EN Operating Manual – Digital sound level meter BS06 4
Please note that the measurement of a sound source always has
to be carried out directly. There must be no objects or persons
located in between the microphone and the sound source, unless
their influence on the sound intensity is to be measured on
purpose as well.
MAX/MIN function
By use of the MAX/MIN function you can either read the highest
or the lowest value.
1. Press the MAX/MIN button (2).
– The indication MAX (11) appears on the display.
– The display now indicates the highest sound level
measured since the device was switched on.
2. Press the MAX/MIN button (2) again.
– The indication MIN (8) appears on the display.
– The display now indicates the lowest sound level measured
since the device was switched on.
3. Press the MAX/MIN button (2) for 2 seconds.
– The MAX/MIN function is deactivated and the current
measured value is displayed.
Switch-off
The device comes equipped with an automatic switch-off
function. After 15 minutes of non-use the device switches off
automatically.
• Press the On/Off key (7).
– The device will be switched off.
– The MAX and MIN values are reset.
Battery change
A battery change is required, when the displayed values are
difficult to read or the device can no longer be switched on. See
Inserting the battery on page 3.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Ensure that
no moisture enters the housing. Do not use any sprays, solvents,
alcohol-based cleaning agents or abrasive cleaners. Only use
clean water to moisten the cloth.
Repair
Do not modify the device. Never open the device housing or install
any spare parts. For repairs or device testing, contact the
manufacturer.
In the European Union, electronic equipment must not
be treated as domestic waste, but must be disposed of
professionally in accordance with Directive
2002/96/EC of the European Parliament and Council of
27th January 2003 concerning old electrical and electronic
equipment. At the end of its life, please dispose of this instrument
in a manner appropriate to the relevant legal requirements.
in accordance with the EC Low Voltage Directive 2006/95/EC and
the EC Directive 2004/108/EC about electromagnetic
compatibility.
Herewith, we declare that the digital sound level meter BS06 was
developed, constructed and produced in compliance with the
named EC directives.
The marking is found on the rear of the device.
Manufacturer:
Trotec GmbH & Co. KG
Grebbener Straße 7
D-52525 Heinsberg
Phone: +49 2452 962-400
Fax: +49 2452 962-200
E-mail: info@trotec.com
Heinsberg, 31/03/2014
Managing Director: Detlef von der Lieck
Maintenance and repair
Disposal
Declaration of conformity
