as shown in the following diagrams to install

two of the included or user-supplied fasteners at the DC side of the

unit, leaving the heads slightly raised. Slide the unit over the fasteners

to engage the mounting bracket slots. Tighten fasteners. Install two

additional fasteners over the remaining mounting brackets in the front

for proper securement.

Flat Surface

Mount

Wall Mount

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Tripp Lite Wechselrichter Handbücher

Tripp Lite

Tripp Lite PowerVerter 200812163 Bedienungsanleitung

Tripp Lite

Tripp Lite PVINT375 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter RV1250ULHW Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter APSX Series Bedienungsanleitung

Tripp Lite

Tripp Lite PINV750 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter APS512 Montage- und Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter PV150 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter RV Inverter/Charger RV1512UL Bedienungsanleitung

Tripp Lite

Tripp Lite APSWX Series Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter PVINT375 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter PV 2000FC Bedienungsanleitung

Tripp Lite

Tripp Lite APSWX Series Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter PV 140 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter RV Inverter/Charger RV2012OEM Bedienungsanleitung

Tripp Lite

Tripp Lite APINT Series Bedienungsanleitung

Tripp Lite

Tripp Lite APS2012SW Konfigurationshandbuch

Tripp Lite

Tripp Lite PowerVerter Plus DC-to-AC Inve Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter Ultra Compact PVINT300 Bedienungsanleitung

Tripp Lite

Tripp Lite EMS1012UL Installations- und Betriebshandbuch

Tripp Lite

Tripp Lite PowerVerter APSX3024SW Bedienungsanleitung

Tripp Lite

Tripp Lite APS 1024 INT Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter APSRM4 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter APSINT2424 Bedienungsanleitung

Tripp Lite

Tripp Lite PowerVerter PV 1000HF Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung