Trust Handy Scan Colour Bedienungsanleitung

Trust Handy Scan Colour

User's Manual

No part of this manual may be reproduced or transmitted, in

any form or by any means, electronic or mechanical, including

photocopying, recording, or information storage and retrieval

systems, for any purpose other than the purchaser's personal

use, without the prior written permission of the manufacturer.

Disclaimer Statement

The manufacturer specifically disclaims all warranties, either

express or implied, including but not limited to implied

warranties of merchantability and fitness for a particular

purpose, with respect to the software, the product manual(s)

and written materials, and any other accompanying hardware.

The manufacturer reserves the right to revise or make

improvements to its product at any time and without obligation

to notify any person of such revisions or improvements.

In no event shall the manufacturer be liable for any

consequential or incidental damages, including any loss of

business profits or any other commercial damages, arising out

of the use of its product.

* All company or product names are trademarks or registered

trademarks or service marks of their respective owners.

08638en.doc

Table of Contents

Introduction-----------------------------------------------------------------ii

Chapter 1: The Trust Handy Scan Colour------------------------1

Chapter 2: Setup----------------------------------------------------------3

2.1 Installing the Scan Driver-----------------------------------------3

2.2 Installing the Interface Card--------------------------------------3

2.3 Connecting the scanner-------------------------------------------5

Chapter 3: Launching the Image Source (TWAIN)-------------7

Chapter 4: Scantools----------------------------------------------------9

4.1 Installing Scantools-------------------------------------------------9

4.2 Getting ready to use your scanner---------------------------10

4.3 Applying Gamma Correction to Images-------------------- 10

Chapter 5: StitchScan------------------------------------------------- 13

Introduction

Congratulations on the purchase of your new Trust Handy Scan

Colour. Trust Computer Products is one of the leading

companies in the world in the development of the high

performance sheet-fed scanner.

Before you install and operate the new scanner, please take a

few minutes to read through the manual. It provides you the

proper instructions on how to unpack, install, operate and

maintain the scanner.

Safety Precautions

•Keep the scanner out of the sun. Direct sun or excessive

heat may damage the unit.

•Do not install the scanner in a humid or dusty place.

•Retain scanner box and packing material for shipping

purposes.

Chapter 1:

The Trust Handy Scan Colour

Figure 1 The Scanner Body

1. Viewing Window

2. Start Button

3. Brightness Control Dial

4. Clear Plastic Window

5. Rollers

6. Cable Connector

Chapter 2:

Setup

2.1 Installing the Scan Driver

At the beginning of installing ScantoolsTM (the image processing

software that comes with the scanner), if you choose to install

device drivers, the "Installing Device Drivers" dialog box will

appear with a list of drivers for you to choose. Highlight the

driver that corresponds to your scanner model and click the

"Install" button.

2.2 Installing the Interface Card

Figure 2 The 16-bit Interface Card

Note

If you use the parallel port adapter, you don't need to install this interface

card.

The interface card uses four continuous I/O addresses to

control the scanning process. The relationship between the I/O

switch setting and the actual I/O addresses are as follows:

SW1 SW2 SW3 SW4 I/O Address

on off off off 150~151

off on off off 170~171

off off on off 350~351

off off off on 370~371

Only one switch can be set to ON at one time. All other

setting combinations are invalid.

To install the interface card, proceed as follows:

1. Turn off your computer and all peripherals.

2. Remove the computer case as illustrated in Figure 3.

Figure 3 Figure 4

3. Position the computer so that you have a clear view of the

mainboard and its expansion slots. If your computer is a

tower model, first lay the computer on its side with the

mainboard facing up. Choose any unused 16-bit expansion

slot to insert your interface card.

4. Remove the metal plate on the computer case that covers

the opening of the expansion slot you plan to use. You may

need a screwdriver to do this.

5. Remove the interface card from its protective package.

6. Insert the card into the slot (see Figure 4 above). As you

insert the card, always keep the card at a 90° angle to the

mainboard with its golden fingers aligned with the slot. Push

the card in firmly.

7. Use the screws to secure the mounting bracket of the

interface card to the computer case.

8. Replace the computer case.

2.3 Connecting the scanner

1. Make sure your system is off.

2. Align the plug (connector) of the scanner cable with the

socket on the interface card. A small arrow on the plug can

help you with the alignment (see figure 5).

3. Push the plug in firmly to make a secure connection.

Figure 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Trust Scanner Handbücher

Trust

Trust Easy Scan 19200 Plus Bedienungsanleitung

Trust

Trust 240H EASY WEBSCAN GOLD Bedienungsanleitung

Trust

Trust Easy Scan 9600 Plus Bedienungsanleitung

Trust

Trust 7230 Easy Connect Bedienungsanleitung

Trust

Trust FLAT SCAN USB19200 Bedienungsanleitung

Trust

Trust Easy Scan 19200 Bedienungsanleitung

Trust

Trust Easy Connect 9600 Plus Bedienungsanleitung

Trust

Trust Easy Scan 19200 Plus Bedienungsanleitung

Trust

Trust FLAT SCAN USB19200 Bedienungsanleitung

Trust

Trust FLAT SCAN USB19200 Bedienungs- und Wartungsanleitung

Trust

Trust DIRECT WEBSCAN 19200 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung