Tripp Lite B119-003-UHD-MN Bedienungsanleitung
1
Owner’s Manual
Compact 4K x 2K UHD
HDMI Switch, 3-Port
Model: B119-003-UHD-MN
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $50 value!
www.tripplite.com/warranty
15-06-114-93347A-EN.indd 1 6/17/2015 3:38:54 PM
2
Table of Contents
Package Contents
Optional Accessories
Package Contents ..............................................2
Product Features ...............................................3
Installation Instructions.......................................4
Troubleshooting .................................................5
Specifications....................................................7
Warranty and Product Registration .......................8
Warning
Use of this equipment in life support
applications where failure of this equipment
can reasonably be expected to cause the
failure of the life support equipment or to
significantly affect its safety or effectiveness is
not recommended. Do not use this equipment in
the presence of a flammable anesthetic mixture
with air, oxygen or nitrous oxide.
• B119-003-UHD-MN Compact 4K x 2K UHD HDMI
Switch
• Remote control
• IR extender receiver
• Owner’s Manual
• P568-Series High-Speed HDMI Cables
15-06-114-93347A-EN.indd 2 6/17/2015 3:38:54 PM
3
Product Features
• Switch between three HDMI source devices
connected to a single port on a monitor
• Switch devices via pushbutton or the included
remote control
• Intelligent Auto Switching functionality will
automatically switch to the next powered-on
device when the power to the current device is
turned off*
• Included IR Extender Receiver allows you to locate
the switch discreetly out of view while maintaining
IR remote control
• Supports 4K x 2K Ultra High Definition (UHD)
video resolutions up to 3840 x 2160 @ 24 Hz or
30 Hz
• Supports up to 48-bit Deep Color
(16 bits per channel)
• Supports DTS-HD, Dolby TrueHD and 7.1 Channel
Surround Sound audio
• 3D, HDCP and EDID compatible
• Plug and play—no software or drivers required
*Auto switching will not work properly if you have a device
that is in sleep mode. Devices must be powered off
completely for auto switch to work properly.
15-06-114-93347A-EN.indd 3 6/17/2015 3:38:54 PM
4
Installation Instructions
1. Make sure the power to all devices that you will
be connecting is turned off.
2. Optional: If you wish to extend the range of the
included remote control, connect the included IR
Extender Receiver to the IR port on the switch.
Locate the receiver unit in an area that allows for
a direct line of sight between it and the remote.
3. Connect an HDMI source device to an Input port
on the switch.
Note: The length of the HDMI cable connecting the
source to the switch must not exceed 16 ft. (5 m).
4. Repeat step 3 to connect source devices to the
remaining Input ports on the switch.
5. Connect the Output port on the switch to the
HDMI input port of your display.
Note: The length of the HDMI cable connecting the
switch to the display must not exceed 16 ft. (5 m).
6. Turn on the power to the HDMI source devices
and display.
7. Switch between source devices via the Select
pushbutton on top of the unit or the included
remote control. You can also let the Auto Switch
functionality automatically switch to ports that are
powered on. When multiple ports have powered-on
devices connected to them, the B119-003-UHD-MN
will switch to the lowest numbered port. Once the
device connected to the lowest numbered port is
powered off, the B119-003-UHD-MN will switch
to the next powered-on port in line.
15-06-114-93347A-EN.indd 4 6/17/2015 3:38:54 PM
5
Troubleshooting
If you are unable to get an acceptable image after
following the installation instructions, try these
troubleshooting tips:
1. Most HDMI source devices are able to provide
the necessary power for the operation of the
HDMI switch. However, in some situations,
the power supply of the HDMI source device is
insufficient, and additional power is required. In
those situations, a 5V 2A DC power supply (not
included) using a 3.5 x 1.35 mm output plug with
positive tip and a negative sleeve can be used.
2. Was the power to the connected devices turned
off prior to installation? If not, restart them.
3. Was the IR Extender Receiver connected after
powering on the connected devices? If so, power
the connected devices off and restart them.
4. What resolution are you trying to reach? The
B119-003-UHD-MN is tested to support 4K x 2K
Ultra High Definition (UHD) video resolutions up
to 3840 x 2160 @ 24 Hz or 30 Hz and 48-bit
(16 bits per channel) Deep Color.
5. What length HDMI cable are you using? (See the
Installation section in this manual for details on
the maximum cable distance.) The shorter the
cable being used, the higher the resolution you
will be able to obtain. If you are not able to get
an acceptable image, try using a shorter cable or
lowering your source’s video resolution or color
depth settings.
15-06-114-93347A-EN.indd 5 6/17/2015 3:38:54 PM
6
Troubleshooting
6. What type of cabling are you using? Inferior
cabling can result in poor performance, so it is
important that you use cables that can support
the video resolution you are trying to obtain. It
is recommended that you use Tripp Lite’s P569-
Series High-Speed HDMI cables, as they have
been tested to work with the B119-003-UHD-MN.
7. Test your cables to ensure they are working
properly. For example, connect your HDMI cable
between a source and a monitor that you know
work to see if the cable is functioning.
8. Is the unit located in an area that exposes
it to higher temperatures? If the product is
overheated, it will not function properly.
15-06-114-93347A-EN.indd 6 6/17/2015 3:38:54 PM
7
Specifications
Connectors
Input (x3) HDMI Female
Output HDMI Female
Video
Maximum Resolution 3840 x 2160
(24 Hz or 30 Hz)
Color Depth 48-bit Deep Color
(16 bits per channel)
Video Amplifier Bandwidth 3.4 Gbps / 340 Mhz
Environmental
Operating Temperature 32° to 113° F (0° to 45° C)
Operating Humidity 10% to 85% RH,
Non-Condensing
Storage Temperature 14° to 176° F (-10° to 80° C)
Storage Humidity 5% to 90% RH,
Non-Condensing
Physical
Unit Dimensions (H x W x D) 0.7 x 3.2 x 2.3 in.
Unit Dimensions (H x W x D) 18 x 80 x 58 mm
Unit Weight 1.9 oz.
Unit Weight 55 g
Power Requirements
External Power Supply Not included*
Power Consumption (Max) 1 W
* Most HDMI source devices are able to provide the
necessary power for the operation of the HDMI switch.
However, in some situations, the power supply of the HDMI
source device is insufficient and additional power is required.
In those situations, a 5V 2A DC power supply (not included)
using a 3.5 x 1.35 mm output plug with positive tip and a
negative sleeve can be used.
15-06-114-93347A-EN.indd 7 6/17/2015 3:38:54 PM
8
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects
in materials and workmanship for a period of one (1) year
from the date of initial purchase. TRIPP LITE’s obligation
under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized
TRIPP LITE service center. Products must be returned to
TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by
a brief description of the problem encountered and proof of
date and place of purchase. This warranty does not apply to
equipment which has been damaged by accident, negligence
or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation
or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE
BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss
of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.
15-06-114-93347A-EN.indd 8 6/17/2015 3:38:54 PM
9
Warranty and Product Registration
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new
Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply.
See website for details.
FCC Notice, Class A
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense. The user must use shielded cables and connectors
with this equipment. Any changes or modifications to this
equipment not expressly approved by Tripp Lite could void the
user’s authority to operate this equipment.
15-06-114-93347A-EN.indd 9 6/17/2015 3:38:54 PM
10
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers
and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment
(WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-
for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this
ultimately becomes waste
Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice.
15-06-114-93347A-EN.indd 10 6/17/2015 3:38:54 PM
Inhaltsverzeichnis
Andere Tripp Lite Schalten Handbücher
Tripp Lite
Tripp Lite B004-008 Bedienungsanleitung
Tripp Lite
Tripp Lite B070-016-19-IP Bedienungsanleitung
Tripp Lite
Tripp Lite B022-U16-IP Bedienungsanleitung
Tripp Lite
Tripp Lite U460-004-2A2C-2 Bedienungsanleitung
Tripp Lite
Tripp Lite NetDirector B024-HU08 Bedienungsanleitung
Tripp Lite
Tripp Lite B030-008-17-IP Bedienungsanleitung
Tripp Lite
Tripp Lite NetController B042-004 Bedienungsanleitung
Tripp Lite
Tripp Lite B004-DP2UA2-K Bedienungsanleitung
Tripp Lite
Tripp Lite WEXT5-B060-032 Bedienungsanleitung
Tripp Lite
Tripp Lite U460-2A2C-IND Bedienungsanleitung
Tripp Lite
Tripp Lite NetDirector B024-DPU08 Bedienungsanleitung
Tripp Lite
Tripp Lite NGS8C2POE Bedienungsanleitung
Tripp Lite
Tripp Lite NetDirector B060-016-2 Bedienungsanleitung
Tripp Lite
Tripp Lite NetController B042-004 Bedienungsanleitung
Tripp Lite
Tripp Lite NetDirector B030-DP08-17DIP Bedienungsanleitung
Tripp Lite
Tripp Lite B022-002-KT-R Bedienungsanleitung
Tripp Lite
Tripp Lite B005-HUA4 Bedienungsanleitung
Tripp Lite
Tripp Lite SU1000RT2U Bedienungsanleitung
Tripp Lite
Tripp Lite B004-DUA2-K-R Bedienungsanleitung
Tripp Lite
Tripp Lite B020-U08-19-K Konfigurationshandbuch
