Wuxi Truckrun-e Motor CO.,Ltd
最终解释权属于无锡川克智能电机有限公司 The right of final interpretation belongs to Wuxi Truckrun
Intelligent Motor Co., LTD
Short press the "+" or "-" button to switch the assist gear of the electric bicycle and
change the output power of the motor. The default output power range of the meter is
0-5 gears. highest power. After reaching the 5th gear, short press the "+" button again,
the interface still displays 5, and 5 flashes to indicate that the current is the highest gear.
After the power-assisted downshift reaches the 0th gear, short press the "-" button
again, the interface still displays 0, and 0 flashes to indicate that the current is the
lowest gear, and the default gear of the instrument is 1st gear.
Gear switch interface
◆Power display
Five-segment display of battery power, when the battery voltage is high, the
five-segment LCD lights up.When the percentage is 0,the battery needs to be
Charged immediately.
Power display interface
◆Motor power indication
The output power of the motor can be known through the meter. The display method is
shown in the figure below.
